The most trusted tools in the world
Home  |  Products  |  Clamp Meters  |  

Fluke 375 True-rms AC/DC Clamp Meter

Helping you get it done.

The Fluke 375 is a workhorse clamp meter with increased performance and flexibility.

Contact Me
Fluke 375
Fluke 375
Fluke 375
Fluke 375

Be ready for anything.

With true-rms ac voltage and current measurements, the Fluke 375 Clamp Meter can read up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.

Safety Conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV

Features and benefits

  • iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
  • CAT IV 600 V, CAT III 1000 V
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • 500 mV dc measurement range to interface with other accessories
  • Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing protective equipment
  • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case

Safety conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV

What’s the difference between the clamp meter models?

  Fluke-365 Fluke-373 Fluke-374 Fluke-375 Fluke-376 Fluke-381
Measure ac current 200.0 A 600.0 A 600.0 A 600.0 A 999.9 A 999.9 A
Measure ac current via iFlex     2500 A 2500 A 2500 A 2500 A
Measure ac voltage 600.0 V 600.0 V 600.0 V 600.0 V 1000.0 V 1000.0 V
Measure continuity ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω
Measure dc current 200.0 A   600.0 A 600.0 A 999.9 A 999.9 A
Measure dc voltage 600.0 V   600.0 V 600.0 V 1000.0 V 1000.0 V
Measure resistance 6,000 Ω 6,000 Ω 6,000 Ω 60k Ω 60k Ω 60k Ω
Measure frequency       500 Hz 500 Hz 500 Hz
Measure inrush     100 mS 100 mS 100 mS 100 mS
Work in poorly lit areas Backlight Backlight Backlight Backlight Backlight Backlight
Measure non-linear loads True-rms True-rms True-rms True-rms True-rms True-rms
Specifications
Diameter of measurable conductor 1.3 or 34 mm max
Operating temperature -14 to 122ºF (-10 to 50ºC)
Storage Temperature -40 to 140ºF (-40 to 60ºC)
Operating Humidity < 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating Altitude 0 to 3000 m
Size 246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.)
Weight 388g, (14 oz.)
Temperature Coefficient 0.01% ºC
(<18ºC or > 28ºC)
Warranty Three years for electronics
One year for cable and clamp assembly
Model NameDescription
Fluke 375

True-rms AC/DC Clamp Meter

Included accessories:

  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • TL75 test leads
  • Two AA Alkaline batteries

Clips
AC220AC220 SureGrip™ Alligator Clips
AC87AC87 Heavy Duty Bus Bar Clip Set
AC89AC89 Heavy Duty Insulation Piercing Test Clip

Test Probes
TP1TP1 Slim Reach Test Probe Set

Cases and Holsters
C550C550 Tool Bag
CAMO-37Camouflage Carrying Case

Lights
L206L206 Deluxe LED Hat Light
LVD1LVD1 Volt Light

Test Leads
TL75TL75 Hard Point™ Test Lead Set
        
Related Products
 
 C781 Meter Case »
 
 TL175 TwistGuard™ Test Leads »
 
 TLK-220 SureGrip Industrial Test Lead Kit »
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2014 Fluke Corporation