The most trusted tools in the world
Home  |  Products  |  Electrical Testers  |  Electrical Testers  |  

Fluke 9040 Phase Rotation Indicator

 Fluke 9040
Phase rotation indicator with high voltage capability for industrial applications

The Fluke 9040 is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. The Fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an LCD display and the phase rotation direction to determine correct connections. It allows rapid determination of phase sequence and has a voltage (up to 700 V) and frequency range suitable for commercial and industrial applications. The included test probes have a variable clamping range for safe contact, also in industrial sockets.

Fluke 9040 Phase Rotation Indicator 5 5 2 2
No nonsense phase rotatiion tester This tester does its job and does it well. No battery to worry about, two sets of probes and gives accurate readings. What more could you ask for? All my tester/meters are fluke. June 8, 2012
Clear, simple and effective. This tester does exactly what it sets out to do. Tests phase rotation with minimum fuss. It comes with both probes and clips to allow testing on types of installations. The meter itself is solid as to be expected from Fluke and the display is clear and easy to read and gives an instant indication to the direction of rotation. It also tests up to 400hz making it ideal for aircraft power installations where correct phase rotation is paramount due to the sensitive electronics and high cost of aircraft electrical systems. If I were to be picky, the only thing I can fault with this meter is the lack of a backlit display but this isn't really much if an issue at all. I recommend this meter 100%. May 21, 2012
1-2 of 2

9040

  • 3 phase indication
  • Indication of phase rotation
  • Clear LCD display
  • No battery required

Technical Specifications
Voltage range
 40-700 V
Frequency range
 15-400 Hz
Operating timer
 Continuous

Environmental Specifications
Operating temperature
 0 °C to 40 °C
Dust/water resistance
 IP 40

Safety Specifications
Electrical Safety
 EN 61010,
 EN 61557-7
Overvoltage category
 CAT III, 600 V
 CAT IV, 300V

Mechanical & General Specifications
Size
 124 x 61 x 27 mm
Weight
 200 g
Power supply
 From unit under test
Warranty
 2 years
Model NameDescriptionBuy it
Fluke 9040 Phase Rotation Indicator
  • 3 self-retaining test probes (black)
  • alligator clip
  • user manual
 

Test ProbesBuy it
TLK290TLK290 Flexible Socket Probe Set
TLK291TLK291 Fused test probe set
Electrical Testers | Voltage Detector | Continuity Tester | Volt Alert
        
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2013 Fluke Corporation