The most trusted tools in the world
Home  |  Support  |  Software Downloads  |  Vibration Software

Vibration Software Downloads

To get these new features you will need to register your product and then you will be provided with update instructions. If you have already registered your product simply register it again.


Fluke 805 Vibration Meter Firmware »

Version Date Description
1.0.7 10/12/2012
  • Battery life improvement with sleep mode
  • Language updates
    • 1.0.2 8/23/2012
  • Battery life improvement
  • Battery type selection added to Instrument Setup
  • Flashlight only on when button is held down
    • 1.0.1 7/24/2012
  • Addition of Nordic Languages to the User Interface
  • Second level machine setup update
    •  

    To upgrade the Meter:

    1. Download the upgrade file for the Meter by clicking the above link.
    2. Connect the USB cable to the PC or laptop.
    3. Make sure the Meter is off.
    4. Simultaneously push and hold Setup button and > button as you connect the other end of the USB cable to the Meter.
    5. The Meter boots up in the firmware upgrade mode and stays on while it is connected to the PC.
    6. Identify the external disk that is the Meter in an Explorer window on the computer.
    7. Make a copy of the upgrade file to the external disk that is the Meter.
    8. Right-click on the external disk and select eject.
    9. Disconnect the Meter from the host PC.
    10. Restart the Meter.

    The Meter operates with the new firmware after the restart.

     

    Fluke 805 Vibration Meter Trending Template

    Export and trend in Microsoft® Excel 

    Fluke 805 Vibration Meter Trending Template Version 1.7 »

    Trending vibration measurements over time is the best method to track machine health.

     

    With the Fluke 805 you can easily:

    • Export your results to Microsoft® Excel through a USB connection
    • Trend the readings with the built-in templates and plot graphs
    • Compare the overall vibration readings to ISO Standards (10816-1, 10816-3, 10816-7)

    Import measurements from the Fluke 805 Vibration Meter to an Excel template on your PC in order to trend the bearing parameters: overall vibration, CF+ and temperature. The user can now see a clear picture of the changing bearing condition and deteriorating health of the machine.

    Instructions for installing the template »
    Instructions for trending and printing »
     

    Fluke 810 Vibration Tester Firmware and Software


     

    Fluke 810 Viewer PC Software 1.5.19 Upgrade

    Viewer Software v. 1.5.19 Upgrade (32 bit) »
    Viewer Software v. 1.5.19 Upgrade (64 bit) »
    *If you don't know whether your PC is 32 bit or 64 bit, please follow the steps detailed at the following Microsoft website: http://support.microsoft.com/kb/827218

    What is new?

    • Ability for uploading multiple thermal images to a single drive train
    • Addition of Nordic Languages (Dutch, Norwegian, Swedish, Danish and Finnish)

    IMPORTANT NOTE: Please make sure that you back up your data prior to the installation. Read the following instructions prior to installation if you have a previous version of Viewer Software installed.

    A. Upgrading to Viewer version 1.5.19 from Viewer version 1.0.8 or higher

    1. Open Viewer Software.
    2. Click on the "Preferences" menu at the top.
    3. Select "Take Backup" from the menu at the left.
    4. Click the "Browse" button to select the location for the backup file and then click "Create Backup" button.
    5. Once backup is created, uninstall the current version of the Viewer Software by clicking "Uninstall Viewer Software" from Start » Programs » Fluke.

    Install version 1.5 by clicking on the .exe file, you previously downloaded from the link above.

    Once the installation is complete, please restore your backup data by following the steps below:

    1. Open Viewer Software.
    2. Click on "Preferences" menu at the top.
    3. Select "Restore Backup" from the menu at the left.
    4. Click the "Browse" button to select the location of the backup file you created prior to installation and then click the "Restore Backup" button.

    B. Upgrading to Viewer version 1.5.19 from Viewer versions prior to 1.0.8

    If you are upgrading to Viewer 1.5.19 from Viewer versions prior to 1.0.8, the upgrade will erase all machine setup and diagnostic history from your PC.

    Restoring erased data to the Viewer software application:

    1. To recover data transferred from the Tester into Viewer software but NOT deleted from the Tester, upload data back into the updated v.1.5 Viewer software using the normal Transfer function within the software.
    2. To archive data previously transferred to Viewer then subsequently deleted from the Tester, we recommend generating a .pdf report for each machine setup using the Report function within the Viewer software PRIOR TO UPGRADING TO V.1.5 Data gathered prior to the upgrade cannot be restored to the Tester.

    Viewer 1.5 is compatible with 32 bit and 64 bit Windows XP, Vista and Windows 7 operating systems.

     

    Fluke 810 Vibration Tester Firmware v 2.24 »

    Firmware upgrade instructions (.pdf) »

    Version Date Description
    2.24 8/24/2012
  • Addition of Nordic Languages to the User Interface
  • Calibration error fix
    • 2.20 6/18/2012 Spanish language translation updates
    2.19 12/31/2011
  • Spanish and Italian language translation updates
  • Minor bug fix to allow complete diagnostic display in all languages when scrolling
    • 2.16 5/27/2011
  • Minor bug fix to allow complete diagnostic display in all languages when scrolling
    • 2.15 4/14/2011

    Minor bug fix to allow complete diagnostic display in French language when scrolling

    2.14 4/1/2011
  • User interface enhancements related to number of measurement locations for close-coupled machines
  • French language updates
    • 2.13 3/17/2011

    User interface enhancements related to machine setup

    2.12 2/17/2011

    Spanish language updates

    2.11 1/12/2011

    Spanish language updates

    2.10 11/16/2010
  • Chinese and Spanish language updates
  • Minor bug fixes
    • 2.9 10/11/2010

    Minor bug fixes

    2.8 9/27/2010
  • Improved tachometer performance in terms of data capture speed
  • User interface enhancements to provide access to measurement history via the Diagnosis screen
    • 2.7 6/16/2010
  • Updated diagnostic engine
  • Minor bug fixes
    • 2.6 5/10/2010
  • German language updates
  • User interface enhancements to battery charging progress indicator
    		•
            
    Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2013 Fluke Corporation