Keep your world up and running.
Home  |  Products  |  Digital Multimeters  |  

Fluke 80 Series V Digital Multimeters: The Industrial Standard

  • The most trusted industrial multimeter in the business
  • Designed and built in the U.S.A.
  • Lifetime warranty

Measure variable speed drives accurately
Fluke 80 Series V 87V 83V 87V/E2 Kit
Fluke 80 Series V 87V 83V 87V/E2 Kit
Fluke 80 Series V 87V 83V 87V/E2 Kit
Fluke 80 Series V 87V 83V 87V/E2 Kit

From the control room to the plant floor, the Fluke 80 Series family of digital multimeters has earned its reputation as the digital multimeter industrial technicians trust. When productivity is on the line, the Fluke 80 Series delivers the accuracy and advanced troubleshooting capabilities you need to solve problems fast.

Use its low pass filter function to measure voltage and frequency accurately on electrically “noisy equipment like adjustable speed motor drives. Use the peak capture function to detect intermittent problems and transients as fast as 250 micro seconds (µs).

And work with confidence. The Input Alert function gives you an audible warning against wrong use of input jacks. Fluke 80 Series multimeters are independently tested for use in CAT IV 600V/CAT III 1000V environments. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

At Fluke, our ideas come straight from the job site. We work with users like you to create test tools that do the job you want for as long as you need it—and give you full value. We design and build Fluke 80 Series multimeters in the U.S.A. The 80 series is backed by our limited lifetime warranty. And we back them with our limited lifetime warranty so you can work smarter, faster and safer.

The Fluke 80 Series consists of the following models:

87VNew features for maximum productivity
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 80- Series V significantly easier to read than older models

True-rms ac voltage and current for accurate measurements on non linear signals 
Selectable filter for accurate voltage and frequency measurements on motor drives 
0.05 % dc accuracy 
6000 counts, 3-3/4 digits
4-1/2 digit mode for precise measurements (20,000 counts) 
Measure up to 1000 V ac and dc
Measure up to 10 A, 20 A for up to 30 seconds
Built in thermometer lets you carry one less tool (TC probe included) 
Frequency to 200 kHz and % duty cycle
Resistance, continuity and diode test
10,000 µF capacitance range for components and motor caps
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead interference from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch Hold to capture stable readings avoiding noisy signals
Large display digits and two-level bright white backlight for increased visibility
Analog bargraph for fast changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Improved selectable sleep mode for long battery life
Access door for fast battery changes without breaking the calibration seal
"Classic" design with new removable holster with built in test lead and probe storage
Lifetime warranty

Electrical safety
All inputs are protected to the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.


Correctly measure pulse-width modulated motor drive signals
Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the new Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals
  • Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
  • Measure AC current with an optional current clamp accessory
  • Compare reading from the 87V with the display on the ASD
  • Special shielding blocks high frequency, high-energy noise generated by large drive systems

Complex PWM drive signals are not a problem for the Fluke 87V
Pulse-width modulated detail of 50 Hz motor drive output voltage. 1000 V, 50 micro-second pulses can cause erratic behavior in some test equipment.
Voltage DC
Maximum Voltage:  1000V
Accuracy:  Fluke 83 V: ±(0.1%+1)
 Fluke 87 V: ±(0.05%+1)
Maximum Resolution:  Fluke 83 V: 100 µV
 Fluke 87 V: 10 µV
Voltage AC
Maximum Voltage:  1000V
Accuracy:  Fluke 83 V: ±(0.5%+2)
 Fluke 87 V: ±(0.7%+2) True RMS
AC Bandwidth  Fluke 83 V: 5kHz
 Fluke 87 V: 20kHz*
 *with low pass filter; 3db @ 1kHz
Maximum Resolution:  0.1 mV
Current DC
Maximum Amps:  10A (20 A for 30 seconds maximum)
Amps Accuracy:  Fluke 83 V: ±(0.4%+2)
 Fluke 87 V: ±(0.2%+2)
Maximum Resolution:  Fluke 83 V: 0.01 mA
 Fluke 87 V: 0.01 µA
Current AC
Maximum Amps:  10A (20 A for 30 seconds maximum)
Amps Accuracy:  Fluke 83 V: ±(1.2%+2)
 Fluke 87 V: ±(1.0%+2) True RMS
Maximum Resolution:  0.1 µA
Maximum Resistance:  50 MΩ
Accuracy:  Fluke 83 V: ±(0.4%+1)
 Fluke 87 V: ±(0.2%+1)
Maximum Resolution:  0.1Ω
Maximum Capacitance  9,999 µF
Accuracy  ±(1%+2)
Maximum Resolution  0.01 nF
Maximum Frequency  200 kHz
Accuracy  ±(0.005%+1)
Maximum Resolution  0.01 Hz
Duty Cycle
Maximum Duty Cycle  99.9%
Accuracy  ±(0.2% per khz +0.1%)
Maximum Resolution  0.1%
Temperature Measurement
Fluke 87 V, 87 V/E:  -200.0°C - 1090°C
 -328.0°F - 1994.0°F
 excluding probe
80 BK Temperature Probe
 -40.0°C - 260°C
 -40.0°F - 500°F, 2.2°C or 2% whichever is greater
Maximum Conductance  60.00 nS
Accuracy  ±(1.0%+10)
Maximum Resolution  0.01 nS
Range:  3 V
Resolution:  1 mV
Accuracy:  ± (2 % + 1)
Duty Cycle Range
Accuracy:  Within ± (0.2% per kHz + 0.1 %)

Environmental Specifications
Operating Temperature
 -20°C to +55°C
Storage Temperature
 -40°C to +60°C
Humidity (Without Condensation)
 0% - 90% (0°C - 35°C)
 0% - 70% (35°C - 55°C)
Operating Altitude
 2000 m

Safety Specifications
Overvoltage category
 EN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency Approvals
 UL, CSA, TÜV, VDE listed

Mechanical & General Specifications
 201 x 98 x 52 mm (with holster)
 355 g
Weigh With Holster and Flex-Stand
 624 g
Digital:  6000 counts updates 4/sec.
 (Model 87 also has 19,999 counts in high-resolution mode.)
Analog:  32 segments, updates 40/sec.
Frequency:  19,999 counts, updates 3/sec at > 10 Hz.
Battery Life
Alkaline:  ~400 hours typical, without backlight
 1 Meter drop per IEC 61010-1:2001
 Per MIL-PRF-28800 for a Class 2 instrument
Model NameDescription
Fluke 87VMultimeter
  • TL75 test leads
  • AC175 Alligator Clips
  • Holster
  • 9V battery (installed)
  • 80BK temperature probe
Fluke 83VMultimeter
  • TL75 test leads
  • AC175 Alligator Clips
  • Holster
  • 9V battery (installed)
Fluke 87V/E2 KitIncludes:
  • 87V Multimeter
  • TL224 silicone test leads
  • AC220 long reach alligator clips
  • TP238 test probes
  • TPAK ToolPak™ Magnetic Meter Hanging Kit
  • 80BK temperature probe
  • C35 lightweight soft accessory case 
  • 9V battery (installed)

AC220AC220 SureGrip™ Alligator Clips
AC280AC280 SureGrip™ Hook Clips
AC283AC283 SureGrip™ Pincer Clips
AC285AC285 SureGripTM Alligator Clips
AC87AC87 Heavy Duty Bus Bar Clip Set
AC89AC89 Heavy Duty Insulation Piercing Test Clip
BP980BP980 Double Banana Plug Kit
TLK225Fluke TLK-225 SureGrip™ Master Accessory Set

Test Probes
TP1TP1 Slim Reach Test Probe Set
TP2TP2 Slim Reach Test Probe Set
TP220TP220 SureGrip™ Industrial Test Probes
TP4TP4 Slim Reach Test Probe Set
TP74TP74 Lantern Tip Test Probe Set
TP80TP80 Electronic Test Probe Set
TP912TP912 Replacement Tips for TL910
TP920TP920 Test Probe Adapter Kit

Accessory Kits
TLK-220 USTLK-220 US SureGrip Industrial Test Lead

Cases and Holsters
C100C100 Universal Carrying Case
C101C101 Hard Case
C1600C1600 Gear Box for Meter and Accessories
C35C35 Soft Carrying Case
C550C550 Tool Bag
C800C800 Meter and Accessory Case
CXT80CXT80 Extreme Case
C25C25 Large Soft Case for DMMs





Camouflage Carrying Case for Fluke Meters

Camouflage Carrying Case for Fluke Meters

Camouflage Carrying Case for Fluke Meters

Camouflage Carrying Case for Fluke Meters

Camouflage Carrying Case for Fluke Meters

Fluke MeterCleaner WipesFluke MeterCleaner Wipes

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

  • 9 inch hook and loop strap
  • Universal hanger clip
  • Hook hanger for non magnetic surfaces
  • Strong magnet
H80MH80M Protective Holster with Magnetic Hanging Strap

Current Clamps
i1010i1010 AC/DC Current Clamp
i200i200 AC Current Clamp
i400i400 AC Current Clamp
Fluke i410AC/DC Current Clamp
i1010 Kiti1010-KIT AC/DC Current Clamp and Carry Case Kit
i2000 flexi2000 flex AC Current Clamp
i410-KITi410-KIT AC/DC Current Clamp and Carry Case Kit

Fiber Optics
FOM Fiber Optic Meter FOM Fiber Optic Meter

High Voltage Probes
80K-4080K-40 High Voltage Probe
80K-680K-6 High Voltage Probe

L200L200 Probe Light
L210L210 Probe Light Kit
L215L215 SureGrip™ Kit with Probe Light and Probe Extender

Test Leads, Probes and Clips
85RF85RF High Frequency Probe

Fluke TL80A Basic Electronic Test Lead Kit Includes:

  • One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender
  • C75 soft carrying case
  • One year warranty

PV350PV350 Pressure Vacuum Module

80AK-A80AK Thermocouple Adapter
80PK-1180PK-11 Type-K Flexible Cuff Thermocouple Temperature Probe
80PK-2480PK-24 SureGrip Air Temperature Probe
80PK-2580PK-25 SureGrip™ Piercing Temperature Probe
80PK-2680PK-26 SureGrip™ Tapered Temperature Probe
80PK-2780PK-27 SureGrip™ Industrial Surface Temperature Probe
80PK-880PK-8 Pipe Clamp Temperature Probe

Test Leads

SureGrip™ Industrial Test Lead Set includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Industrial Test Probe Set
  • TL224 SureGrip™ Silicone Test Lead Set (straight to right)
  • One year warranty
TL223TL223 Electrical Test Lead Set
TL224TL224 SureGrip™ Insulated Test Leads
TL71TL71 Premium Test Lead Set
TL81ATL81A Deluxe ElectronicTest Lead Kit
H900H900 Test Lead Holder
TL221TL221 SureGripTM Test Lead Extension Kit
TL222TL222 SureGripTM Silicone Insulated Test Leads
TL225TL225 SureGrip™ Stray Voltage Adapter Test Lead Kit
TL26ATL26A 60 in. 5-Way Test Lead Set
TL40TL40 Retractable Tip Test Lead Set
TL75TL75 Hard Point™ Test Lead Set
TL76TL76 All-in-one Test Lead Set
TL910TL910 Electronic Test Probe Set
TL930TL930 Patch Cord Set (60 cm)
TL932TL932 Patch Cord Set (90 cm)
TL935TL935 Patch Cord Kit (60, 90, 120 cm)
TL940TL940 Mini-Hook Test Lead Set
TL950TL950 Mini-Pincer Test Lead Set
TL960TL960 Micro-Hook Test Lead Set
TL970TL970 Hook and Pincer Kit
TLK220TLK-220 EUR SureGrip Industrial Test Lead Kit
Related Products
 AC280 SureGrip™ Hook Clips »
 Fluke C25 Large Soft Case for DMMs »
 Fluke CAMO-37 Camouflage Carrying Case »
Home  |   Site Map  |   Fluke Corporation  |  Safety Notices
Privacy Statement  |  Terms of Use   |  Terms and Conditions of Sale  |  Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation