English

Fluke 1652C Multifunction Installation Tester

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 25.46ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke 1652C Multifunction Installation Tester
Discontinued

Key features

Safer, easier installation testing.

The 1652C Installation Tester verify the safety of electrical installations in domestic, commercial and industrial applications. It can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364, HD 384 and all relevant local standards.

Faster

  • Two measurements at once and a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel, saves you more than 50% of test time compared to other loop testers.
  • Additional new high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCD’s.
  • Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation.
  • Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections.

Safer

  • Earth Volt Touchpad detects raised earth voltages 50 V, indicating potential dangerous situations.
  • with the SureGrip™ test leads and clips which gives the user a comfortable, reliable grip.

Easy

  • Rotary dial knob indicates clear which function is selected, all functionalities on one spot and no complex multi level menus.
  • Large display with backlight, clear symbols and exceptionally wide viewing angle for easy and safe readings.
  • PASS/FAIL indication for RCD test results.
  • Variable RCD current mode for customized settings.
  • Extended documentation mode (UK only)

Rugged & lightweight Withstands a drop of 1 meter. Compact, lightweight (less than 1.3 kg) and padded neck-strap to free your hands for all day testing.

1650B Kit Complete kit
All 1650 models are equipped with detachable leads that can be replaced in case of damage or loss. A durable hard case will protect your instrument in tough field conditions.

Slim probe design with test button
Keeps your eyes on the panel while probing hard to reach points. This remote probe is powered by the tester so always operable (does not require additional batteries).

Zero Adapter

For easy, always reliable and accurate compensation of test leads and mains cords. This adapter can be used for all different kind of mains plugs as well as test accessories like probes, alligator clips etc.
This product is discontinued or reclassified

Product overview: Fluke 1652C Multifunction Installation Tester

Extra functionality, faster testing, and as rugged as ever

The 1652C Installation Tester builds upon the rugged reputation of the earlier 1650 Series, only it’s re-designed to meet your need for more productive test tools.

This installation tester offers the following new capabilities:

  • Fast high current loop test
  • Variable RCD current mode for customized settings
  • PASS/FAIL indication for RCD tests
  • Select voltage measurement between L-N, L-PE and N-PE
  • Zero adapter for easy test lead compensation, available as new accessory and also included with standard scope of supply
  • Extended documentation mode (UK only)
Measurement functionsFluke 1652CFluke 1653BFluke 1654B
Voltage and frequency

Wiring polarity checker

Insulation resistance250 V, 500 V, 1000 V50 V, 100 V, 250 V,
500 V, 1000 V
50 V, 100 V, 250 V,
500 V, 1000 V
Continuity   
Loop and line resistance

Loop and line resistance-mΩ resolution  

PEFC/PSC (fault/short-circuit current)

RCD tripping time

RCD tripping current level

Ramp test

Automatic ROD test sequence

Test dc-sensitive RCDs (type A)

Test dc-sensitive RCDs (type B)  

Earth resistance 

Phase sequence indicator

Other features   
Self-test

EN 61557*/VDE 0413 compliant

Illuminated display

Live voltage indicator

Battery indicator and battery test function

Memory, interface   
Memory 

Extended memory  

Computer interface 

Time stamp (software enabled) 

Software (optional) 

Specifications: Fluke 1652C Multifunction Installation Tester

Specifications
AC voltage measurementRange500 V
Resolution0.1 V
Accuracy (50 - 60 Hz)±(0.8% + 3 digits)
Input impedance3.3 MΩ
Overload protection660 Vrms
Continuity testingRange (autoranging)20 Ω, 200 Ω, 2000 Ω
Resolution0.01 Ω, 0.1 Ω, 1 Ω
Test current> 200 mA
Open circuit voltage> 4 V
Accuracy±(1.5%+3 digits)
Insulation Resistance Measurement
Test voltageFluke 1652C250 - 500 - 1000 V
Fluke 1653B + 1654B50 - 100 - 250 - 500 - 1000 V
Test voltage (50 V)Test current1 mA @ 50 kΩ
Insulation range10 kΩ - 50 мΩ
Resolution0.01 мΩ
Accuracy±(3% + 3 digits)
Test voltage (100 V)Test current1 mA @ 100 kΩ
Range/Resolution20 MΩ/0.01 MΩ / 100 MΩ/0.1 MΩ 
Accuracy±(3% + 3 digits)
Test voltage ( 250 V)Test current1 mA @ 250 kΩ
Range/Resolution20 MΩ/0.01 MΩ /200 MΩ/0.1 MΩ 
Accuracy±(1.5% + 3 digits)
Test voltage (500 V)Test current1 mA @ 500 kΩ
Range/Resolution20 MΩ/0.01 MΩ
Range/Resolution200 MΩ/0.1 MΩ
Accuracy±(1.5% + 3 digits)
Range/Resolution500 MΩ/1 MΩ
Accuracy10%
Test voltage (1000 V)Test current1 mA @ 1 MΩ
Range/Resolution20 MΩ/0.01 MΩ
Range/Resolution200 MΩ/0.1 MΩ
Accuracy±(1.5% + 3 digits)
Range/Resolution500 MΩ/1 MΩ
Accuracy10%
Auto dischargeDischarge time constant, 0.5 second for C = 1 µF or less
Live circuit detectionInhibits test if terminal voltage > 30 V prior to initiation of test
Maximum capacitive loadOperable with the 5 µF load
Loop Impedance Measurement (High Current Mode and Non-Trip Mode)
 Range100 - 500 VAC (50/60 Hz)
Input connectionSoft Key selection
Loop impedancePhase to earth
Line impedancePhase to neutral
Limit on consecutive testsAutomatic thermal shutdown after 50 consecutive tests at 10 second intervals (typical)
  
Range/Resolution (High Current)20 Ω/0.001Ω (1mΩ) (Fluke 1654B)
Range/Resolution20 Ω/0.01 Ω
Range/Resolution200 Ω/0.1 Ω
Range/Resolution2000 Ω/1 Ω
  
Accuracy (no Trip mode)±(3% + 6 digits)
Accuracy (Hi Current mode)±(2% + 4 digits)
Accuracy (Hi Current mode 1mΩ)±(2% + 15 digits) (Fluke 1654B)
PFC, PSC TestComputationPFC or PSC determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance
Range0 - 25 kA
Resolution (Ik < 1000 A)1 A
Resolution (Ik >= 1000 A)0.1 kA
AccuracyDetermined by accuracy of loop resistance and mains voltage measurements.
RCD Testing ¹Fluke 1654BA, AC, B, B+, F, G/R, S
Fluke 1652CA, AC, F, G/R, S
Fluke 1653BA, AC, F, G/R, S
Tripping Time Test (ΔT)
Trip time accuracy ±(1% Reading + 1 digit)
Multiplier: x ½ Current Settings10, 30, 100, 300, 500, 1000 mA
Current Accuracy+0% - 10%
RCD Type ¹G
Measurement Range310 ms (Europe), 2000 ms (UK)
RCD Type ¹S
Measurement Range510 ms (Europe), 2000 ms (UK)
Multiplier: x 1Current Settings10, 30, 100, 300, 500, 1000 mA
Current Accuracy+10% - 0%
RCD Type ¹G
Measurement Range310 ms
RCD Type ¹S
Measurement Range510 ms
Multiplier: x 5Current Settings10, 30 mA
Current Accuracy±10%
RCD Type ¹G
Measurement Range50 ms
RCD Type ¹S
Measurement Range160 ms
Tripping Current (ramp)
Current range50% - 110% of RCD's rated current
Step Size10% of IΔN
Dwell time (Type G) ¹300 ms / step
Dwell time (Type S) ¹500 ms / step
Trip current measurement zccuracy±5%
Earth Resistance Test (RE) - Fluke 1653B + 1654B
Range/Resolution200 Ω/0.1 Ω
Accuracy±(2% + 5 digits)
Range/Resolution2000 Ω/1 Ω
Accuracy±(3.5% + 10 digits)
Frequency128 Hz
Compliance voltage+25 V
Phase Sequence Indication
IconIcon Phase Sequence indicator is active
Display of Phase SequenceDisplays '1-2-3' in digital display field for correct sequence
Displays '3-2-1' for incorrect phase
Dashes in place of a number indicate a valid determination could not be made
¹ RCD Types
GGeneral, no delay
STime delay
AResponds to pulsed signal
ACResponds to AC
1654B 
Environmental Specifications
Operating temperature-10 °C to 40 °C
Humidity (without condensation)10 to 30 °C95%
30 to 40 °C75%
Safety Specifications
Safety RatingEN 61010-I CAT III 500V, CAT IV 300V
Mechanical and General Specifications
Size (L x W x H)10 x 25 x 12.5 cm
Weight1.3 kg
BatteriesType AA: 6
Warranty3 years
Battery typeAlkaline supplied, usable with 1.2V NiCD or NiMH rechargeable batteries

Models: Fluke 1652C Multifunction Installation Tester

Fluke 1652C
Fluke 1652C Multifunction Installation Tester
  • 6 AA Cell batteries
  • C1600 Hard carrying case
  • Zero Adapter
  • Mains test cord
  • TL165X/STD Standard Test Lead Set
  • Padded carrying strap
  • Quick reference guide
  • TP165X Remote control probe and lead¹
  • Users manual on CD-ROM
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 94.73ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.98ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.