|
|
|
Measures temperature and microamps
The Fluke 16 measures temperature quickly and accurately. Standard equipment includes an 80BK integrated DMM temperature probe. A microamp function is included for flame sensor measurements down to 0.1 microamps. Use the Fluke to test motor start and run capacitors up to 10,000 microfarads. Rely on the Fluke 16 to make your everyday measurements - up to 600 volts ac or dc, 40 megohms, diode test and exceptionally fast continuity.
|
- Accurate temperature measurement from -40 to 400°C
- Confidently test flame sensor circuits with microamp measurement down to 0.1 microamps
- Capacitance up to 10,000 microfarads
- 0.9% basic DC accuracy
- 4000 count digital display
- Min/Max recording with relative time stamp records the highest and lowest voltage readings during a 100-hour period
- Automatic or manual ranging
- High resistance ranges to 40 megohms
- Millivolt range for compatibility with other accessories
- V-Check™ mode is designed for safety
- When measuring ohms, continuity, or diode test modes, the meter automatically switches to measuring ac or dc volts if more than 4.5V is present
- Continuity Capture™ locates intermittent opens as brief as 250 microseconds and identifies them in a symbolic display as short-to-open or open-to-short
- Sleep mode preserves battery life
|
|
| Specifications |
| Voltage DC |
| Maximum: |
600 V |
| Accuracy: |
(0.9% + 1) |
| Maximum Resolution: |
1 mV |
| | Voltage AC |
| Maximum: |
600 V |
| Accuracy: |
(1.9% + 2) |
| Maximum Resolution:
|
1 mV |
| Bandwith: |
50 to 400 Hz |
| | Current DC |
| Maximum: |
200 µA |
| Accuracy: |
1% + 2 |
| Maximum Resolution: |
0.1 µA |
| | Current AC |
| Maximum: |
200 µA |
| Accuracy: |
2% + 3 |
| Maximum Resolution: |
0.1 µA |
| Bandwith: |
50 to 400 Hz |
| | Resistance |
| Maximum: |
40 MΩ |
| Accuracy: |
0.9% + 1 |
| Maximum Resolution:
|
0.1 Ω |
| | Capacitance |
| Maximum: |
10.000 µF |
| Accuracy: |
1.9% + 2 |
| Maximum Resolution: |
0.001 µF |
| | Diode |
| Maximum: |
2.000 V |
| Accuracy: |
(1.9% + 2) |
| Resolution: |
1 mV |
| | Temperature |
| Range: |
-10 to 400 °C |
| Accuracy: |
(1% + 0.8 °C) (typical ) |
| Maximum Resolution:
|
0.1 °C |
| | Continuity |
| Beeper on |
<25 Ohm |
| Beeper off |
>250 Ohm |
|
| Environmental Specifications |
| Operating Temperature | | | Storage Temperature |
|
-30 °C to 60 °C indefinitely |
|
(to -40 °C for 100 hrs) |
| | Humidity (Without Condensation) |
|
0% to 90% (-10 °C to 35 °C) |
|
0% to 70% (35 °C to 50 °C) |
| | Temperature Coefficient |
|
(0.1 x specified accuracy)/°C (<18 °C or > 28 °C) |
|
| Safety Specifications |
| Overvoltage category |
|
EN 61010-1 to 600V CAT III |
|
| Mechanical & General Specifications |
| Size |
|
(H x W x L):3.46 cm x 7.05 cm x 14.23 cm |
|
(1.35 in x 2.75 in x 5.55 in) |
| | Weight | | | Warranty | | | Battery Life |
| Alkaline: |
~ 650 hours typical |
|
|
| Model Name | Description | Price List | | Fluke 16 |
Included accessories:
- 80BK integrated DMM temperature probe
- C10 Holster
- Test Leads
- Users manual
|
|
| Clips | | AC220 | AC220 SureGrip™ Alligator Clip Set | | AC280 | AC280 SureGrip™ Hook Clips | | AC285 | AC285 SureGrip™ Alligator Clip Set |
| Test Probes | | TP220 | TP220 SureGrip™ Industrial Test Probes |
| Cases and Holsters | | C100 | C100 Hard Meter and Accessory Case | | C101 | C101 Hard Case | | C12A | C12A Soft Meter Case | | C1600 | C1600 Gear Box for Meter and Accessories
| | C550 | C550 Tool Bag |
| Current clamps | | i1010 | i1010 AC/DC Current Clamp | | i200s | i200s AC Current Clamp | | i410 | i410 AC/DC Current Clamp |
| Lights | | L210 | L210 Probe Light + Probe Extender | | LVD1 | LVD1 Volt Light |
| Pressure | | PV350 | PV350 Pressure Vacuum Module |
| Temperature | | 80AK-A | 80AK-A Thermocouple Adapter | | 80PK-22 | 80PK-22 Immersion Probe | | 80PK-24 | 80PK-24 Air Probe | | 80PK-26 | 80PK-26 General Purpose Probe | | 80PK-27 | 80PK-27 Industrial Surface Probe | | 80PK-3A | 80PK-3A Surface Probe (Type K) | | 80PK-8 | 80PK-8 Pipe Clamp Temperature Probe (Type K) | | 80PK-9 | 80PK-9 General Purpose Probe (Type K) | | 80PK-EXT | 80PK-EXT Extension Wire Kit (Type K) |
| Test Leads | | TL220 | TL220 SureGrip™ Industrial Test Lead Kit | | TL221 | TL221 SureGrip™ Extension Lead Set | | TL223 | TL223 SureGrip™ Electrical Test Lead Kit | | TL224 | TL224 SureGrip™ Silicone Test Lead Set | | TL238 | TL238 SureGrip™ Test Lead Set for High Energy Environments | | TL71 | TL71 Test Lead Set | | TL75 | TL75 Hard Point Test Lead Set |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |