Singapore [Change Country]  |  Fluke [Change Company]
fluke
Home  |  Products  |  Clamp Meters  |  
Contact usRefer this page

Fluke 376 True-rms AC/DC Clamp Meter with iFlex™

Part clamp meter, part clamp marvel.

With the Fluke 376 Clamp Meter with iFlex, you’ll be ready for anything.

Contact Me
Request A Demo
Fluke 376
Fluke 376
Fluke 376
Fluke 376
Fluke 376
Be ready for anything.

The Fluke 376 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.

Additionally, the Fluke 376 includes the new iFlex™ flexible current probe, which expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward sized conductors and improved wire access. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

Safety Conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV

Features and benefits

  • iFlex flexible current probe expands the measurement range to 2500 A ac
  • CAT IV 600 V, CAT III 1000 V
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • Min, max, average and inrush recording to capture variations automatically
  • Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing protective equipment
  • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case

Safety conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV

What’s the difference between the clamp meter models?

  Fluke-365 Fluke-373 Fluke-374 Fluke-375 Fluke-376 Fluke-381
Measure ac current 200.0 A 600.0 A 600.0 A 600.0 A 999.9 A 999.9 A
Measure ac current via iFlex     2500 A 2500 A 2500 A 2500 A
Measure ac voltage 600.0 V 600.0 V 600.0 V 600.0 V 1000.0 V 1000.0 V
Measure continuity ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω ≤ 30 Ω
Measure dc current 200.0 A   600.0 A 600.0 A 999.9 A 999.9 A
Measure dc voltage 600.0 V   600.0 V 600.0 V 1000.0 V 1000.0 V
Measure resistance 6,000 Ω 6,000 Ω 6,000 Ω 60k Ω 60k Ω 60k Ω
Measure frequency       500 Hz 500 Hz 500 Hz
Measure inrush     100 mS 100 mS 100 mS 100 mS
Work in poorly lit areas Backlight Backlight Backlight Backlight Backlight Backlight
Measure non-linear loads True-rms True-rms True-rms True-rms True-rms True-rms
Specifications
Diameter of measurable conductor 01.3” or 34 mm max
Operating temperature -14 to 122ºF (-10 to 50ºC)
Storage Temperature -40 to 140ºF (-40 to 60ºC)
Operating Humidity < 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating Altitude 0 to 3000 m
Size 246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.)
Weight 388g, (14 oz.)
Temperature Coefficient 0.01% ºC
(<18ºC or > 28ºC)
Warranty Three years for electronics
One year for cable and clamp assembly
Model NameDescription
Fluke 376

True-rms AC/DC Clamp Meter with iFlex™

Included accessories:

  • 18-inch iFlex™ flexible current probe
  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • TL75 test leads
  • Two AA Alkaline batteries

Clips
AC220AC220 SureGrip™ Alligator Clips
AC87AC87 Heavy Duty Bus Bar Clip Set
AC89AC89 Heavy Duty Insulation Piercing Test Clip

Test Probes
TP1TP1 Slim Reach Test Probe Set

Cases and Holsters
C550C550 Tool Bag

Lights
L206L206 Deluxe LED Hat Light
LVD1LVD1 Volt Light

Test Leads
TL75TL75 Hard Point™ Test Lead Set
Search Fluke
ResourcesProducts
Find Resources
Related Products
 
 C43 Soft Carrying Case »
 
 i2500-10 iFlex® Flexible Current Probes »
 
 TLK289 - Industrial Master Test Lead Set »

       Home   |   Site Map   |   Fluke Corporation   |   Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale © 1995 - 2014 Fluke Corporation