Keeping your world up and running.
Home  |  Products  |  Thermal Cameras and Gas Detectors  |  
This product is discontinued or reclassifiedFluke suggests:
Fluke TiX560 Infrared Camera

Fluke Ti40FT and Ti45FT IR FlexCam® Thermal Imagers with IR-Fusion® Technology

See how to increase the safety and speed of electrical thermography with IR Windows.
View a short video »
 Fluke Ti40 Series
The versatile choice for maintenance and production engineers and technicians

The Fluke Ti4x models feature everything needed for virtually every thermography task. With a 160 x 120 detector and a temperature sensitivity down to 0.08°C (80mK) (NETD) they deliver high resolution images where even the smallest temperature differences can be seen. The units are extremely easy to use through the Windows® CE menu structure and offer an extended troubleshooting feature set to allow on the spot analysis in the field.

The FT models feature the innovative IR-Fusion® technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the side navigation of this page.

Typical applications:

  • Predictive maintenance – Identify electrical and mechanical problems before they cause failure
  • Industrial maintenance – Check whether repairs have been performed successfully
  • Quality control – Examine prototypes and refine thermal management designs
  • Process monitoring – Real-time observation to ensure efficient and safe operation

Fluke IR-Fusion Technology
Infrared and Visible light images are fused together - enabling you to view images in a range of modes from full IR to full visible light, and see exactly what you are viewing.
To find out more select "IR-Fusion" in the side navigation of this page.

See exactly what you are viewing
Fluke IR-Fusion® technology links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.

Large, sharp thermal images
Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.

A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.

Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.

Analysis and reporting comes standard
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the side navigation of this page.

Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.

Ti45FT Ti40FT
High resolution, low noise VOx detector for high quality images 160 x 120
Temperature range to cover broad industrial applications -20 to + 600 ° C (-4 to 1112 °F)
High temperature option 1200 ºC (2192 ºF)
High thermal sensitivity for viewing even the smallest temperature differences ≤0.08 ºC (80 mK) ≤0.09 ºC (90 MK)
180º articulating flexible lens to view images in every situation
Choice of 3 interchangeable lenses to cover every application
Large 5" high contrast color LCD for a clear picture independent of lighting conditions
Fully radiometric for detailed temperature analysis and tracking
SmartFocus for best image quality and accurate temperature measurements
Windows® CE based menu structure for ease of use
Personalized instrument set-up for multiple use
CompactFlash memory cards to store over 1000 IR images plus fully radiometric temperature data
SmartView reporting and analysis software included
AutoCapture for making intermittent problems visible
On-board analysis functions
User defined text annotations for simplified reporting
Built-in visible light (digital) camera
IR/Visible Alarm function


Laser pointer for easy targeting
Flash and torch light for high quality images in dark environments

Keep your Thermal Imager at optimal performance!
Check to see if you have the latest software or firmware version.

Imaging performance
Field of view (FOV)*  20 mm lens 23 ° x 17 ° FOV
10.5 mm lens 42 ° x 32 °
54 mm lens 9° x 6°
Spatial resolution (IFOV)*  2.60 mrad
Min focus distance*  0.15 m
Thermal sensitivity (NETD)  Ti45: ≤0.08 °C(80 mK) at 30 °C
Ti40: ≤0.09 °C (90 mK) at 30 °C
Detector data acquisition / Image frequency*  30 Hz/60 Hz
Focus  SmartFocus; one finger continuous focus
IR digital zoom  Ti45: 2x

 Ti40: -
Detector type  160 x 120 Focal Plane Array, Vanadium Oxide (VOx) Uncooled Microbolometer
Spectral band  8 µm to 14 µm
Digital image enhancement  Automatic full-time enhanced
On-camera operating modes  Ti45: Full thermal, full visual light or merged thermal-visual images. Picture-in-Picture

 Ti40: Full thermal or full visual light. Merge thermal-visual images in SmartView software. Picture-in-Picture
Visible light camera  1280 x 1024 pixels, full color
Visible light digital zoom  Ti45: 2x

 Ti40: -
Temperature measurement
Calibrated temperature range  Ti45: -20 ˚C to 600 ˚C (-4 to 1112 ºF) in 3 ranges
Ti40: -20 ˚C to 350 ˚C (-4 to 662 ºF) in 2 ranges
Range 1  Ti45: -20 ˚C to 100 ˚C (-4 to 212 ºF)

 Ti40: -20 ˚C to 100 ˚C (-4 to 212 ºF)
Range 2  Ti45: -20 ˚C to 350 ˚C (-4 to 662 ºF)

 Ti40: -20 ˚C to 350 ˚C (-4 to 662 ºF)
Range 3  Ti45: 250 ˚C to 600 ˚C (482 to 1112 ºF)

 Ti40: -
Optional - High temperature  Ti45: Up to 1200 ˚C (2192 ºF)
Ti40: -
Range 4  Ti45: 500 ˚C to 1200 ˚C (932 to 2192 ºF)

 Ti40: -
Accuracy  ±2°C or 2 % (whichever is greater)
Measurement modes  Ti45: Centerpoint, center box (area min/max, average), moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below

 Ti40: Centerpoint, center box (area min/max, average)
Emissivity correction  0.1 to 1.0 (0.01 increments)
Image presentation
Digital display  5" large high-resolution digital display
LCD backlight  Sunlight readable color LCD
Video output  RS170 EIA/NTSC or CCIR/PAL composite video
Palettes  Grayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted
Optional lenses (only available at time of original purchase)
54 mm Telephoto lens  High precision Germanium lens
Field of view (FOV)  9º horizontal x 6º vertical
Spatial resolution (IFOV)  0.94 mrad
Min focus distance  0.6 m
10.5 mm wide angle lens  High precision Germanium lens
Field of view (FOV)  42 º horizontal x 32 º vertical
Spatial resolution (IFOV)  4.9 mrad
Min focus distance  0.3 m
Image and data storage
Storage medium  Compact flash card stores over 1000 IR images (1 GB card standard)
File formats supported  14 bit measurement data included. Exportable JPEG, BMP, PNG, GIF, TIFF.
Interfaces and software
Interface  Compact flash card reader included
Software  SmartView; Full analysis and reporting software included
Classification  Class II
Laser targeting  Laser dot visible on screen when blending thermal and visible image
Controls and adjustments
Set-up controls  Date/time, temperature units C/F, language, scale, LCD intensity (high/normal/low)
Image controls  Level, span, auto adjust (continuous/manual)
On-screen indicators  Battery status, target emissivity, background temperature and real time clock
Power, battery life
Battery type  Li-Ion smart battery, rechargeable, field-replaceable
Battery operating time  3 hours continuous operation (2 hours with IR-Fusion engaged)
Battery charging  2 bay intelligent charger powered via AC outlet
AC operation  AC adapter 110/220 VAC, 50/60 Hz (Ti45 only)
Power saving  Automatic shutdown and sleep modes (user specified)
Environmental and mechanical design
Operating temperature  -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature  -40 °C to +70 °C (-40 °F to 158 °F)
Relative humidity  Operating and storage 10% to 95%, non-condensing
Water and dust resistant  IP54
Weight (including batteries)  1.95 kg (4.3 lbs)
Camera size (HxWxD)  162 x 262 x 101 mm (6.5" x 10.5" x 4.0")
Warranty  2 years

7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information.

Keep your Thermal Imager at optimal performance!
Check to see if you have the latest software or firmware version.

Model NameDescriptionPrice List
Fluke Ti40FT-20 IR FlexCam Thermal Imager with IR-Fusion

All models include:

  • Heavy duty carrying case
  • 2 rechargeable battery packs
  • Battery charger
  • AC adapter (for Ti45 model only)
  • Video cable
  • 512 MB compact flash card
  • Compact flash card reader and USB cable
  • Neck strap
  • SmartView reporting and analysis software on CD
  • User manual on CD
  • Calibration certificate
Price List
Fluke Ti45FT-20IR FlexCam Thermal Imager with IR-Fusion Price List
7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information.

Available Options
Use the Product Selector Tool in the "Knowledge and Information" tab to view the entire range of possiblities.
Lens 10.5mm, 20mm, and 54mm lenses are available within the Ti4X series. Use the Configurator to view the possible combinations.
High temperature Some models in the Ti4X series can include the high temperature option allowing readings up to 1200 °C (2192 °F).

Home   |   Site Map   |   Fluke Corporation   |   Safety Notices
Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale   |   Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation