|
|
|
New Fluke 810 Vibration Tester: When you need an answer now... Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing.
The new Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands.
You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let alone be proactive about mechanical maintenance. The Fluke 810 Vibration Tester puts you one step ahead by using a simple step-by-step process to report on machine faults the first time measurements are taken, without prior measurement history. The combination of diagnoses, severity and repair recommendations help you make informed maintenance decisions and address critical problems first
|
Fluke 810 Handheld Vibration Tester
4
5
1
1
great meter for properties that prefer preventive maintenance over reactive maintenance
I have used this on a few different high rise buildings on equipment ranging from very old and neglected (50 years or more) to relativly new variable frequency driven pumps and fans. The results were very impressive and accurate. I have come across bearing loosness faults that were confirmed when the motor was taken apart, and fan imbalance faults on 2 different severity levels and both were confirmed when balanced(even to the amount)
I would consider this a must have for new buildings with lots of bearing eating vfd's with motors that don't have isolators. Seems to be common from the last 3 buildings I have worked at including a city water plant.
The machine is very easy to set up and use and after a few machines I was confident with what I was doing and when I did have a question, fluke was quick to get back with an answer
I gave it a 4 out of 5 star rating only because I wish it had more options on the software, is does have a place to insert a thermal image pdf. But other than that I can not edit the layout. I would like to be able to attach other preventive maintenance info to the same file such as lubrication schedules, belt changes and other important info.
May 15, 2013
|
Features and benefits
- On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on root cause, reducing unplanned downtime
- Fault severity scale with four severity levels helps you prioritize maintenance work
- Repair recommendations advise technicians on corrective action
- On-board context sensitive help provides real-time tips and guidance to new users
- 2 GB expandable on-board memory provides enough space for your machinery’s data
- Self-test function ensures optimal performance and more time on the job
- Laser tachometer for accurate machine running speed promotes confident diagnoses
- Tri-axial accelerometer reduces measurement time by 2/3 over single axis accelerometers
- Viewer PC Software expands data storage and tracking capacity
|
Use the Fluke 810 Vibration Tester to:
- Troubleshoot problem equipment and understand the root cause of failure
- Survey equipment before and after planned maintenance and confirm the repair
- Commission new equipment and ensure proper installation
- Provide quantifiable proof of equipment condition and drive investment in repair or replacement
- Prioritize and plan repair activities and operate more efficiently
- Anticipate equipment failures before they happen and take control of spare parts inventories
- Train new or less-experienced technicians and build confidence and skill across the team
|
The new Fluke 810 helps you locate and diagnose common mechanical problems and prioritize repair actions in three simple steps:
Vibration testing has never been easier.
The 810 asks for basic machine information you already know. Its onboard Info Feature gives you field tips for setting up and taking measurements like a pro.
Fluke 810 fits easily into your maintenance routine.
Use it to quickly troubleshoot problems or monitor machine conditions.
No more guessing your machine’s condition.
With the press of a button, the Fluke 810 identifies the root cause, its location, and how severe it is. Fix it right the first time.
|
|
| Diagnostic specifications |
| Standard faults |
|
Unbalance, looseness, misalignment and bearing failures | |
| Analysis for |
|
Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles | |
| Machine rotational speed range |
|
| Diagnosis details |
|
Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra | |
| Electrical specifications |
| Ranging |
|
| A/D converter |
|
| Usable bandwidth |
|
| Sampling |
|
| Digital signal processing functions |
|
Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging | |
| Sampling rate |
|
| Dynamic range |
|
| Signal to noise ratio |
|
| FFT resolution |
|
| Spectral windows |
|
| Frequency units |
|
| Amplitude units |
|
in/sec, mm/sec, VdB (US), VdB* (Europe) | |
| Non-volatile memory |
|
SD micro memory card, 2 GB internal + user accessible slot for additional storage | |
| General specifications |
| Dimensions (HxDxW) |
|
18.56 cm x 7.00 cm x 26.72 cm (7.30 in x 2.76 in x 10.52 in) | |
| Weight (with battery) |
|
| Display |
|
¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight | |
| Input/Output Connections |
|
Triaxial sensor connection 4 pin M12 connector
Single axis sensor connection BNC connector
Tachometer Connection Mini DIN 6 pin connector
PC Connection Mini ‘B’ USB (2.0) connector | |
| Battery |
|
Battery type Lithium-ion, 14.8 V, 2.55 Ah
Battery charging time Three hours
Battery discharge time Eight hours (under normal conditions) | |
| AC adapter |
|
Input voltage 100 Vac to 240 Vac
Input frequency 50/60 Hz | |
| Operating system |
|
| Language Support |
|
English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish | |
| Warranty |
|
| Environmental Specifications |
| Operating temperature |
|
0 °C to 50 °C (32 °F to 122 °F) | |
| Storage temperature |
|
-20 °C to 60 °C (-4 °F to 140 °F) | |
| Operating humidity |
|
10 % to 95 % RH (non-condensing) | |
| Agency approvals |
|
CHINA RoHS, CSA, CE, C TICK, WEEE | |
| Electromagnetic compatibility |
|
EN 61326-1:2006, EN 61010:1:2001 2nd ed. | |
| Sensor specifications |
| Sensor type |
|
| Sensitivity |
|
| Acceleration range |
|
| Amplitude nonlinearity |
|
| Frequency response |
|
Z: 2 - 7,000 Hz ± 3dB
X, Y: 2 - 5,000 Hz ± 3dB | |
| Power requirement (IEPE) |
| 18 V dc to 30 V dc, 2 mA to 10 mA | |
| Bias output voltage |
|
| Grounding |
|
| Sensing element design |
|
| Case material |
|
| Mounting |
| 10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength) | |
| Output connector |
|
| Mating connector |
|
| Non-volatile memory |
|
| Vibration limit |
|
| Shock limit |
|
| Electromagnetic sensitivity, equivalent g |
|
| Sealing |
|
| Temperature range |
| -50 °C to 120 °C (-58 °F to 248 °F) ± 7 % | |
| Warranty |
|
| Tachometer specifications |
| Dimensions (DxW) |
|
2.86 cm x 12.19 cm (1.125 in x 4.80 in) | |
| Weight |
|
| Power |
|
Powered by 810 Vibration Tester | |
| Detection |
|
| Range |
|
| Accuracy |
|
6.0 to 5999.9 rpm: ± 0.01 % and ± 1 digit
5999.9 to 99999 rpm: ± 0.05 % and ± 1 digit | |
| Resolution |
|
| Effective range |
|
1 cm to 100 cm (0.4 in to 39.27 in) | |
| Response time |
|
| Controls |
|
Measure on/off transparent button | |
| Interface |
|
| Cable length |
|
| Warranty |
|
| Tachometer accessories |
|
Reflective tape: 1.5 cm x 52.5 cm (0.59 in × 20.67 in) | |
| Viewer PC Software |
| Minimum hardware requirements |
|
| Operating system requirements |
|
|
| Model Name | Description | Price List | Buy it | | FLUKE-810 |
Vibration Tester
Includes:
- Vibration Tester with diagnostic technology
- Tri-axial accelerometer, magnet mount, mounting pad kit with adhesive, accelerometer quick-disconnect cable
- Laser tachometer and storage pouch
- Smart battery pack with cable and adapters
- Shoulder strap and adjustable hand strap
- Viewer PC software
- Mini USB to USB cable
- Getting Started Guide, illustrated quick reference guide, Users Manual CD-ROM,
- Carrying case
|
|  | |
| CarePlans | Buy it | | G3P-Group2 |
- GOLD CarePlan.
- Models covered: 50 Series II (51 II, 52 II, 53 II, 54 II), 190 Series II (190-062/AM, 190-062/AM/S, 190-102/AM, 190-102/AM/S, 190-104/AM, 190-104/AM/S, 190-202/AM, 190-202/AM/S, 190-204/AM, 190-204/AM/S, 190-502/AM, 190-502/AM/S), 381, 705, 707, 709, 709H, 712, 714, 715, 717, 718, 719, 754, 787, 789, 810, 1550C, 1577, and 1587.
- Extends warranty from three to five years and includes five annual NIST traceable calibrations with data.
| |  | | S3P-Group2 |
- SILVER CarePlan.
- Models covered: 50 Series II (51 II, 52 II, 53 II, 54 II), 190 Series II (190-062/AM, 190-062/AM/S, 190-102/AM, 190-102/AM/S, 190-104/AM, 190-104/AM/S, 190-202/AM, 190-202/AM/S, 190-204/AM, 190-204/AM/S, 190-502/AM, 190-502/AM/S), 381, 705, 707, 709, 709H, 712, 714, 715, 717, 718, 719, 754, 787, 789, 810, 1550C, 1577, and 1587.
- Extends warranty from three to five years.
| | |
| Batteries, Chargers and Adapters | Buy it | | SBP810 | Smart Battery Pack | | |
| Cases and Holsters | Buy it | | C1600 | C1600 Gear Box for Meter and Accessories
| | |
|
|
|
|
|
|
|
|