Application Notes, Case Studies, White Papers and Technical Briefs

Home | Support | Application Notes | Fluke Technical Papers |

Fluke Technical Papers

A New Method for the Calibration of the mV Ranges of an AC Measurement Standard »
A Poor Man's Resistance Bridge ^* »
A Study of and Recommendations for Applying the False Acceptance Risk Specification of Z540.3 »
A study on the stability of standard platinum resistance thermometer in the temperature range from 0 degrees C through 720 degrees C »
An Assessment of Artifact Calibration Effectiveness for a Multifunction Calibrator ^* »
An investigation of long-term stability of a precision platinum resistance thermometer up to 660 degrees C ^* »
Calibration Intervals, a Manufacturer's Perspective »
Characterization of the Power Coefficient of AC and DC Current Shunts »
Comparison Between Melting and Freezing Points of Aluminum and Silver »
Control Charting Laboratory References for Quality Control »
Design and implementation of a fully automated crossfloat system for the comparison of piston guages in guage and absolute measurement modes »
Determining Size of Source for Handheld Infrared Thermometers – Theory and Practice »
Easing the problem of traceability for complex waveforms by optimizing instrument design ^* »
Emissivity– The Crux of Accurage Radiometric Measurement »
Enhancing Reliability in a Multi-Function Calibrator Using Thermal Design »
Evaluation of out-of-tolerance risk in measuring and test equipment »
Fluke Accreditation Experiences »
Gaining accreditation for an american standards laboratory »
Having Confidence in Specification* »
How does temperature non-uniformity of an annealing furnace affect SPRT stability? »
Infrared uncertainty budget determination in an industrial application »
Low voltage traceability and uncertainty evaluation for high accuracy thermocouple calibration utilizing a modern automated potentiometer »
Maintaining 10 VDC at 0.3 ppm or Better in Your Laboratory »
Maintaining In-Situ Traceability on the Factory Floor with Process Metrology »
Maintaining ISO 17025 Compliance ^* »
Measurement Methods for RF & Microwave Calibration Source »
Measuring Output VSWR For An Active Levelled Source »
Methods for Evaluating the Condition of Platinum Resistance Thermometers »
Quality control of fixed-point cells during manufacturing »
Study of a New Fixed-Point System for Calibration of Short Secondary Platinum Resistance Thermometers »
The Challenges of Precision Analog Modulation Measurement »
The Legacy Database and Part 11 »
Understanding phase noise in calibration applications »
Verifying the Wideband Input of an AC Measurement Standard »
* Registration is required to view these application notes. You will only be asked to register once.


Home \| Site Map \| Fluke Corporation \| Safety Notices \| Terms and Conditions \| Privacy Statement \| Disclaimer	© 1995 - 2013 Fluke Corporation