|
|
|
|
|
|
|
|
|
 |
|  | |  | | | | | | | Quickly locate communication problems in your process
Verify bus control systems. See more, fix more.
Besides unrivalled scope performance, the Fluke 225C Color ScopeMeter portable oscilloscope is built for demanding industrial environments. With the Fluke ScopeMeter you can see what is really happening. The bus health test in the Fluke 215 or 225 analyses the electrical signals on the Industrial bus. A clear ‘Good’, ‘Weak’ or ‘Bad’ validation mark is presented for each of the relevant parameters, next to the actual measurement value. Measured values are compared to standard values based on the selected bus type.
Learn more about the ScopeMeter 2X5C Oscilloscope Use the interactive selection guide to find out which ScopeMeter suits your needs best. Then check out our application notes on a variety of topics.
Learn more about the ScopeMeter »
Request a demo »
Application notes »
Case Studies
Scenario 1: Signal integrity verification on Profibus systemBus systems are widely used for factory automation purposes. Downtime of the bus system may have a large negative impact on your production flow and production output.
This application note shows how preventive maintenance may reveal signal quality problems before they cause the bus -and your production- to come to a halt.
Application note »
Demo video »
Powerpoint »
Scenario 2: Elevator suddenly stops, in between floorsThe elevator system in an apartment block occasionally stopped in between floors, locking in the users. Initially, the power system was seen as the root cause but further investigations revealed an error on the bus system that controls the elevator.
Application note »
Demo video »
Powerpoint » | |
|
|
|
|
|
|
|
|
|
|