|
|
Now You Can Get More From a Tester
The Fluke T2 is a voltage and continuity tester that's designed to work long and hard. There are no settings - just probe the circuit and the T2 will show you whether you're looking at ac volts, dc volts, or an open circuit. You don't even have to turn it on or off! With seven different voltage indicators, it can clearly differentiate between key voltage levels.
Features at a Glance:
- LEDs clearly indicate seven ac and seven dc nominal voltage levels
- Indicates dc voltages as low as 6V
- DC polarity indicator
- Compact and rugged_fits in a tool pouch or overall pocket
- Automatically selects continuity beeper or voltage measurement
- Can stay connected much longer than solenoid type testers
- Rugged enough to withstand a 10-foot (3m) drop
- Protected to 1000V input, for use in CAT III environments
- Automatically activates and shuts down to conserve battery power
- Heavy-duty test leads for long life
|
|
| General Specifications |
| Electrical |
| Continuity threshold: |
Beeper on at <150,000W, Beeper off at >300,000W |
| Input impedance: |
Approximately 1 MW |
| AC frequency response: |
45 Hz to 66 Hz |
| | Voltage levels: |
| U.S. Version |
|
| VAC |
24, 120, 208, 240, 277, 480, 600 |
| VDC |
6, 12, 24, 36, 48, 110, 220 |
| Worldwide Version |
|
| VAC |
12, 24, 48, 110, 230, 400, 690 |
| VDC |
6, 12, 24, 36, 48, 110, 220 |
| Canada Version |
|
| VAC |
24, 120, 208, 240, 347, 480, 600 |
| VDC |
6, 12, 24, 36, 48, 110, 220 |
| | Battery |
| Type: |
(2) AA Carbon Zinc |
| Life: |
250 hours |
| | Test leads |
| Type: |
Fixed. Replaceable by service technician or service center |
| Wire: |
Heavy duty, extra flexible with black insulation rated for a breakdown of 1000V |
| Probes: |
Shipped with one of two nonremovable tip styles, U.S. (flat blade) or European (4mm); one red, one black |
| | Environmental requirements |
| Operating temperature: |
-10°C to +50°C |
| Storage temperature: |
-30°C to +60°C indefinite |
| Humidity |
0% to 95% (0°C to 30°C) |
|
0% to 75% (30°C to 40°C) |
|
0% to 45% (40°C to 50°C) |
| Dust/water resistant |
|
| Operating altitude: |
3000m minimum |
| | Mechanical |
| Size: |
1.3" H X 1.8" W X 6.3"L
(33 mm x 46 mm x 16 mm) |
| Weight: |
7 oz (approximate) |
| | Safety |
| Maximum operating voltage: |
1000V ac/dc between any terminal and earth ground (protection only) |
| Protection classes: |
Pollution Degree II, Overvoltage Category III per IEC 61010-1 |
| Agency approvals: |
UL, CSA, and VDE |
| Manufacturer's certification: |
CE |
| | Warranty | | | Calibration | |
|
| Model Name | Description | Price List | Buy it | | T2 | Voltage and Continuity Tester including instruction sheet
|  | |
| Cases and Holsters | Buy it | | C520A | C520A Leather Tester Case | |  | | H5 | H5 Electrical Tester Holster | | |
|
|
|
|