|
|
|
The entry-level instrument for electricians and technicians
You won’t find a better or more rugged entry-level thermal imager. Just point and shoot to capture the full picture, showing the hotspots that warn of imminent equipment failure.
The 160 x 120 resolution shows all the essential details. That greatly increases the speed of inspecting, repairing and verifying electrical and (electro)mechanical equipment. It also helps extend equipment lifetime and avoid electrical fires.
Rugged and easy to use
Rated to IP54, the Ti9 resists dust and water and withstands a drop test of 2 meters.
|
Fluke Ti9 Thermal Imager
5
5
1
1
Another great product from Fluke...
Okay, I'll admit that I've always been a big fan of Fluke test gear (I don't use any other brand#, but this new Ti9 still impresses me. I did a lot of research and looked at and 'test-drove' all of the competition, but the final choice was easy. Great camera, easy to use and yet powerful reporting software #the software is one of the best parts of the deal#, a nice case, etc. The only downside to the whole I.R. thermography thing is that once you get started you will likely be inundated with work. Our very first job with the camera has to date netted us in excess of $35k in repair work at a large manufacturing plant that was suffering from a very bad case of 'deferred maintenance payback' so if you get one of these fine little cameras be prepared for some long days...
June 7, 2012
|
|
- Delivers the clear, crisp images needed to find problems fast.
- Optimized for field use in harsh work environments.
- Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool?
- Withstands dust and water—tested to an IP54 rating.
- Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.
- Adjustable hand strap for left-or right-handed use.
|
|
| Temperature |
| Temperature measurement range (not calibrated below -10 °C) |
-20 °C to +250 °C (-4 °F to + 482 °F) |
| Accuracy |
± 5 °C or 5 % (whichever is greater) |
| Imaging Performance |
| Field of view |
23° x 17° |
| Spatial resolution (IFOV) |
2.5 mRad |
| Minimum focus distance |
Thermal lens: 15 cm (6 in) |
| Focus |
Manual |
| Image frequency |
9 Hz refresh rate |
| Detector type |
160 X 120 focal plane array, uncooled microbolometer |
| Infrared lens type |
20 mm F = 0.8 lens |
| Thermal sensitivity (NETD) |
≤ 0.2 °C at 30 °C (200 mK) |
| Infrared spectral band |
7.5 μm to 14 μm |
| Image Presentation |
| Palettes |
Ironbow, blue-red, high contrast, grey |
| Level and span |
Smooth auto-scaling and manual scaling of level and span |
| Minimum span (in manual mode) |
5 °C (9 °F) |
| Minimum span (in auto mode) |
10 °C (18 °F) |
| Image and Data Storage |
| Storage medium |
SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR or 3000 basic (.bmp) IR images) |
| File formats |
Non-radiometric (.bmp) or fully-radiometric (.is2)
No analysis software required for non-radiometric (.bmp) files |
| Export file formats w/SmartView® software |
JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF |
| General Specifications |
| Temperature -Operating: |
-10 °C to 50 °C (14 °F to 122 °F) |
| Temperature - Storage: |
-20 °C to +50 °C (-4 °F to 122 °F) without batteries |
| Display |
9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto) |
| Controls and adjustments |
- User selectable temperature scale (°C/°F)
- Language selection
- Time/Date set
|
| Software |
SmartView® full analysis and reporting software included |
| Battery: |
Internal rechargeable battery pack (included) |
| Battery life: |
Three to four hours continuous use (assumes 50 % brightness of LCD) |
| Battery charge time using ac adapter/charger and dc car charger: |
Two hours for full charge |
| AC operation/charging |
AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included. |
| Power saving |
Sleep mode activated after 5 minutes of inactivity, automatic power off after 20 minutes of inactivity |
| Safety standards |
CE Directive: IEC/EN 61010-1 2nd Edition Pollution Degree 2 |
| Electromagnetic compatibility |
- EMC directive: EN61326-1
- C-Tick: IEC/EN 61326
- US FCC: CFR 47, Part 15 Class A
|
| Vibration |
2 G, IEC 68-2-29 |
| Shock |
25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides} |
| Dimensions (HxWxL) |
0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in) |
| Weight |
1.2 kg (2.65 lb) |
| IP rating |
IP54 |
| Warranty |
Two-years |
| Calibration cycle |
Two-years (assumes normal operation and normal aging) |
| Supported languages |
English, Italian, German, Spanish, French, Russian, Portuguese, Swedish, Turkish, Czech, Polish, Finnish, Simplified Chinese, Traditional Chinese, Korean, and Japanese |
|
| Model Name | Description | Price List | Buy it | | Fluke Ti9 | Thermal Imager
Thermal imaging camera w/ 20 mm lens.
Includes:
- AC power supply/battery charger (including mains adapters)
- SD memory card
- SD card reader (USB) for downloading images into your computer
- SmartView® software with free software upgrades for life
- Rugged hard carrying case
- Soft transport bag
- Hand strap
- Users manual
- Warranty registration card
|
|  | |
| Thermal Imaging Accessories | Buy it | | TI-Visor | Visor for Ti32, Ti29, Ti27, Ti25, Ti10, Ti9, TiR32, TiR29, TiR27, TiR1, TiR, TiRx and TiS | | |
|
|
|
|
|
|
|
|