|
|
|
Two powerful tools in one
The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.
Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.
|
Fluke 1587/1577 Insulation Multimeters
5
5
3
3
One of hte Best Multi Meters Yet
I've been using this Meter for almost 2yrs now, from just checking voltage all the way to checking insulation in motors. I would recommend this meter to any Industrial Electrician.
October 19, 2012
simple and easy
Everything on this meter is simple and easy to use. Big and bright display. I'm an automotive technican and I use this meter for everything. Fluke meters by far in my opinion are the best.
June 7, 2012
tool mgr
i have a fluke 16 multimeter and have been using for over 11 years now, i think they are the best on the market. this one has never failed and that in itself is a selling point to me.as far as i'm concerned fluke brands are all i buy. thank you for a great product.
June 7, 2012
|
 |
Consult the features included on the two new insulation multimeters in the comparison chart below to help select the best tool for your application: |
| Feature |
1587 |
1577 |
| Insulation test voltages 50V, 100V, 250V, 500V, 1000V |
• |
|
| Insulation test voltages 500V, 1000V |
|
• |
| Insulation test: 0.01 MΩ to 2.0 GΩ |
• |
|
| Insulation test: 0.1 MΩ to 600 MΩ |
|
• |
| Auto discharge of capacitive voltage |
• |
• |
| Insulation test smoothing reading |
• |
|
| Frequency |
• |
|
| Capacitance |
• |
|
| Diode test |
• |
|
| Temperature |
• |
|
| Min/Max |
• |
|
| Low pass filter (for work on VSD's) |
• |
|
| AC/DC Voltage |
• |
• |
| DC millivolts |
• |
• |
| AC/DC milliamps |
• |
• |
| Resistance (0.1 Ω to 50 MΩ) |
• |
• |
| Continuity |
• |
• |
| Three-year warranty |
• |
• |
| Remote probe, test leads, alligator clips |
• |
• |
| K-type thermocouple |
• |
|
| Rugged, utility hard case |
• |
• |
| Auto power off to save battery power |
• |
• |
| True-rms |
• |
• |
| Large display with backlight |
• |
• |
| Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection |
• |
• |
| CAT III 1000V, CAT IV 600V measurement category |
• |
• |
| Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work |
• |
• |
|
|
|
| Specifications |
| Voltage DC |
| Maximum Voltage: |
1000 V |
| Accuracy: |
1577: ±(0.2%+2) |
|
1587: ±(0.09%+2) |
| Maximum Resolution: |
0.001V |
| | Voltage AC |
| Maximum Voltage: |
1000 V |
| Accuracy: |
1577: ±(2%+3) |
|
1587: ±(2%+3) |
| AC Bandwidth: |
1587: 5kHz* |
|
*with low pass filter; 3db @ 800 Hz |
| Maximum Resolution: |
0.1 mV |
| | Current DC |
| Maximum Amps: |
400mA |
| Amps Accuracy: |
1577: ±(1.0%+2) |
|
1587: ±(0.2%+2) |
| Maximum Resolution: |
0.01 mA |
| | Current AC |
| Maximum Amps: |
400mA |
| Amps Accuracy: |
1577: ±(2.0%+2)* |
|
1587: ±(1.5%+2)* |
|
* 1kHz bandwidth |
| Maximum Resolution: |
0.01 mA |
| | Resistance |
| Maximum Resistance: |
50 MΩ |
| Accuracy: |
1577: ±(1.2%+2) |
|
1587: ±(0.9%+2) |
| Maximum Resolution: |
0.1Ω |
| | Capacitance(1587 only) |
| Maximum Capacitance: |
9,999 µF |
| Accuracy: |
±(1.2%+2) |
| Maximum Resolution: |
1 nF |
| | Frequency (1587 only) |
| Maximum Frequency: |
100 kHz |
| Accuracy: |
±(0.1%+1) |
| Maximum Resolution: |
0.01 Hz |
| | Temperature Measurement (1587 only) |
|
-40.0 °C to 537 °C |
|
-40.0 °F to 998 °F |
|
excluding probe |
| | Diode Test (1587 only) |
| Range: |
6 V |
| Resolution: |
1 mV |
| Accuracy: |
±(2 % + 1) |
|
| Insulation Test |
| Minimum Test Current @ 1kΩ/V: | | | Test Voltages: |
| 1577: |
500, 1000 V |
| 1587: |
50, 100, 250, 500, 1000 V |
| | Maximum Resistance per Test Voltage: |
| 50V: |
|
| 100V: |
|
| 250V: |
|
| 500V: |
|
| 1000V: |
1577: 600 MΩ |
|
1587: 2 GΩ |
| | Maximum Resolution per Test Voltage: |
| 50V: |
0.01 MΩ |
| 100V: |
0.01 MΩ |
| 250V: |
0.1 MΩ |
| 500V: |
0.1 MΩ |
| 1000V: |
0.1 MΩ |
| | Accuracy per Test Voltage: |
| 50V: |
±(3 % + 5) |
| 100V: |
±(3 % + 5) |
| 250V: |
±(1.5 % + 5) |
| 500V: |
1577: ±(2.0 % + 5) |
|
1587: ±(1.5 % + 5) |
| 1000V: |
1577: ±(2.0 % + 5) |
|
1587: ±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ |
|
| Environmental Specifications |
| Operating temperature | | | Storage temperature | | | Humidity (Without Condensation) |
|
0% - 95% (10 °C – 30 °C) |
|
0% - 75% (30 °C – 40 °C) |
|
0% - 40% (40 °C – 55 °C) |
| | Operating Altitude | |
| Safety Specifications |
| Overvoltage category |
|
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V |
| | Agency Approvals |
|
2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V |
|
| Mechanical & General Specifications |
| Size |
|
203 x 100 x 50 mm (with holster) |
| | Weight | | | Warranty | | | Battery life Alkaline |
| Meter use: |
1000 hours |
| Insulation test use: |
Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off. |
| | IP Rating | |
|
| Model Name | Description | Price List | Buy it | | Fluke 1587 |
Insulation Multimeter
Includes:
- Remote probe
- Test leads
- Alligator clips
- K-type thermocouple
- Hard case
- Four AA alkaline batteries
- Quick Reference Guide
- CD Rom with Manual
|
|  | | | Fluke 1577 |
Insulation Multimeter
Includes:
- Remote probe
- Test leads
- Alligator clips
- Hard case
- Four AA alkaline batteries
- Quick Reference Guide
- CD Rom with Manual
|
| | |
| CarePlans | Buy it | | G3P-Group2 |
- GOLD CarePlan.
- Models covered: 50 Series II (51 II, 52 II, 53 II, 54 II), 190 Series II (190-062/AM, 190-062/AM/S, 190-102/AM, 190-102/AM/S, 190-104/AM, 190-104/AM/S, 190-202/AM, 190-202/AM/S, 190-204/AM, 190-204/AM/S, 190-502/AM, 190-502/AM/S), 381, 705, 707, 709, 709H, 712, 714, 715, 717, 718, 719, 754, 787, 789, 810, 1550C, 1577, and 1587.
- Extends warranty from three to five years and includes five annual NIST traceable calibrations with data.
| |  | | S3P-Group2 |
- SILVER CarePlan.
- Models covered: 50 Series II (51 II, 52 II, 53 II, 54 II), 190 Series II (190-062/AM, 190-062/AM/S, 190-102/AM, 190-102/AM/S, 190-104/AM, 190-104/AM/S, 190-202/AM, 190-202/AM/S, 190-204/AM, 190-204/AM/S, 190-502/AM, 190-502/AM/S), 381, 705, 707, 709, 709H, 712, 714, 715, 717, 718, 719, 754, 787, 789, 810, 1550C, 1577, and 1587.
- Extends warranty from three to five years.
| | |
| Clips | Buy it | | AC285 | AC285 SureGrip™ Alligator Clips | | | | TLK225 | TLK-225 SureGrip™ Master Accessory Set | | |
| Test Probes | Buy it | | TP220 | TP220 SureGrip™ Industrial Test Probes | | |
| Cases and Holsters | Buy it | | C101 | C101 Hard Case | | | | C25 | Large Soft Case for DMMs | | | | C550 | C550 Tool Bag | | | | CXT170 | CXT170 Extreme Case | | | | Fluke MeterCleaner Wipes | Fluke MeterCleaner Wipes | | | | TPAK | ToolPak™ | | |
| Current Clamps | Buy it | | i1010 Kit | i1010-KIT AC/DC Current Clamp and Carry Case Kit | | | | i200 | i200 AC Current Clamp | | | | i400 | i400 AC Current Clamp | | |
| Lights | Buy it | | L200 | L200 Probe Light | | | | L210 | L210 Probe Light Kit | | | | LVD1 | LVD1 Volt Light | | |
| Temperature | Buy it | | 80AK-A | 80AK-A Thermocouple Adapter | | | | 80PK-27 | 80PK-27 SureGrip™ Industrial Surface Temperature Probe | | | | 80PK-3A | 80PK-3A Surface Probe | | | | 80PK-8 | 80PK-8 Pipe Clamp Temperature Probe | | |
| Test Leads | Buy it | | TL225 | TL225 SureGrip™ Stray Voltage Adapter Test Lead Kit | | | | TL27 | TL27 Heavy Duty Test Lead Set | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |