Swedish

Fluke T5-600 Elektrisk Testare

  • Fluke T5-600 Voltage, Continuity and Current Tester - 1
  • Fluke T5-600 Voltage, Continuity and Current Tester

Nyckelfunktioner

  • Measure current up to 100 A without breaking the circuit
  • Meter automatically selects AC or DC voltage, up to 600 V
  • Resistance measurements up to 1000 Ω plus continuity test
  • Work in tight spaces with detachable SlimReach™ probe tips

Produktöversikt: Fluke T5-600 Elektrisk Testare

The T5-600 Electrical Tester is a versatile troubleshooting tool you can carry to every job site. Use it to check voltage, continuity, and current, all with one compact, rugged tool. Just select volts, ohms, or current and the tester does the rest. For higher voltage applications check out the Fluke T5-1000.

This meter is perfect for my use as I do HVAC and Electrical work, and this will give me what I need for troubleshooting and performance of equipment.” - Paul

Measure current up to 100 A without breaking the circuit with OpenJaw™ design

The trendsetting OpenJaw™ design allows for fast and easy current measurement, safely and without metallic contact to a live conductor. The integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester would be able to. The T5-600 is also designed to:

  • Withstand a 10 ft. (3 m) drop
  • Conserve battery life with auto-off mode
  • Fit in one hand with handy probe storage in the back of the holster
  • Accept Fluke accessory test clips with the test leads

Meter automatically selects AC or DC voltage for tests up to 600 V

Voltage tests are faster and easier than ever before. Just turn the knob to voltage (V) and place your leads on the test points. The T5-600 auto-selects either AC or DC voltage, depending on what is detected. This meter is suitable for both residential or commercial applications and is designed to keep you safe with a CAT III 600 V rating.

FieldSense Information

Learn how to use the T5:

Download the Quick Reference Guide
Download the T5 "How-To" Demonstration Guide
Read the FieldSense Proving Unit Demonstration Guide

FieldSense Quick Reference Guide

T6 Electrical Tester Helps Team at Cutting Edge Cancer Research Center

Specifikationer: Fluke T5-600 Elektrisk Testare

Specifications
Jaw opening12.9 mm (0.5 in)
Max wire size1/0 THHN Cable
Current range AC rms0 to 100.0 A
Accuracy AC current (50/60 Hz)3% ± 3 counts
AC responseAveraging
Voltage range AC/DC0 to 600 V
Voltage accuracyAC1.5% ± 2 counts
DC1% ± 1 count
Resistance range0 to 1000 Ω
Continuity beeper thresholdOn at < 25 Ω, off at > 400 Ω
Volts indicator LED thresholdGuaranteed on by 30 V AC
Environmental Specifications
Operating temperature-10°C to 50°C
Storage temperature-30°C to 60°C
Humidity (without condensation)0% to 95% (5°C to 30°C);
0% to 75% (30°C to 40°C);
0% to 45% (40°C to 50°C)
Dust/water resistanceYes
Operating altitude2000 meters max
Temperature coefficient0.1 x (specified accuracy)/°C (< 18°C or > 28°C)
Safety Specifications
Measurement CategoryIEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac
Agency approvalsCSA, TUV
Maximum voltage600 V between any terminal and earth ground
Mechanical and General Specifications
Size30.5 x 51 x 203 mm
Weight300 g
WarrantyTwo-years
Battery life200 hour zinc chloride, 400 hour alkaline
Battery type2 x AA
Low battery indicatorYes
Current sensor opening12.9 mm

Modeller: Fluke T5-600 Elektrisk Testare

Fluke T5-600

Testare för 600 V spänning, kontinuitet och ström

Köp den

Includes:

  • 600 V Voltage, continuity and current tester
  • 4 mm detachable probes
  • Instruction sheet