Keep your world up and running.
Home  |  Products  |  Process Calibration Tools  |  Multifunction Calibrators  |  

Fluke 725 Multifunction Process Calibrator

Contact Me
Request A Demo
 Fluke 725
“Simply" Powerful!

Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.

Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.

From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.

The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.
  • Small, streamlined shape makes it easy to carry
  • Rugged, reliable design stands up to field use
  • Easy to read measure/source screen lets you view input and output simultaneously
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Source mA with simultaneous pressure measurement to conduct valve and I/P tests
  • Support flow meter testing with frequency and CPM functions
  • Perform fast linearity tests with auto- step and auto-ramp features
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms
  • Store frequently used test setups for later use
  • Backlight lets you work in poor light
  • Large battery capacity of four AA cells
  • Battery door for easy changes
Measurement Accuracy
Voltage DC
30.000 V  0.02%+ 2 counts (upper display)
30.000 V  0.02%+ 2 counts (lower display)
100.00 mV  0.02%+ 2 counts
-10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC
24.000 mA  0.02%+ 2 counts
0.0 to 400.0 Ω  0.1Ω (4-wire), 0.15Ω (2- and 3-wire)
401 to 1500 Ω  0.5Ω (4-wire), 1Ω (2- and 3-wire)
1500 to 3200 Ω  1Ω (4-wire), 1.5Ω (2- and 3-wire)
2.0 to 1000.0 CPM  0.05 % + 1 count
1.0 to 1100.0 Hz  0.05 % + 1 count
1.00 to 10.00 kHz  0.05 % + 1 count
Sensitivity  1 V peak-to-peak-minimum
Accuracy  from 0.025% of range using any of 29 pressure modules.
 (for detailed specifications refer to pressure modules in options and accessories)
 Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Source Accuracy
Voltage DC
100.00 mV  0.02%+2 counts
10.000 V  0.02%+2 counts
-10.00 mV to 75.00 mV  0.025 % + 1 count (via TC connector)
Current DC
24.000 mA (Source)  0.02%+ 2 counts
24.000 mA (Simulate)  0.02%+ 2 counts
15.0 to 400.0 Ω  0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA)
401 to 1500 Ω  0.5 Ω(excitation current 0.05 to 0.8 mA)
1500 to 3200 Ω  1 Ω(excitation current 0.05 to 0.4 mA)
2.0 to 1000.0 CPM  0.05%
1.0 to 1100.0 Hz  0.05%
1.00 to 10.00 kHz  0.25%
Waveform:  5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples
Measure Accuracy:
NI-120  0.2 °C
PT-100 (385)  0.33 °C
PT-100 (393)  0.3 °C
PT-100 (JIS)  0.3 °C
PT-200 (385)  0.2 °C
PT-500 (385)  0.3 °C
PT-1000 (385)  0.2 °C
Resolution:  0.1 °C
J:  0.7 °C
K:  0.8 °C
T:  0.8 °C
E:  0.7 °C
R:  1.8 °C
S:  1.5 °C
B:  1.4 °C
L:  0.7 °C
U:  0.75 °C
N:  0.9 °C
Resolution  J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F
XK  0.6°C
BP  1.2°C
Source Accuracy:
NI-120  0.2 °C
PT-100 (385)  0.33 °C
PT-100 (393)  0.3 °C
PT-100 (JIS)  0.3 °C
PT-200 (385)  0.2 °C
PT-500 (385)  0.3 °C
PT-1000 (385)  0.2 °C
Resolution:  0.1 °C
Note:  Accuracy stated for 4-wire measurement.
J:  0.7 °C
K:  0.8 °C
T:  0.8 °C
E:  0.7 °C
R:  1.4 °C
S:  1.5 °C
B:  1.4 °C
L:  0.7 °C
U:  0.75 °C
N:  0.9 °C
Resolution  J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C
XK  0.6°C
BP  1.2°C

Ramp Functions
Source functions:  Voltage, current, resistance, frequency, temperature
Ramps  Slow ramp, Fast ramp, 25% step-ramp
Loop Power Function
Voltage:  24 V
Accuracy:  10%
Maximum current:  22 mA, short circuit protected
Step Functions
Source functions:  Voltage, current, resistance, frequency, temperature
Steps  25% of range, 100% of range

Environmental Specifications
Operating Temperature
 -10 °C to +55 °C
Storage Temperature
 -20 °C to 71 °C
Operating Altitude
 3000 m

Safety Specifications
Agency Approvals
 EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical & General Specifications
 130 x 236 x 61 mm
 0.65 kg
 4 AA alkaline batteries
Battery Replacement
 Separate battery compartment, accessable without breaking calibration seal
Side port connections
 Pressure module connector, also used for remote real-time programming
Model NameDescription
Fluke 725 Multifunction Process Calibrator including:
  • One set of AC72 alligator clips
  • One set of stackable test leads
  • One set of TL 75 testleads
  • User manuals
  • NIST- traceable calibration report and data

AC220AC220 SureGrip™ Alligator Clips
AC280AC280 SureGrip™ Hook Clips
AC283AC283 SureGrip™ Pincer Clips
AC87AC87 Heavy Duty Bus Bar Clip Set

Differential Pressure Modules
700P00700P00 Differential Pressure Module
700P01700P01 Differential Pressure Module
700P02700P02 Differential Pressure Module
700P03700P03 Differential Pressure Module
700P04700P04 Differential Pressure Module

Pressure Calibrators
Fluke 750PSeries Pressure Modules

Pumps and Accessories
700PMP700 PMP Pressure Pump
700HTH-1Fluke 700HTH-1 Hydraulic Test Hose
700PRV-1Fluke 700PRV-1 Pressure Relief Valve Kit
700PTP-1Fluke 700PTP-1 Pneumatic Test Pump
700HTP-2Fluke 700HTP-2 Hydraulic Test Pump

Differential Pressure Module Wet
700P22700P22 Differential Pressure Module Wet
700P23700P23 Differential Pressure Module Wet
700P24700P24 Differential Pressure Module Wet

Absolute Pressure Modules
700PA3700PA3 Absolute Pressure Module
700PA4700PA4 Absolute Pressure Module
700PA5700PA5 Absolute Pressure Module
700PA6700PA6 Absolute Pressure Module
700PRV700PRV Pressure Relief Valve Kit

Cases and Holsters
C100C100 Universal Carrying Case
C120C120 Hard Carrying Case
C125C125 Meter Case
C510C510 Leather Meter Case
C550C550 Tool Bag
C75C75 Accessory Case
C781C781 Meter Case
CXT80CXT80 Extreme Case
C25C25 Large Soft Case for DMMs
CAMO-C25Camouflage Carrying Case

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

  • 9 inch hook and loop strap
  • Universal hanger clip
  • Hook hanger for non magnetic surfaces
  • Strong magnet

Dual Pressure Modules
700PD2700PD2 Dual Pressure Module
700PD3700PD3 Dual Pressure Module
700PD4700PD4 Dual Pressure Module
700PD5700PD5 Dual Pressure Module
700PD6700PD6 Dual Pressure Module

Vacuum Pressure Modules
700PV3700PV3 Vacuum Pressure Module
700PV4700PV4 Vacuum Pressure Module

700TC2700TC2 Thermocouple Plug Kit 700TC2
80CJ-M80CJ-M type J Male Mini-Connectors
80CK-M80CK-M type K Male Mini-Connectors
80PJ-180PJ-1 Bead Probe
80PJ-EXT80PJ-EXT Extension Wire Kit
80PK-180PK-1 Bead Probe
80PK-2480PK-24 SureGrip Air Temperature Probe
80PK-2580PK-25 SureGrip™ Piercing Temperature Probe
80PK-2680PK-26 SureGrip™ Tapered Temperature Probe
80PK-980PK-9 General Purpose Probe
80PK-EXT80PK-EXT Extension Wire Kit
80PT-2580PT-25 SureGrip Piercing Temperature Probe
80PT-EXT80PT-EXT Extension Wire Kit
80PK-2280PK-22 SureGrip™ Immersion Temperature Probe
80PK-2780PK-27 SureGrip™ Industrial Surface Temperature Probe
80PK-3A80PK-3A Surface Probe
80PK-880PK-8 Pipe Clamp Temperature Probe

Test Leads

SureGrip™ Industrial Test Lead Set includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Industrial Test Probe Set
  • TL224 SureGrip™ Silicone Test Lead Set (straight to right)
  • One year warranty
TL71TL71 Premium Test Lead Set
TL910TL910 Electronic Test Probe Set
TL940TL940 Mini-Hook Test Lead Set
TL950TL950 Mini-Pincer Test Lead Set
Home  |   Site Map  |   Fluke Corporation  |  Safety Notices
Privacy Statement  |  Terms of Use   |  Terms and Conditions of Sale  |  Terms and Conditions of Service
© 1995 - 2017 Fluke Corporation