Keeping your world up and running.
Home  |  Products  |  Clamp Meters  |  

Fluke 902 FC True-rms HVAC Clamp Meter

Document measurements, email results, and collaborate with colleagues in real time directly from the job site.

Fluke 902 FC HVAC Clamp Meter transmits data wirelessly to your phone
Fluke 902 FC HVAC Clamp Meter transmits data wirelessly to your phone
Troubleshoot and repair HVAC systems with the Fluke 902 FC
Read measurements on your phone at a safe distance with the Fluke 902 FC
Fluke 902 FC HVAC Clamp Meter with inclusions

Fluke 902 FC True-rms HVAC Clamp Meter enables HVAC technicians to create reports and collaborate with peers from the work site.

The Fluke 902 FC True-rms HVAC Clamp Meter, a wireless Fluke Connect®-enabled meter, improves the productivity of HVAC technicians in the field. The rugged dual rated - CAT III, 600 /CAT IV, 300 V - meter performs the essential measurements of HVAC systems — microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature — eliminating the need to carry multiple tools. Its small body is easy to hold and the jaw fits perfectly in tight work spaces.

As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. Those measurements can be uploaded to the cloud. Technicians can combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues with ShareLive™ video calls or email, increasing productivity in the field.

The clamp meter also decreases the frequency that technicians will need to wear personal protective equipment when working on high voltage/current panels. Simply turn off the panel, verify the panel is de-energized using standard safety procedures, place the clamp and sync it to a smartphone with the Fluke Connect app, close the panel, reenergize it, and take measurements from a safe distance.

Applications for HVAC

  • 200 µA DC current measurements to measure flame rod
  • Extended resistance range to measure thermistors up to 60kΩ
  • Capture flue gas temperature
  • Measure start and run motor capacitors
  • Measure performance of variable frequency drives

Fluke Connect

  • Fluke Connect connects your meter to your phone through Bluetooth to help you get more done faster and safer
  • Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
  • Troubleshoot better by instantly trending and monitoring measurements live on your phone screen
  • Create and email reports right from the field. Report not enough? Fluke Connect has ShareLive video calls that stream live video and measurements in the same screen
  • Don't stop to write down results, save them directly from your meter to your phone with the press of a button

Measurement capability

  • 600 A ac current measurement
  • 600 V ac and dc voltage measurement
  • Temperature measurement from -10 °C to 400 °C (14 °F to 752 °F)
  • 1000 µF capacitance measurement
  • DC Current measurement to 200 µA
  • True-rms voltage and current for accurate measurements on non-linear signals
  • Resistance measurement to 60 kΩ
  • Min and max recording to capture variations automatically

Other features

  • CAT III 600V, CAT IV 300V safety rating
  • TPAK magnetic strap (optional) allows you to conveniently hang the meter while using the probes
  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy-to-read backlit display
  • Three-year warranty
  • Soft carrying case
Function
A ac (via Jaw)
Resolution 0.1 A
Accuracy 2.0% ±5 digit (45-65 Hz)
2.5% ±5 digit (65-400 Hz)
Range 60.00/600.0 A
Crest Factor (50Hz or 60Hz) 2.5 MIN@220 A
3.0 MIN@180 A
> 1.4 MIN@600 A
Add 2% for CF>400 A
V ac
Resolution 0.1 V
Accuracy 1.5% ±5 digits
Range 600.0 V
V dc
Resolution 0.1 V
Accuracy 1.5% ±5 digits
Range 600.0 V
Ohms
Resolution 0.1/1/10
Accuracy 1% ±5 digits
Range 600/6000/60.00 kΩ
Capacitance
Resolution 0.1/1 µF
Accuracy 1% ±4 digits
Range 100.0/1000 µF
µA
Resolution 0.1 µA
Accuracy 1% ±5 digits
Range 200 µA
Contact temperature
Resolution 0.1 C/F
Accuracy 1% ±8 digits
Range -10 to 400 °C (14 °F to 752 °F)
Continuity beeper
Beeper volume 75 dBA nom. 15 cm. from case front
On threshold <=30 Ω
Mechanical and General Specifications
Maximum voltage between any terminal and earth ground 1000 V
Battery type 2 AA alkaline batteries, NEDA 15A, IEC LR6
Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Operating humidity Non condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F))
Altitude Operating: 3,000 m (9,842 ft)
Storage: 12,000 m (39,370 ft)
Dimensions 230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in)
Weight (meter only) 419 g (15 oz)
Safety IEC 61010-1, Pollution Degree 2
IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V
IP Rating IEC 60529: IP30, non-operating
Radio Frequency Certification FCC ID:T68-FBLE IC:6627A-FBLE
Electromagnetic Compatibility (EMC) International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Temperature coefficients Add 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C
Model NameDescriptionPrice List
FLK-902 FC

902 FC HVAC Clamp Meter
Includes:

  • TL75 test leads (1 pair)
  • 80BK integrated DMM temperature probe (1)
  • AA alkaline batteries (2)
  • Soft carrying case
  • User's manual
  • Statement of calibration
Price List

ClipsPrice List
AC220AC220 SureGrip™ Alligator Clip SetPrice List
AC285AC285 SureGrip™ Alligator Clip SetPrice List
AC87AC87 Heavy Duty Bus Bar Clip SetPrice List
AC89AC89 Heavy Duty Insulation Piercing Test ClipPrice List

Test ProbesPrice List
TP1TP1 Slim Reach Test Probe (flat blade)Price List

Cases and HolstersPrice List
C1600C1600 Gear Box for Meter and Accessories Price List
C33C33 Soft Carrying CasePrice List
C550C550 Tool BagPrice List
Fluke MeterCleaner WipesFluke MeterCleaner WipesPrice List
TPAK

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

  • 9 inch hook and loop strap
  • Universal hanger clip
  • Hook hanger for non magnetic surfaces
  • Strong magnet
Price List
H3H3 Holster (330 Series)Price List

LightsPrice List
L206L206 Deluxe LED Hat LightPrice List
LVD1LVD1 Volt LightPrice List

TemperaturePrice List
80AK-A80AK-A Thermocouple AdapterPrice List
80PK-880PK-8 Pipe Clamp Temperature ProbePrice List

Test LeadsPrice List
TL223TL223 Electrical Test Lead SetPrice List
TL224TL224 SureGrip™ Insulated Test LeadsPrice List
TL71TL71 Premium Test Lead SetPrice List
TL75TL75 Hard Point™ Test Lead SetPrice List

Fluke Connect® SmartView® desktop software is available in all countries but Fluke Connect system is not. Check with your local Fluke distributor.

All trademarks are the property of their respective owners. Smart phone, wireless service and data plan not included with purchase. First 5 GB of storage is free. Compatible with iPhone 4s and up running iOS 8 or higher, iPad (in an iPhone frame on iPad) and Galaxy S4, Nexus 5, HTC One running Android™ 4.4.x or higher. Apple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

Home   |   Site Map   |   Fluke Corporation   |   Safety Notices
Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale   |   Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation