|
|
Be ready for anything.
With true-rms ac voltage and current measurements, the Fluke 375 Clamp Meter can read up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.
Safety Conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV
|
Fluke 375 True-rms AC/DC Clamp Meter
5
5
3
3
Everything that I need.
In my work I need to be able to do a wide range of testing, and the 375 handles everything that I need brilliantly. AC and DC current and capacitance measure means Im covered for almost any eventuality!
December 19, 2012
fluke 375
great meter love that has A/C and D/C good for solar combiner boxes
July 11, 2012
Great All Around Meter
It does everything I need a meter to do. Voltage, AC & DC current, resistance, capacitance, frequency, and it is accurate and tough. Unlike most other meters, I have never had a problem reading motor voltage from an AC drive with a Fluke.
I have tried to save by buying other "almost a Fluke" meters and it was money wasted. Spend the little extra for a Fluke. It is worth it. With it's CAT III & IV ratings, this meter will be everthing you need in most indutrial environments.
June 7, 2012
|
 |
Features and benefits
|
- iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
- CAT IV 600 V, CAT III 1000 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
- 500 mV dc measurement range to interface with other accessories
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft carrying case
|
|
Safety conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV
|
What’s the difference between the clamp meter models?
| |
Fluke-365 |
Fluke-373 |
Fluke-374 |
Fluke-375 |
Fluke-376 |
Fluke-381 |
| Measure ac current |
200.0 A |
600.0 A |
600.0 A |
600.0 A |
999.9 A |
999.9 A |
| Measure ac current via iFlex |
|
|
2500 A |
2500 A |
2500 A |
2500 A |
| Measure ac voltage |
600.0 V |
600.0 V |
600.0 V |
600.0 V |
1000.0 V |
1000.0 V |
| Measure continuity |
≤ 30 Ω |
≤ 30 Ω |
≤ 30 Ω |
≤ 30 Ω |
≤ 30 Ω |
≤ 30 Ω |
| Measure dc current |
200.0 A |
|
600.0 A |
600.0 A |
999.9 A |
999.9 A |
| Measure dc voltage |
600.0 V |
|
600.0 V |
600.0 V |
1000.0 V |
1000.0 V |
| Measure resistance |
6,000 Ω |
6,000 Ω |
6,000 Ω |
60k Ω |
60k Ω |
60k Ω |
| Measure frequency |
|
|
|
500 Hz |
500 Hz |
500 Hz |
| Measure inrush |
|
|
100 mS |
100 mS |
100 mS |
100 mS |
| Work in poorly lit areas |
Backlight |
Backlight |
Backlight |
Backlight |
Backlight |
Backlight |
| Measure non-linear loads |
True-rms |
True-rms |
True-rms |
True-rms |
True-rms |
True-rms |
|
| Specifications |
| Diameter of measurable conductor |
1.3 or 34 mm max |
| Operating temperature |
-14 to 122ºF (-10 to 50ºC) |
| Storage Temperature |
-40 to 140ºF (-40 to 60ºC) |
| Operating Humidity |
< 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC |
| Operating Altitude |
0 to 3000 m |
| Size |
246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.) |
| Weight |
388g, (14 oz.) |
| Temperature Coefficient |
0.01% ºC
(<18ºC or > 28ºC) |
| Warranty |
Three years for electronics
One year for cable and clamp assembly |
|
|
|
|