Dansk

404 page not found

De fundne 43 resultater indeholder ordene: about
  • Fluke Calibration 9144 Metrology Well

    The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

    Produkt
  • Fluke 787 ProcessMeter Digital Multimeter

    Fluke 787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone.

    Produkt
  • 1560 Black Stack Thermometer Readout

    The 1560 Black Stack thermometer readout can be any kind of thermometer you want it to be, and it works in three distinctive ways. It’s a reference thermometer with an accredited calibration; it’s an automated calibration system reading your reference probe and sensors you’re testing; or it’s a high-accuracy data acquisition system. And it does each of these functions better than any other thermometer currently on the market. The Stack consists of up to eight different modules that fit together...

    Produkt
  • 1594A, 1595A Super-Thermometers

    Resistance ratio or absolute resistance measurements: the choice is yours When your goal is to achieve the highest measurement accuracy possible, you will mostly likely make a resistance ratio measurement (Rx/Rs). The measurement accuracy of the 1595A over typical thermometry ratios (0.25 to 4.0) is as good as or better than 0.2 ppm. And for ratios near unity (0.95 to 1.05), the resistance ratio accuracy of the 1595A is as good as 0.06 ppm. You get the linearity of a traditional resistance bridge...

    Produkt
  • 2271A Industrial Pressure Calibrator

    Wide workload coverage for the present and the future The 2271A features pressure ranges from -100 kPa to 20 MPa (-15 to 3000 psi), which covers the requirements of a wide range of gauges and sensors. Thanks to its modular design, the 2271A enables you to install two modules with different measurement ranges within the same chassis. You can purchase modules to match your current workload now; later, when your workload changes and grows, you can easily add ranges, swapping modules in and out according...

    Produkt
  • 2680 Series Data Acquisition Systems

    The Fluke 2680 Series offers the choice of networked data acquisition, stand-alone data logging, or a combination of both. Choose from two basic chassis models: 2680A Data Acquisition System chassis The Fluke 2680A Data Acquisition System is the choice for multi-channel applications requiring reliable Ethernet communications. It features a front-end style data acquisition system that communicates and distributes data anywhere you need it to go. The 10BaseT and 100BaseT communications interface makes...

    Produkt
  • 2680A-904 Trend Link v10

    Trend Graph Trend Graph is capable of showing the trends in a vertical orientation scrolling up or down and in a horizontal orientation scrolling to the right or left. Legend can be placed at the top or bottom of Trend Graph, resized or turned off for more trend viewing. Scales are able to show on the live edge, historic edge, both edges or turned off. Time Display windows can be placed at the top or bottom of Trend Graph, or turned off. Trends are shown in the Trend Graph window with new...

    Produkt
  • 5128A RHapid-Cal® Humidity Generator

    Seven key features of the 5128A RHapid-Cal® Humidity Generator 1. Best-in-class system accuracy for dependable humidity probe calibration The 5128A RHapid-Cal® offers a best-in-class humidity system accuracy of ± 1.0 % RH (7 to 80% RH, 18 °C to 28 °C) which includes all known sources of error such as stability, uniformity, drift, and calibration uncertainty.  Calibrate with confidence using an instrument with comprehensive specifications.  Most competing generators don’t specify...

    Produkt
  • 5502A Multi-Product Calibrator

    A full-functioned calibrator that covers a wide range of common workload The 5502A Multi-Product Calibrator replaces the 5500A and addresses common workload items like 3.5 and 4.5 digit digital multimeters and more. It comes with internal and external protection features that enable you to transport it easily and perform onsite or mobile calibration. The 5502A can also be fully automated with MET/CAL® Plus Calibration Management Software. It is the ideal calibrator for metrology professionals who...

    Produkt
  • 5522A Multi-Product Calibrator

    Rugged carrying case enables safe transport and efficient onsite calibration An innovative carrying case accessory makes it easier than ever to calibrate outside of the calibration laboratory, as well as inside. The shock-mounted case features built-in handles and wheels, enabling you to move the calibrator from place to place easily and safely. The front and rear access doors are removable, so you can calibrate with the 5522A while its top, bottom and side panels remain protected – and avoid having...

    Produkt
  • 5606 Full Immersion PRT

    The 5606 is just two inches (50 mm) in length with a sheath diameter of 1/8 inch (3.1 mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200 °C to 160 °C. The 100 Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving...

    Produkt
  • 5640 Series Thermistor Standards Probes

    Each temperature thermistor probe uses an ultra-stable glass thermistor enclosed in a thin-wall stainless steel tube. The basic semiconductor element is a bead of manganese, nickel, and cobalt oxides mounted on 0.1 mm platinum wires. For long-term stability, the thermistor is aged at various temperatures for 16 weeks. During the aging process, verification of the probe’s stability is done to ensure performance to published specs. The 5640, 5641, and 5642 thermistor probes are designed for the temperature...

    Produkt
  • 5730A High Performance Multifunction Calibrator

    The calibrator for those who demand the best  The 5730A is designed for calibration professionals who require the most accurate dc/lf signals available in a multifunction calibrator, as well as those who simply want the best calibrator available. Metrologists in national laboratories, the military, third party calibration laboratories, and corporate users with high-end workload will value the performance and reliability of the 5730A. All 5730A calibrators are traceable to international standards...

    Produkt
  • 5901 Triple Point of Water Cells

    Heavy water Fluke Calibration cells contain carefully and repetitively distilled ocean water and are meticulously evacuated and sealed to maintain an isotopic composition nearly identical to the international standard, “Vienna Standard Mean Ocean Water," or “VSMOW." The oxygen atoms found in most water are predominantly comprised of eight protons and eight neutrons (16O). Some oxygen atoms, however, have an extra neutron (17O) or two (18O). Similarly, the hydrogen atoms in water normally contain...

    Produkt
  • 6003A Three Phase Electrical Power Calibrator

    Accurate performance for the calibration laboratory Until now, many  engineers and technicians have been testing three-phase devices with a single-phase series-parallel technique, because the cost of available three-phase sources with acceptable accuracies has put true polyphase testing out of reach. With the 6003A, these professionals can now afford three-phase performance, accuracy, and ease of use. More importantly, they can now test multi-phase meters in conditions that reflect their actual...

    Produkt
  • 6270A Pressure Controller / Calibrator

    Calibrate a wide workload—quickly, accurately, dependably The 6270A features pressure ranges from low differential pressure to 20 MPa (3000 psi), which covers the requirements of most gauges and sensors. Three levels of accuracy, 0.02 % FS, 0.01 % reading from 50% to 100 % or 0.01 % reading from 30 % to 100 %, let you balance your need for accuracy with the limits of your budget. Thanks to its modular design, the 6270A is flexible enough that you can install modules with different accuracy classes...

    Produkt
  • 6331/7321/7341/7381 Deep-Well Compact Baths

    Need a bath with a lot of immersion depth, great stability, and a low price tag? How about one that minimizes fluid costs, changes temperatures quickly, and runs quietly? Fluke Calibration's new Deep-Well Compact Bath series features four models covering temperatures from –80 °C to 300 °C. Each model includes a 457 mm (18-inch) deep tank to accommodate long-stem PRTs, SPRTs, and liquid-in-glass (LIG) thermometers. Access openings are 120 by 172 mm (4.7 in by 6.8 in) so you can calibrate many...

    Produkt
  • 6531, 6532 E-DWT Electronic Deadweight Tester Kits

    The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality...

    Produkt
  • 7008/ 7040/ 7037/ 7012/ 7011 Refrigerated Temperature Calibration Baths

    These five baths operate at temperatures as low as –40 °C, and each one is built using CFC-free refrigerants. Fluke Calibration’s proprietary controller design and unique tank construction produce bath stabilities to ±0.001 °C or better. These baths are so stable and uniform that national labs use them for comparison calibrations and fixed-point cell maintenance. Each bath (except the 7011) is fully automatable with a bath interface package and Fluke Calibration’s MET/TEMP II automation...

    Produkt
  • Fluke T5-600 and 62 MAX+ Electrical and HVAC Kit

    This kit helps test for overheated electrical devices using an IR thermometer and using the electrical test tools to learn more about the problem.

    Produkt
  • Fluke 60-seriens håndholdte infrarøde termometre

    This kit helps electricians and HVAC technicians test for overheated electrical devices and use the clamp meter and voltage detector to find out more about the problem.

    Produkt
  • Fluke H80M Protective Holster with Magnetic Hanging Strap

    Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on holster absorbs shocks and protects your DMM, and is especially designed to hang from just about any metal surface.

    Produkt
  • Fluke uddannelsespartner program

    Fluke Educator Partnership Program Sign up for the Educator's Partnership Program and receive a 25% discount for products and materials and be eligible for Fluke grants!* We've teamed up with colleges, trade technical and vocational schools, and apprenticeship programs to bring the latest application information and tools into the classroom. Receive FREE materials PowerPoint presentations Application notes and case studies CDs, DVDs & Posters Free Shipping Equip your labs and help your students...

    Artikel
  • Reduce instrument maintenance costs by 40% or more with route-based work flows

    Using route-based maintenance, technicians are issued multiple tasks and work orders to perform—rather than completing one work order at a time. This practice reduces the time walking to and from the shop and can decrease instrument maintenance costs by 40% or more. Learn about the challenges of implementing a route-based work flow and the top five calibration test tools to improve your efficiency. Speak to a specialist

    Artikel
  • Überprüfen des Zustands von Motoren und Antrieben

    Motors and drives, ubiquitous in industrial settings, can and do fail. Five must-have tests for these systems to prolong motor life and save energy include: thermal, vibration, shaft alignment, insulation resistance and electrical measurements.

    Artikel
  • Fluke Charged Ideas FAQ

    Q: What is involved in the submission process?   A: Fluke Corporation will need two forms completed in order to review your submission Agreement to the legal terms and conditions. Attached materials detailing your idea. Q: What kinds of information should I include in a submission?   A: The attachments should include any valuable information for our product planning team. By explaining how your idea works, what scenario the product is used in and how it is of value, you...

    Artikel
  • Fluke Connect® Frequently Asked Questions

    General   Q: How much does the app cost? A: The mobile app is free to download on compatible devices from the Apple App Store or Google Play. There are multiple options for purchasing subscriptions of Fluke Connect® Assets. Apple Store (iTunes) – One 12 month license subscription costs USD $249.99 Google Play – One 6 month subscription costs USD $149.99 You may also purchase both single and multiple licenses at once for your team. You can get 5-license subscriptions at USD $1,199.99...

    Artikel
  • Erklæring om beskyttelse af personlige oplysninger

    En kundes ret til privatliv er af største vigtighed for Fluke. Når du lader dig registrere på vores websted, beder vi dig angive navn, firma, e-mail-adresse samt andre oplysninger. Vi bruger disse oplysninger til at behandle litteraturforespørgsler og til at holde styr på, hvilke emner vores læsere interesserer sig for.

    Artikel
  • Häufig gestellte Fragen zu Praktika

    Q: What type of interns do you hire?   A: We look for electrical, software, mechanical and industrial engineers. We also have opportunities available for business students in accounting, marketing and operations management disciplines. Q: What can I expect from my internship?   A: You can expect to accept a challenging opportunity that will stretch you to your limits. We design our internship opportunities to be technically challenging and rewarding. You will be working...

    Artikel
  • Kalibreringstjenester

    CalNet®: The European Specialist in Calibration Fluke has its own calibrations laboratories in the United Kingdom, The Netherlands and Germany, and authorized service partners in most of the other countries in Europe. All These calibration laboratories work together as a single calibration network: CalNet. CalNet can issue the calibration certificates you need to meet ISO 9000 standards. CalNet guarantees traceability and access to the best calibration facilities the network can offer. Because of...

    Artikel
  • Insulation Resistance Testing

    This application note is about insulation resistance testing.

    Dokument
  • Olympics And Winter Sports Article

    Article about how winter sports facilities are using Fluke tools to keep conditions perfect for athletes

    Dokument
  • 4332767-How You Measure Energy Matters

    Customers talk about the need for accurate, safe and reliable tools when measuring energy efficiency in buildings.

    Videoer
  • Fluke Thermal Imaging: The Value of Measuring Energy

    Customers talk about the value in measuring energy efficiency in buildings.

    Videoer
  • Energy Measurement and the Bottom Line

    Customers talk about measuring energy usage to make informed decisions and how saving energy can positively affect the bottom line.

    Videoer
  • How Measuring Energy Can Help You Save Money

    Customers talk about energy efficiency and how measurement is important in helping customers make decisions around energy usage. Conducting a commercial building energy audit can help them to save money.

    Videoer
  • Top Five Thermal Inspection Points on a Motor

    Hear from Michael Steward with Fluke Thermography as he talks about using thermal imaging to inspect a common electrical motor for issues that might affect energy usage.

    Videoer
  • Keeping Your Utility Bill Low with Power Factor Checks

    Join Randy Barnet with Fluke as he talks about power factor and with using the Fluke 1735 power logger you can isoloate and identify the power factor problem, including steps on what to do about it.

    Videoer
  • Tilslutning til en mobilenhed

    500 Series Battery Analyzers Mobile Device. To learn more about Fluke Battery Analyzers: http://bit.ly/2gYzsNP

    Videoer
  • Logging Capture and Sample Rate on aFluke 435 II

    In this video, you’ll learn about logging capture and sample rate on a Fluke 435 II.

    Videoer
  • Test Leads Probes and Accessories

    The kit includes all the SureGrip™ leads and probes in a handy roll-up pouch. In this video, you’ll learn about various test leads, probes and accessories.

    Videoer
  • How to Select the Right Fluke IR Window

    Inspect your indoor switchgear safely with the latest IR Windows from Fluke. If you are concerned about arc-flash or electrocution risk, the latest IR Windows can help increase the safety of your personnel and reduce the cost of predictive maintenance, in compliance with indoor/outdoor switchgear codes. In this video, you’ll learn how to select the right Fluke IR window.

    Videoer