The most trusted tools in the world
Home  |  Products  |  Process Calibration Tools  |  Loop Calibrators  |  

Fluke 709 Precision Loop Calibrator

Fluke VT02 video
Watch now »

where to buy
Fluke 709 Precision Loop Calibrator
Fluke 709 Precision Loop Calibrator
Fluke 709 Precision Loop Calibrator
The Fluke 709 mA loop calibrator is designed to save time and produce high-quality results. This tool reduces the time it takes to measure, or source, voltage or current and power up a loop.
The Fluke 709 Precision Loop Calibrator is built around a user friendly interface with a Quick-Set rotary encoder knob. The protective holster easily fits into a technician’s hand and the large backlit display is easy to read, even in dark, cramped worked areas. The 709 offers:

  • Best-in-class accuracy at 0.01% reading
  • Small rugged design operates on (6) standard AAA batteries
  • Intuitive user interface with Quick-Set knob for fast setup, easy use
  • Built in selectable 250 Ω resistor for HART communication
  • 24 V DC loop power with mA Measure Mode (-25% to 125%)
  • Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
  • Simple two wire connection for all measurements
  • Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
  • Variable step & ramp time in seconds
  • Adjustable span selection (0 to 20 mA or 4 to 20 mA)
  • Valve Test (simulate defined mA values with % keys)
  • Fluke 709 Precision Loop Calibrator with built-in 250 ohm resistor 
    Detailed Specifications
    Functions mA source, mA simulate, mA read, mA read/loop power, and volts read.
    Ranges mA (0 to 24mA) and Volts (0 to 30VDC)
    Resolution 1 µA on mA ranges and 1 mV on voltage range
    Accuracy 0.01% +/- 2 counts, all ranges (@23° +/- 5°C)
    Operating Temperature Range -10 °C to 55 °C  (14 °F to 131°F)
    Humidity Range 10 to 95% non-condensing
    Stability 20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
    Display 128 x 64 pixels, LCD Graphic w/backlight, .34 high digits
    Power 6 AAA alkaline
    Battery Life 40 hours typical
    Loop Compliance Voltage 24VDC @ 20mA
    Over-Voltage Protection 240 VAC
    Overload Current Protection 28 mA DC
    EMC EN61326 Annex A (Portable Instruments)
    Dimensions (L x W x D) 15 cm x 9 cm x 3 cm  (6 x 3.6 x 1.3)
    Weight 0.3 kg  (9.5 ounces)
    Included Accessories NIST traceable calibration certificate with data, batteries, test leads, and manual
    Warranty Three year
    Model NameDescription
    Fluke 709

    Fluke 709 Precision Current Loop Calibrator including:

    • AC175 Alligator Clip Set
    • TL75 420l Test Leads
    • Soft Case
    • Six AAA batteries (installed)
    • Product Manual CD-ROM
    • Quick Reference Guide
    • Safety Information

    Clips
    AC220AC220 SureGrip™ Alligator Clip Set
    AC280AC280 SureGrip™ Hook Clips
    AC283AC283 SureGrip™ Pincer Clips
    AC285AC285 SureGrip™ Alligator Clip Set
    AC87AC87 Heavy Duty Bus Bar Clip Set
    AC89AC89 Heavy Duty Insulation Piercing Test Clip

    Test Probes
    TP1TP1 Slim Reach Test Probe (flat blade)
    TP2TP2 Slim Reach Test Probe (2 mm)
    TP220TP220 SureGrip™ Industrial Test Probes
    TP38TP38 Slim Reach Test Probe (insulated)
    TP4TP4 Slim Reach Test Probe (4 mm)
    TP74TP74 Lantern Tip Test Probes
    TP80TP80 Electronic Test Probes

    Software
    Fluke 709H/TrackFluke 709H/Track HART Communications Software
  • Fluke 709H/Track Software
  • Lemo/USB Communications Cable

  • Cases and Holsters
    C100C100 Hard Meter and Accessory Case
    C12AC12A Soft Meter Case
    C195C195 Soft Case
    C25C25 Soft Meter Case
    C800C800 Hard Meter and Accessory Case

    Test Leads, Probes and Clips
    TL80ATL80A Basic Electronic Test Lead Set

    Pressure
    PV350PV350 Pressure Vacuum Module

    Temperature
    80T-150UA80T-150U Universal Temperature Probe (for DMMs)
    80TK80TK Thermocouple Module (Type K)

    Test Leads
    TL27TL27 Heavy Duty Test Lead Set
    TL220TL220 SureGrip™ Industrial Test Lead Kit
    TL221TL221 SureGrip™ Extension Lead Set
    TL223TL223 SureGrip™ Electrical Test Lead Kit
    TL224TL224 SureGrip™ Silicone Test Lead Set
    TL238TL238 SureGrip™ Test Lead Set for High Energy Environments
    TL28ATL28A Automotive Test Lead Set
    TL71TL71 Test Lead Set
    TL75TL75 Hard Point Test Lead Set
    TL76TL76 All-in-one Test Lead Set
    TL81ATL81A Deluxe Electronic Test Lead Set
    Related Products
     
     Fluke 754 Documenting Process Calibrator-HART  »
    Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer© 1995 - 2013 Fluke Corporation