|
|
|
A complete automotive diagnostic package with everything you need in an automotive multimeter
Fluke 88V has replaced the 88. For information on the discontinued 88 »
The Fluke 88V has improved measurement functions, troubleshooting features and accuracy to solve more problems on conventional and hybrid vehicles. The 88V is made in the U.S.A. and carries the industry leading lifetime warranty.
The Fluke 88V operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.
Combo Kit Includes: 88V multimeter, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual.
The 88V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.
|
Automotive Multimeters: Fluke 88V/A Automotive Multimeter Combo Kit
5
5
2
2
Amazing!
I love it,it has everything,totally recommend! Two thumbs UP
October 7, 2012
Simply AMAZING
I have used Fluke meters for over twelve years without a single problem. It is amazing that an instrument that is so sophisticated can be so tough and TOTALLY RELIABLE! The 88V is the best there is!
June 9, 2012
|
 |
New features for maximum productivity - Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
- Peak min/max to capture intermittent events as short as 250 micro seconds
- Large digit display with bright, two-level backlight makes the Fluke 88V significantly easier to read than the old Fluke 88
|
| Features |
| Lifetime warranty |
| 6000 counts, 3-3/4 digits |
| Measure up to 1000 V ac and dc |
| Measure up to 10 A, 20 A for up to 30 seconds |
| Built in thermometer lets you carry one less tool (temperature probe included) |
| Frequency to 200 kHz and % duty cycle |
| Resistance, continuity |
| RPM measurements with inductive pickup |
| Millisecond pulse width measurements for fuel injectors |
| Magnet hanger to attach meter to the vehicle and free your hands for other tasks |
| 10,000 µF capacitance range for components and motor caps |
| Min/Max-Average recording with Min/Max Alert to capture variations automatically |
| Peak capture to record transients as fast as 250 µs |
| Relative mode to remove test lead interference from low ohms measurements |
| Auto and manual ranging for maximum flexibility |
| Touch Hold to capture stable readings avoiding noisy signals |
| Large display digits and two-level bright white backlight for increased visibility |
| Analog bargraph for fast changing or unstable signals |
| Input Alert provides audible warning against wrong use of input jacks |
| Improved selectable sleep mode for long battery life |
| Access door for fast battery changes without opening up the case |
| "Classic" design with new removable holster with built in test lead and probe storage |
| 10 meg ohm input impedance wont load circuits |
| 0.1 % dc accuracy | Position the meter in the most usable location with the magnetic hanger
The holster on the new Fluke 88V accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces. This allows you to focus on taking measurements instead of holding the meter in your hand. Electrical safety
All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges
|
Fluke 88V/A Automotive Combo Kit Includes:
 |
- Fluke 88V Automotive Multimeter
- TL224 1.5 m long heat resistant silicone test leads
- TP220 Removeable test probes to pierce corroded terminals
- AC285 SureGrip Large Jaw Alligator Clip Set
- TPAK Magnetic hanger to position and hold meter to steel surfaces
- 80BK Temperature probe
- RPM80 Inductive RPM pick-up probe
- C800 Hard carrying case
- 2 Automotive Backprobe pins
- Insulation Piercing Probe
| See how the new Fluke 88V compares to the original Fluke 88
|
 |
 |
|
| Function |
Original 88 |
Fluke 88V |
Productivity Increase |
| Built in thermometer |
No |
Yes |
No need to carry a separate thermometer |
| VDC accuracy and resolution |
0.15%, 0.1 mV |
0.10%, 0.1 mV |
Precise measurements in a hand held package |
| Display digits |
13.5 x 7 mm |
15.25 x 8.5 mm |
30% larger makes it easy to read |
| Backlight |
Green |
2-level, bright white |
Easier to read in dark locations |
| Magnetic hanger |
No |
Included with kit |
Position meter for easy viewing |
| Peak capture |
No |
250 µs |
Record intermittent problems 4 times faster |
| Capacitance |
No |
5 nF to 10,000 µF |
Measure components |
| CAT electrical safety rating |
No |
Yes, 2nd edition ANSI and IEC |
Increased protection from 8 kV spikes that can cause arc flash |
| Battery door |
No |
Yes |
Change battery quickly without breaking cal seal |
| Warranty |
Expired |
Limited Lifetime |
Lower cost of ownership |
|
| Technical Specifications |
| DCV |
| Maximum Voltage: |
1000V |
| Accuracy: |
Fluke 88 V: ±(0.1%+1) |
| Best Resolution: |
Fluke 88 V: 0.01 mV |
| | ACV |
| Maximum Voltage: |
1000V |
| Accuracy: |
Fluke 88 V: ±(0.5%+2) |
| AC Bandwidth: |
Fluke 88 V: 5kHz |
| Best Resolution: |
0.01 mV |
| | DC Current |
| Maximum Amps: |
10A |
| Amps Accuracy: |
Fluke 88 V: ±(0.4%+2) |
| Best Resolution: |
Fluke 88 V: 0.001 mA |
| | AC Current |
| Maximum Amps: |
10A |
| Amps Accuracy: |
Fluke 88 V: ±(1.2%+2) |
| Best Resolution: |
0.001 mA |
| | Resistance |
| Maximum Resistance: |
50 MΩ |
| Accuracy: |
Fluke 88 V: ±(0.4%+1) |
| Best Resolution: |
0.1Ω |
| | Capacitance |
| Maximum Capacitance: |
9,999 µF |
| Accuracy: |
±(1%+2) |
| Best Resolution: |
0.01 nF |
| | Frequency |
| Maximum Frequency: |
200 KHz |
| Accuracy: |
±(0.005%+1) |
| Best Resolution: |
0.01 Hz |
| | Duty Cycle |
| Maximum Duty Cycle: |
99.9 % |
| Accuracy: |
within 2% per KHz +0.1% |
| Best Resolution: |
0.1 % |
| | Temperature Measurement |
|
-200.0°C - 1090°C |
|
-328.0°F - 1994.0°F, 1.0% excluding probe |
| | 80 BK Temperature Probe |
|
-40 °C - 260 °C |
|
-40 °F - 500 °F, 2.2 °C or 2% whichever is greater |
| | Conductance |
| Maximum Conductance: |
60.00 nS |
| Accuracy: |
±(1.0%+10) |
| Maximum Resolution: |
0.01 nS |
| | Operating Range |
| Operating Temperature: |
-20 °C - 55 °C |
| Storage Temperature: |
-40 °C - 60 °C |
| | Physical |
|
5.2 cm x 9.8cm x 20.1 cm (2.06” x 3.86” x 7.93”) |
|
624 g (22 oz.) |
| | Included Accessories |
| 88V/A AUTOMOTIVE KIT; |
88V, TL224 silicone test leads, AC285 long reach alligator clips, TP220 test probes, RPM 80 inductive RPM pick-up, magnet and strap, 80BK temperature probe, two automotive backprobe pins, insulation piercing probe, C800 durable carrying case, holster, 9V battery (installed), Getting Started Manual, and CD with detailed manual. |
|
|
| |