The most trusted tools in the world
Home  |  Products  |  Accessories  |  Test Leads, Probes and Clips  |  

TL175 TwistGuard™ Test Leads

Twist. Test.

The Fluke TL175 TwistGuard™ Test Leads with adjustable length test tips. Test leads as tough as your meter.
TL175 TwistGuard™ Test Leads – Twist.  Test.
Buy TL175 TwistGuard™ Test Leads – Twist.  Test.
TL175 TwistGuard Test Leads
TL175 TwistGuard Test Leads
TL175E TwistGuard Test Leads with 4mm tip
Reduce probe tip to decrease electrical short possibilities
TL175 test leads for high energy applications
The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. Fluke TL175s are the only test leads as tough as your meter.
  • TwistGuard™ adjustable tips enhance safety and versatility length
  • WearGuard™ indicator shows damage to leads
  • Heavy duty strain relief withstands over 30,000 bends
TL175 TwistGuard™ Test Leads 4 5 2 2
Accessories I like the test leads but my alligator clips (AC285) doesn't work on them. The video for these leads show a nice set of alligator clips that screw on them but I can't find them on this site. March 11, 2013
Great tips, sharp points, retractable insulating sheath The retractable sheaths are very nice for avoiding accidental contact with exposed metal. The retraction feature allows clipping on alligator jaws. The retracted and extended positions both have positive detents. There is no risk that the sheaths will accidentally change position. The one drawback is that the meter side connections have very long strain reliefs. These can ride up on the meter's protective boot and lift the probe connection from the meter. Either shorter strain reliefs or longer connector barrels would fix this problem. September 30, 2012
1-2 of 2
  • Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
  • New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
  • Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.
  • Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.
  • Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
  • Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
  • TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip
  • Probes always show correct category rating for tip being used
  • Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)
  • Conforms to EN61010-031
  • One-year warranty
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Exposed probe tip length: 19 mm to 4 mm (0.75 inch to 0.16 inch)
Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)

TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip.
Conforms to EN61010-031
Model NameDescriptionBuy it
TL175ETL175E TwistGuard™ Test Leads with 4 mm lantern tips 
TL175TL175 TwistGuard™ Test Leads
        
Related Products

 Write the first review
 
 TP175 TwistGuard™ Test Probes »
You need Flash player 8+ and JavaScript enabled to view this video.
Learn More »
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2013 Fluke Corporation