|
|
|
- Connects optical output of a Fluke test tool to a widely used parallel printer interface
- The PAC91 converter has an optical RS-232 (serial) input and a parallel data (Centronics) output
|
|
- Easy connection: Optical connector hooks directly to Fluke test tools with an optical interface
- Standard, 25-pin connector for Centronics printer cable
- Battery-powered for field use
- Auto Power-off mode helps conserve batteries
- "Busy" and "Power" indicator LED's
- 9600 baud communication speed keeps up with fast printers
|
|
| General Specifications |
| Optical Input |
|
Optical RS-232, 9600 baud, 8 bits, no parity, 1 stop bit, Xon/Xoff handshake.
|
| | Output |
|
Centronics (TTL levels,), 8 bit parallel with handshake. DB-25 female connector. |
| | Battery |
|
Alkaline 9V, IEC 6LR61 (NEDA 1604). Battery lifetime >20 hrs. at room temperature. |
| | Power switch setting |
|
Off / Auto off / On. 'Auto off' mode gives auto power-down 5 minutes after last data transfer. |
| | Dimensions |
|
123 x 76 x 30 mm (4.85 x 3 x 1.2 inch); cable length: 30 cm (1 ft).
|
| | Environmental |
|
Temperature range 0°C to +50°C (operating), -40°C to +70°C (storage).
|
| | Warranty | | | Supported instruments |
|
ScopeMeter test tools, power harmonics analyzers and graphical multimeters. |
|
|
| Model Name | Description | Buy it | | PAC91 | PAC 91 Printer Adapter Cable |  |  |
|
|
|
|