English

FoodPro Plus IR Thermometer

Model#: Fluke FP Plus Part#: 2477950 UPC#: 0 95969 29870 4
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.23ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • FoodPro Plus IR Thermometer - 1
  • Fluke FoodPro Infrared Food Thermometer
  • Fluke FoodPro Infrared Food Thermometer

Key features

  • Two-in-one infrared thermometer for foodservice
  • Combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings
  • Features an integrated countdown timer with alarm that monitors line checks as well as cooking and cooling intervals
  • Provides a built-in fold-out probe for measuring internal food temperatures

Product overview: FoodPro Plus IR Thermometer

Fluke FoodPro Plus food safety thermometer measures both internal and surface temperatures with one handy tool

The Fluke FoodPro Plus thermometer provides a complete temperature measurement and monitoring solution for foodservice professionals. Use the FoodPro Plus to quickly and accurately measure food product temperatures to help detect potential food safety problems. It combines the same infrared surface temperature scanner as the FoodPro, and adds to it a fold out probe thermometer for measuring internal food temperature, and an integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals. Like the FoodPro, the FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.

The Fluke FoodPro Plus is useful for:

  • Receiving: Use the FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
  • Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures
  • Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements
  • Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs
  • Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste
  • Measures -35 to +275 °C (-31 to 527 °F) with non-contact thermometer and from -40 to 200ºC (-40 °F to +392 °F)with probe
  • Features backlit display for clear readings in poorly lit areas
  • Displays MAX temperature for quick reference

Specifications: FoodPro Plus IR Thermometer

Infrared Specifications
Temperature-35°C to 275°C
Accuracy(Assumes ambient operating temperature of 23°C ±2°)
Between 0°C and 65°C: ±1°C
Below 0°C: ±1° ±0.1 degree/degree
Above 65°C: ±1.5% of reading
Response time< 500 ms after initial reading
Spectral response8-14 microns
EmissivityPre-set for foodservice applications
Distance to spot size/Optical resolution (D:S)2.5:1 @ 90% energy, typical
Typical working range (target illumination)≈ 25 mm to 250 mm
Minimum target size12 mm ø
Illumination to IR channel offset13 mm
Probe Specifications
Temperature-40°C to 150°C
Accuracy(Assumes ambient operating temperature of 23°C ±2°)
Between –5°C and 65°C: ±0.5°C
Below –5°C: ±1°C
Above 65°C: ±1% of reading
Response time7-8 seconds (3 time constants)
Probe dimensionsDiameter: 3.0 mm
Length: 90 mm
Sensor typeThin-film platinum, class A, Resistance
Thermal device (RTD)
Operational Specifications
RepeatabilityWithin accuracy specifications of the unit
Ambient operating range0°C to 50°C
Relative humidity90% (±5%) RH non condensing @ 30°C
Storage temperature-20°C to 60°C
Weight150 g (with battery)
Dimensions165 x 32 x 50 mm
Power, battery life9 V alkaline
Battery lifeAlkaline, 10 hours minimum @ 23°C
Target illuminationHigh brightness LED
Display resolution4 digits, 0.1°C
Displayhold (7seconds)Yes
LCD backlit displayYes
Temperature display4 digits, 0.1°C resolution
Maximum temperature displayedYes
TimerYes
Environmental dataIP54 sealing (hand-washable, non-submersible)
Other Specifications (both)
Calibration certificateCalibration accuracy with NIST and DKD traceability
StandardsConforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
CertificationsCE NSF
Warranty2 years
Options/AccessoriesReplacement probe
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice.

Models: FoodPro Plus IR Thermometer

Fluke FP Plus
Fluke FoodPro Plus Infrared Food Thermometer
Part#: 2477950
UPC#: 0 95969 29870 4

Includes:

  • Built-in contact probe
  • 9 V alkaline battery
  • Quick start guide
  • Operator's guide
  • Soft carry pouch

A Field Replacement Probe (see below) is available as an optional accessory.

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 25.08ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 24.28ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.
Welcome to Fluke's Chat GPT Assistant. As with other generative AI systems, this chatbot may occasionally generate incorrect information. For questions regarding the safe use of Fluke tools, please refer to your owners manual. You must comply with your employer’s safety standards and obtain necessary training before using Fluke tools or taking electrical measurements. To speak with a person, visit our Contact Us page.
How can I help you today?