繁体中文

Fluke 700HTH Hydraulic Test Hose

主要功能

  • Hose and fittings connect directly to the Fluke 700HTP-1 test pressure port
  • Includes plugs and caps to eliminate fluid loss in hose, eliminates the need to re-prime the hose
  • Self-sealing fittings with easy finger tight connections
  • Low volumetric expansion and a negligible pressure drop at rated pressures

產品概述: Fluke 700HTH Hydraulic Test Hose

Fluke 700HTH Hydraulic Test Hose

Description:The Fluke 700HTH hydraulic test hose is a 10,000 psi, 700 bar working pressure test hose that features stainless steel and nylon construction. The hose uses self-sealing fittings with easy finger tight connections. The hose has very low volumetric expansion and a negligible pressure drop at rated pressures.

Application:The Fluke 700HTH allows connection to a calibration unit under test from a Fluke 700HTP hydraulic test pump in use with the Fluke 700 series pressure modules. The 700HTH is compatible with water and non-corrosive oil.

Included:

  • Hose and fittings to connect directly to the Fluke 700HTP test pressure port
  • Output connection is 1/4" NPT female with adapters (2) to convert to 1/4" and 1/8" NPT male
  • Instruction sheet
Material:Nylon, stainless steel, brass, PFTE, nitrile

Dimensions:Length 1 meter, bore 0.3" / 3.2 mm, outer diameter 0.27" / 6.9 mm

Weight:2.2 lbs. / 1.0 kg

Warranty:One year

規格: Fluke 700HTH Hydraulic Test Hose

General Specifications
MaterialNylon, stainless steel, brass, PFTE, nitrile
DimensionsLength 1 meter, bore 0.3" / 3.2 mm, outer diameter 0.27" / 6.9 mm
Weight2.2 lbs. / 1.0 kg
WarrantyOne year

機型: Fluke 700HTH Hydraulic Test Hose

Fluke 700HTH
Fluke 700HTH Hydraulic Test Hose
購買
  • Hose and fittings to connect directly to the Fluke 700HTP test pressure port
  • Output connection is 1/4" NPT female with adapters (2) to convert to 1/4" and 1/8" NPT male
  • Instruction sheet