|
|
The NEW standard for rugged
The Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.
|
Rugged Multimeters: Fluke 27 II/28 II Industrial Multimeters
5
5
3
3
GREAT METER
Have had the Fluke 28II for over a 2 years. What a Great Meter. Had a problem from the start when you tried to use the beeper in the continuity mode, the battery would be displayed on screen. Saying the battery was low. Other that the meter worked great. Just sent in they fixed that problem and calibrated the meter. What a GREAT PRODUCT AND COMPANY. Thank you Fluke
January 20, 2013
I love this meter with all of the specs
I love this meter with all of the specs and very tough i had seen reveiws on the meter i have had now for just over a month and relised it has a fault, the meter tells me the batterys are flat when there not as it will not let me use the back light or beep. Ok so this happens the bad point is fluke wont get back to my boss about replacment not repair as it was faulty from day one "life time warranty" WELL ?
September 12, 2012
KLUTZ!
I was thinking of buying an 87V but decided to try the mil-spec "heavy duty" version of the 87V; the FLUKE 28||. Mind you this was only the second VOM meter I ever purchased & the most expensive thus far, so I was afraid of even getting it dirty. While performing maintenance on a commercial building I had an incident. I didn't have it for a week before the klutz in me took over & the meter did a peter-pan out of my grasp, bounced off the roof access ladder & in my horror I watched helplessly as my FLUKE 28|| plummeted in slow motion thirty feet before smacking into solid concrete. After finding no exterior damage I turned it on & to my astonishment it worked! The only thing I can find wrong with it is the loud beeper is silent, I have the T5-600 if I really need to make some continuity noise. I know I should have the meter properly calibrated to make sure it's still accurate but I tested it on some known electrical effects & it's accurate enough for me right now. as for the beeper... I don't miss it. If it was any other meter besides the FLUKE 28||, I assure you it would've involved a broom & dustpan!
August 9, 2012
|
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 μF capacitance range
- Frequency to 200 kHz
- Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Peak min-max (28 II)
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II)
|
Features:
- New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
- Designed to withstand 3 meter drop (with holster)
- Hi resolution 20,000 count display mode (28 II)
- True-rms ac voltage and current for accurate measurements on non linear signals (28 II)
- Average responding voltage and current for measurements (27 II)
- New – Backlit keypad buttons allow for easy visibility in lowlit areas
- Large display digits and 2 level bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- MSHA approval
|
|
| Accuracy specifications |
| DC voltage |
| Range |
0.1 mV to 1000 V |
| Accuracy |
27-II:0.1 % +1
28-II:0.05 % + 1 |
|
| AC voltage |
| Range |
0.1 mV to 1000 V |
| Accuracy |
27-II: 0.5 % +3
28-II: 0.7 % +4 |
|
| DC current |
| Range |
0.1 μA to 10 A |
| Accuracy |
27-II: 0.2 % + 4
28-II: 0.2 % + 4 |
|
| AC current |
| Range |
0.1 μA to 10 A |
| Accuracy |
27-II: 1.5 % + 2
28-II: 1.0 % + 2 |
|
| Resistance |
|
| Display counts |
| 27-II |
6000 |
| 28-II |
6000/19,999 |
|
| Capacitance |
|
| Frequency |
|
| Temperature |
|
27-II: N/A
28-II: -200 °C to +1090 °C |
|
| Low pass filter (Measurement on VSD’s) |
|
| Compliance |
|
CAT IV 600 V , CAT III 1000V |
|
| IP rating |
| 27-II: |
IP 67 |
| 28-II: |
IP 67 |
|
| Power |
|
| Battery life |
|
| General specifications |
| Display |
| Bar graph/backlight |
Yes/Yes |
|
| Data storage |
| Peak transient capture |
250 μS (28 II) |
| Min/Max/Avg |
Yes |
| Reading hold |
Yes |
|
| Other features |
| Relative readings (zero) |
Yes |
| Battery type |
Three AA batteries |
|
| Warranty and protection |
| Safety rating |
CAT IV 600 V/CAT III 1000 V |
| Mine Safety |
MSHA Approved |
| External protection |
Rubber holster |
| Drop test |
10 feet drop test |
| Dustproof/waterproof |
Yes, IP 67 rated |
| Warranty |
Limited lifetime |
| Size (HxWxL) with holster |
6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in) |
| Weight with holster |
698.5 g (1.54 lb) |
|
|
| Model Name | Description | Price List | Buy it | | FLUKE 27-II | Industrial Multimeter
|  | | | FLUKE 28-II | Industrial Multimeter
| | |
| CarePlans | Buy it | | G1P-Group6 |
- GOLD CarePlan.
- Models covered: 27II, 77-4, 88-5, 175, 177, 179, and 233.
- Adds "lifetime" NIST traceable factory calibration with data (Seven full calibrations).
| |  | | G3P-Group6 |
- GOLD CarePlan.
- Models covered: 287, 289, 28II, 83-5.
- Adds "lifetime" NIST traceable factory calibration with data (Seven full calibrations).
| | |
| Clips | Buy it | | AC285 | AC285 SureGrip™ Alligator Clips | | | | TLK225 | TLK-225 SureGrip™ Master Accessory Set | | |
| Cases and Holsters | Buy it | | C100 | C100 Universal Carrying Case | | | | C101 | C101 Hard Case | | | | C125 | C125 Meter Case
| | | | C550 | C550 Tool Bag | | | | CXT80 | CXT80 Extreme Case | | |
|
|
|
|
|
|
| | |