|
|
|
The pocket-sized voltage detector
The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
|
Fluke 1AC-II / 1LAC-II VoltAlert
5
5
2
2
Quick and dirty
I carry one of these in my shirt pocket, it's the first thing I grab for any type of electrical problems. I'll admit I don't trust it with my life even though I've never had a false negative, only the occasional false positive from it (usualy due to motor/microwave/high voltage circuits with loaded capacitors, which do still present a safety risk, but can falsely imply you have power even when you don't). I'll still put a real meter and even short to ground before I go sticking my hands in anything. This does however tell you very quickly if the problem is in the device/equipment in question, or just no power getting to it, a real time saver. Its so simple to use even my 7 year old grabs it to test for power if the light or TV doesn't come on, or to confirm his rechargeable toys are getting power to them. Something not working? Just hold the tip near the power cord, its literally that easy to use, confirms right away if you're getting power to it or not.
September 29, 2012
Handy
This is a much used little devise.
Works great, visual & sound when live wire is detected.
Thru wires without having to puncture with meter & probes.
Just get it close to current & it'll pick it up.
September 15, 2012
|
|
- Voltbeat™ technology and continuous self-test — so you always know it’s working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
|
|
|
| Specifications |
| Operating principle |
|
Senses the steady state electrostatic
field produced by ac
voltage through insulation
without requiring contact to the
bare conductor. A red glow at
the tip and a beeping noise (if
not switched OFF) indicates the
presence of voltage. |
| | Voltage sensing ranges |
|
Nominally, 90 V AC to 1000 V
AC or 200 V AC to 1000 V AC
depending on model, 45 Hz to
405 Hz; also a 20 V to 90 V
control circuit model |
| | Detector tip style |
|
Blade or round, depending
on model |
| | Light source |
|
One high intensity red LED |
| | Agency Approvals | | | Safety Rating | | | IP Rating | | | Operating Temperature | | | Operating humidity ranges |
| 0 % to 95 % |
(0 °C to 30 °C) |
| 0 % to 75 % |
(30 °C to 40 °C) |
| 0 % to 45 % |
(40 °C to 55 °C) |
| | Operating Altitude | | | Batteries |
|
2 AAA alkaline batteries
included |
|
Note: Product does not respond to random
electrostatic discharge.
|
| Model Name | Description | Price List | Buy it | | Fluke 1AC A1 II | ACV Detector 90-1000V, ENGL/LASPN/CFR Flat-tip |  | | | Fluke 1LAC A II | Low Voltage Detector 20-90 VAC AMERICAS PACIFIC Round-tip
| | | | Fluke 1AC A1 II 5PK | Volt Alert, 5 Pack For USA, ENGL/LASPN/CFR Flat-tip
| | | | Fluke 1AC A2 II | ACV Detector 90-1000V, BRPORT/JAP/CHIN-T Round-tip
| | | | Fluke 1AC E1 II |
ACV Detector 200-1000V, ENGL/GER/FREN/DUTCH
Round Tip
| | | | Fluke 1AC E2 II | ACV Detector 200-1000V, DANSH/NORW/SWED
Round-tip
| | | | Fluke 1AC E1 II 5PK | VoltAlert, 5 Pack for EUROPE, ENGL/SPN/FREN
Round-tip
| | |
|
|
|
|