Keep your world up and running.
Home  |  Terms and Conditions of Sale

Fluke Terms and Conditions of Sale (International)

These terms and conditions comprise the general terms and conditions under which Fluke Europe B.V. and its Affiliates outside North and South America supply goods and related warranty services.

In these terms and conditions:

“Affiliate” means, in respect of any person, any entity that directly or indirectly through one or more intermediaries Controls or is Controlled by such person or is under direct or indirect common Control with such person.
“Control” means, in respect of an entity, the ability (whether it is legally enforceable or not) to control, whether directly or indirectly, whether through the ownership of voting securities, by contract or otherwise, the composition of the board of directors (or other governing body) of that entity, the voting rights of the majority of voting securities of the entity, or the management of the affairs of that entity.
“Buyer” means the legal or natural person who has raised a purchase order or has otherwise requested the supply of goods from Fluke.
“Fluke” means the Fluke group legal entity which has accepted Buyer’s purchase order or has otherwise agreed to deliver goods to Buyer.
“Fluke Service Centre” means Fluke’s premises or the premises of a third party, which Fluke has authorized to provide warranty services for the Fluke goods.

THESE TERMS CONTROL

These terms and conditions shall govern the supply by Fluke of goods and related warranty services, unless Buyer and Fluke have agreed in writing for other terms and conditions to apply to such supply. Terms or provisions of Buyer's order that are inconsistent with or in addition to these terms and conditions shall not be binding unless accepted in writing by Fluke. Fluke's failure to object to any provision contained in a communication from Buyer shall not be a waiver of these terms and conditions. If any of these terms or conditions are declared by an arbitrator, or court or other body having jurisdiction, to be invalid or unenforceable, the remaining terms and conditions shall remain in full force and effect.

DELIVERY

The delivery term(s) agreed between Buyer and Fluke for the provision of Fluke’s goods shall appear on Fluke’s confirmation of order. Unless otherwise indicated therein, the latest edition of the Incoterms issued by the International Chamber of Commerce apply to the delivery term(s) mentioned therein.

The risk of loss or damage to the goods shall pass to the Buyer at the place where delivery takes place, in accordance with the agreed delivery term(s). Fluke shall retain title to all goods delivered to the Buyer until Fluke has received payment in full of the purchase price of the goods.

The dates indicated for dispatch to Buyer by Fluke are estimated and not binding; they have to be calculated from the date of Fluke’s written confirmation of the order or, where a letter of credit has been asked for, from the date of the advising bank's advice to Fluke that it has been opened in conformity with Fluke’s requirements. Fluke reserves the right to dispatch the goods in consignments as and when they are ready for dispatch.

COMPLAINTS AND RETURNS

Any complaints of erroneously delivered goods and/or goods apparently damaged when delivered shall be made in writing within fourteen days after receipt of the goods by the Buyer and if return of the goods is agreed upon they shall be forwarded in accordance with Fluke’s instructions and preceded by an advice note, giving the reason for return and the date and number of Fluke’s invoice. All goods returned must be consigned insurance and carriage prepaid and packed in their original packing.

PAYMENT

The payment term agreed between Buyer and Fluke for the provision of Fluke’s goods shall appear on Fluke’s confirmation of order and in the invoice and is subject to the following conditions:
(a) Letter of Credit. Payment shall be made by a confirmed, irrevocable L/C issued in favour of Fluke by a first class bank which has adopted the Uniform Customs and Practice for Documentary Credits issued by the International Chamber of Commerce.
(b) Prepayment. Payment must include estimated shipping and transportation charges shown in the quotation. Overpayment of such charges will be refunded.
(c) Open Account. Payment shall be made within the period indicated on the confirmation of order and in the invoice, which if nothing else is indicated therein, shall be counted from the date of issue of the invoice, for 100% of the invoiced amount.

TESTS

Goods manufactured/supplied by Fluke are carefully inspected and, where practicable, submitted to Fluke’s standard tests before dispatch. If special tests or tests in the presence of the Buyer or its representative are required, these must be specified by the Buyer when giving the order and shall, unless otherwise agreed, be made before dispatch; all costs connected with such tests will be charged extra. In the event of any delay on the part of the Buyer in attending such tests after fourteen days' notice that the goods are ready to be tested, the tests will proceed in the Buyer's absence and shall be deemed to have been made in its presence.

INSTALLATION

Unless expressly agreed otherwise, the cost of installation of any goods supplied by Fluke is not included in any quotation.

CANCELLATION

Orders may not be canceled or rescheduled without Fluke's written consent and are subject to cancellation or reschedule charges determined by Fluke.

EXPORT REGULATIONS

The sale of Fluke’s products and technology is subject to compliance with national, E.U. and U.S. export control laws and regulations. Where applicable, orders are contingent upon the grant of export licences or other clearances required by the relevant government. Buyer shall not export, re-export or transfer, directly or indirectly, any Fluke products or technology to any country or user to which such export, re-export or transfer is restricted by U.S. or other country law or regulation without first obtaining any required government license, authorization, certification or approval. The use, sale, re-export, delivery or retransfer, directly or indirectly, of Fluke’s products and technology in any activities related to the design, production, use, or stockpiling of chemical, biological or nuclear weapons or missiles is strictly prohibited. Buyer agrees to comply with any end user and/or end use statements given or representations made to Fluke in relation to the supply of goods and/or warranty services by Fluke. Any Fluke products sold in violation of export control laws or regulations cannot be serviced or supported by Fluke. Warranty for any such products is therefore void.

EXCUSABLE DELAYS

Fluke shall not be liable for non-delivery or delay in performance when such delay is directly or indirectly caused by, or in any manner arises from, delay or failure to deliver by Fluke's suppliers, fires, floods, accidents, riots, war, governmental interference or embargoes, strikes or shortage of labor, or other causes (whether or not similar to those specified) beyond its control. Delivery shall be deemed suspended so long as such causes delay performance. Fluke agrees to make, and Buyer will accept, deliveries at a reasonable time after remedy of such causes.

DESIGN CHANGES

Fluke and its suppliers reserve the right to change product design or specifications at any time without notice.

SOFTWARE

Software will be delivered subject to the terms and conditions of any end user license agreement provided with or for such software. In cases where software is provided without such end user license agreement, Fluke Corporation grants a perpetual, non-exclusive license to Buyer to use ordered software on a single unit of product. Title to software shall remain in Fluke Corporation or its suppliers. This license may be terminated if Buyer discloses the software to others without Fluke Corporation's consent. Back-up copies of the software may be made and Buyer may sublicense the software along with the transfer of said single unit of product.

WARRANTY

Fluke warrants to the Buyer that each Fluke hardware product will be free from defects in material and workmanship under normal use and service. The warranty period is controlled by the documents furnished with each product and begins on the date of shipment of the product by Fluke. Spare parts are warranted for 90 days. This warranty does not apply to fuses, disposable batteries or to any product which, in Fluke's opinion, has been misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling or has been repaired, maintained or otherwise serviced by anyone other than a Fluke Service Centre. Fluke warrants to the Buyer that Fluke’s software will operate substantially in accordance with its functional specifications for 90 days from the date of shipment (if delivered on physical media) or the date on which Fluke has provided access to it (if delivered by way of issue of license keys or by electronic means) and that, where the software is delivered on physical media, it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product returned within the applicable warranty period and, unless otherwise advised by Fluke, is only available in the country of purchase of the product from Fluke. Fluke reserves the right to invoice Buyer for the costs of importation, re-export, labor and replacement parts when a product purchased in one country is submitted for repair in another country. The European Union will be considered as one country for the purposes of this provision.

To obtain warranty service, the nearest Fluke Service Center in the country of purchase of the product from Fluke must be contacted. Unless advised by the Fluke Service Center that the product can be collected, the Buyer must ship the product (with a description of the difficulty and reference to the return authorization number, issued by the Fluke Service Center) to the Fluke Service Center, carriage, insurance and all other costs prepaid by the Buyer. Fluke assumes no risk for damage or loss of the product in transit. If Fluke determines that the damage, defect or failure was caused by misuse, alteration, accident or abnormal condition of operation or handling, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair or replacement the product will be returned to the Buyer on the same delivery terms as those that applied to the original purchase of the product.

This warranty is Buyer's sole and exclusive remedy and is in lieu of all other warranties, express or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

LIABILITY

To the maximum extent allowed by applicable law: (a) Fluke shall not be liable for any indirect damages or losses, including loss of data, whether arising from breach of warranty or based on contract, tort (including negligence), reliance or any other theory of law; and (b) Fluke’s liability for direct damages or losses, whether arising from breach of warranty or based on contract, tort (including negligence), reliance or any other theory of law shall be limited to the value of the goods and/or warranty services delivered pursuant to the Buyer’s order.

ASSIGNMENT

No rights or obligations relating to an order are assignable without Fluke's prior written approval.

LEGAL CONSTRUCTION

These terms and conditions and the contract to which they apply shall be construed in accordance with the laws of the country where Fluke is incorporated.

Rev. 25 Sep. 2017

        
Home  |   Site Map  |   Fluke Corporation  |  安全通知
隠私權聲明  |  使用條款   |  條款與條件  |  Terms and Conditions of Service
© 1995 - 2017 Fluke Corporation