Fluke 117/323 Electricians Combo Kit, Digital Multimeter and Clamp Meter

คุณลักษณะสำคัญ

The right combination of tools an electrician needs on the job
Multimeter and clamp meter, test leads, TPAK and carrying case
117: wide array of measurement options all packed into one tool
323: take measurements easily in tight cable compartments

ดาวน์โหลดคู่มือผลิตภัณฑ์ ดาวน์โหลดแผ่นข้อมูลผลิตภัณฑ์

ภาพรวมผลิตภัณฑ์: Fluke 117/323 Electricians Combo Kit, Digital Multimeter and Clamp Meter

Having the right tools for the job is essential. Having them when you need them is even better. Arrive on every jobsite prepared with the Fluke 117/323 electricians multimeter and clamp meter combo kit. The two test tools give you the power of a versatile, rugged multimeter combined with a fast-acting, general-purpose clamp meter.

Whether you work in residential electricity or commercial electrical, both of these test tools are a good fit for the work you need to complete. The kit includes

Fluke 117 digital multimeter
Fluke 323 clamp meter
Tl175 test leads
TPAK ToolPak magnetic meter hanger
Soft carrying case

The Fluke 117 digital multimeter is built to make your life easier with features like:

Non-contact voltage detection
AutoV/LoZ function
Min/Max/Average readings
Frequency measurements
Capacitance measurements

In order to ensure you’re ready to go on many jobsites, the 117 is certified for use in CAT III 600 V environments.

The Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes true rms measurements, optimized ergonomics and a large display for efficient troubleshooting. The small clamp is designed to make measurements in tight cable compartments easier on you and it’s ideally suited for current measurements up to 400 A or voltage measurements up to 600 V.

Together, the Fluke 117 Electrician’s Multimeter and 323 True-rms Clamp Meter give electricians easy to use, time-saving tools for your work.

ข้อมูลจำเพาะ: Fluke 117/323 Electricians Combo Kit, Digital Multimeter and Clamp Meter

Fluke 117 Digital Multimeter

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Fuse for A input	11 A, 1000 V FAST Fuse (Fluke PN 803293)
Display	Digital: 6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating temperature	-10 °C to +50 °C
Storage temperature	-40 °C to +60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery life	400 hours typical, without backlight
Accuracy Specifications
DC millivolts	Range/Resolution	600.0 mV / 0.1 mV
DC millivolts	Accuracy	±([% of reading] + [counts]): 0.5% + 2
DC volts	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V
DC volts	Accuracy	±([% of reading] + [counts]): 0.5% + 2
Auto volts	Range/Resolution	600.0 V / 0.1 V
Auto volts	Accuracy	2.0% + 3 (DC, 45 Hz to 500 Hz) 4.0% + 3 (500 Hz to 1 kHz)
AC millivolts¹ True RMS	Range/Resolution	600.0 mV / 0.1 mV
AC millivolts¹ True RMS	Accuracy	1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz)
AC volts¹ True RMS	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V
AC volts¹ True RMS	Accuracy	1.0% + 3 (DC, 45 Hz to 500 Hz) 2.0% + 3 (500 Hz to 1 kHz)
Continuity	Range/Resolution	600 Ω / 1 Ω
Continuity	Accuracy	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution	600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ
	Accuracy	0.9% + 1
	Range/Resolution	40.00 MΩ / 0.01 MΩ
	Accuracy	5% + 2
Diode test	Range/Resolution	2.00 V / 0.001 V
Diode test	Accuracy	0.9% + 2
Capacitance	Range/Resolution	1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF
	Accuracy	1.9% + 2
	Range/Resolution	> 1000 μF
	Accuracy	5% + 20%
Lo-Z capacitance	Range	1 nF to 500 μF
Lo-Z capacitance	Accuracy	10% + 2 typical
AC amps True RMS (45 Hz to 500 Hz)	Range/Resolution	6.000 A / 0.1 A 10.00 A / 0.01 A
AC amps True RMS (45 Hz to 500 Hz)	Accuracy	1.5% + 3 20 A continuous overload for 30 seconds max
DC amps	Range/Resolution	6.000 A / 0.1 A10.00 A / 0.01 A
DC amps	Accuracy	1.0% + 3 20 A continuous overload for 30 seconds max
Hz (V or A input)²	Range/Resolution	99.99 Hz / 0.01 Hz 999.99 Hz / 0.1 Hz 9.999 Hz / 0.001 Hz 50.00 Hz / 0.01 Hz
Hz (V or A input)²	Accuracy	0.1% + 2

1. All AC voltage ranges except Auto-V/LoZ are specified from 1% to 100% of range. Auto-V/LoZ is specified from 0.0 V.
2. Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.

- Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current.

Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F.

Mechanical and General Specifications
Size	167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in)
Weight	550 g
Warranty	3 years

Fluke 323 True RMS Clamp Meter

Specifications
AC current	Range	400.0 A
AC current	Accuracy	2% ±5 digits (45 Hz to 65 Hz) 2.5% ±5 digits (65 Hz to 400 Hz)
AC voltage	Range	600.0 V
AC voltage	Accuracy	1.5% ±5 digits
DC voltage	Range	600.0 V
DC voltage	Accuracy	1.0% ±5 digits
Resistance	Range/Resolution	400.0 Ω/ 4000 Ω
Resistance	Accuracy	1.0% ±5 digits
Continuity	≤ 70 Ω
AC response	True RMS
Data hold	Yes
Size	H x W x D (mm)	207 x 75 x 34
	Max wire diameter	30 mm (600 MCM)
	Weight	265 g
Category rating	CAT III 600 V CAT IV 300 V
Warranty	Two-year

รุ่น: Fluke 117/323 Electricians Combo Kit, Digital Multimeter and Clamp Meter

Fluke 117/323 Kit

Fluke 117/323 Electricians Multimeter Combo Kit

ซื้อเลย

Includes:

Fluke 117 Digital Multimeter
Fluke 323 True RMS Clamp Meter

คู่มือและแหล่งข้อมูล: Fluke 117/323 Electricians Combo Kit, Digital Multimeter and Clamp Meter

คู่มือ (10)