The most trusted tools in the world
Home  |  Solution Centers  |  Process Control - Instrumentation  |  Glossary of Temperature Calibration Terms
 

Glossary of Temperature Calibration Terms

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Dry Well Calibrator

A temperature calibrator that uses a precision oven to source precise temperature. This style of calibrator is often used for the verification of temperature sensors.

Excitation Current

A constant current applied to an RTD probe to determine actual resistance for temperature measurement. Typical values are 2 mA or less to minimize self-heating of the probe.

IPTS-68

International Practical Temperature Scale of 1968. A temperature standard adopted in 1968 that uses intrinsic standards to define the measurement of temperature.

ITS-90

International Temperature Scale of 1990. A temperature standard adopted in 1990 that uses intrinsic standards to define the measurement of temperature. This standard modifies the intrinsic standards of IPTS-68 with additional intrinsic references.

Lead Resistance Compensation

A compensation method used with 3 and 4 wire RTDs and resistance measurement. This method negates the error associated with lead resistance when making an RTD measurement.

Reference Temperature

The temperature at which a thermocouple temperature measurement is referenced. For Fluke Calibration tools, this is the temperature where the thermocouple mini-plug is connected to the calibrator.

Rφ

The resistance value of an RTD probe at 0 °C. Example PT100-385, Rφ = 100 Ω.

RTD

Resistance Temperature Device, a temperature measurement sensor that has predictable changes in resistance with a change in temperature. The most common RTD is the platinum PT100-385.

Seebeck Effect

Thermoelectric effect in which the voltage potential increases with temperature (thermocouples) in a junction of dissimilar metals.

Triple Point of Water

This temperature reference point is the intrinsic standard at which water is liquid, ice and gas. This reference point defines 0.01 °C.
        

Other Glossaries

DMM products glossary »
Electrical glossary »
Loop calibration terminology »
Pressure calibration terminology »
Vibration glossary »
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2013 Fluke Corporation