Process Control

Automation Systems

Keeping industrial automation systems up and running is critical. One failure can trigger others, and result in a significant loss of time and money. With the proper tools, you can troubleshoot, maintain, and calibrate automation systems equipment to ensure that maximum efficiency is achieved.

Click on the area below to identify potential problems, troubleshooting techniques and tools.

Troubleshooting process signals	Temperature calibrations	PLC or DCS I/O (inputs and outputs)	Switch testing	VFD's and VSD's
Troubleshooting process signals Electrical interference, ground loops, poor connections, or incorrect wiring will cause performance problems with your process signals. Use the Fluke Process tools to locate, correct, and test these signals.   Products Showcase 771 Milliamp Process Clamp Meter » 772 Milliamp Process Clamp Meter » 773 Milliamp Process Clamp Meter » 787 ProcessMeter » 789 ProcessMeter » Temperature calibrations There are three necessary elements needed to perform a temperature calibration: The ability to source/simulate a temperature signal, power for the transmitter, and the ability to measure the output mA value.   Products Showcase Fluke 724 Temperature Calibrator » Fluke 726 Precision Multifunction Process Calibrator » Fluke 744 Documenting Process Calibrator »   PLC or DCS I/O (inputs & outputs) Testing, troubleshooting, and calibrating inputs and outputs are vital to good control performance of your automated process control equipment. Whether it's 4-20mA, 1-5V dc, 0-10V dc, etc., Fluke has a process or calibration hand-held meter to do the job.   Products Showcase Fluke 715 Volt/mA Calibrator » 789 ProcessMeter » 771 Milliamp Process Clamp Meter » 772 Milliamp Process Clamp Meter » 773 Milliamp Process Clamp Meter » Fluke 726 Precision Multifunction Process Calibrator » Fluke 744 Documenting Process Calibrator »   Switch test Industrial switches, such as pressure and temperature switches, need to be set and/or adjusted to specific values for ideal control.   Products Showcase Fluke 719 Electric Pressure Calibrator » Fluke 718 Pressure Calibrator » Fluke 726 Precision Multifunction Process Calibrator » Fluke 744 Documenting Process Calibrator » VFD's and VSD's From troubleshooting the input/output power to testing the control signals.   Products Showcase 771 Milliamp Process Clamp Meter » 772 Milliamp Process Clamp Meter » 773 Milliamp Process Clamp Meter » 787 ProcessMeter » 789 ProcessMeter » Thermal Imaging » Fluke ScopeMeter® 225C »