|
|
|
A pack of 3 pieces of the i5s current clamps, specially configured to provide low current accuracy while taking measurements on secondary current transformers. This cost-saving 3-pack is perfect for use with 3-phase tools such as the Fluke 434 or Fluke 435.
- Low level current clamp measures up to 5 A ac
- Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 inches)
- Take accurate readings without breaking the circuit
- CAT III 600 V (For insulated conductors only)
|
|
|
| Specifications |
| Nominal current range | | | Continuous current range | | | Maximum
Non-Destructive Current | | | Lowest measurable current | | | Basic Accuracy |
|
48 Hz to 65 Hz |
| 10 mA to 1 A |
1% + 5 mA |
| 1 A to 5 A |
1% |
| | Useable frequency | | | Output level(s) | | | Input Load Impedance |
|
> 1 MΩ in parallel with up to 47 pF |
| | Crest Factor |
|
≤ 3, add 0.7% to accuracy |
|
| Safety Specifications |
| Safety |
|
CAT III 600 V per IEC/EN61010-1, Pollution Degree 2 |
| | Maximum voltage | |
| Mechanical & General Specifications |
| Warranty | | | Maximum conductor diameter | | | Output cable length | | | BNC Adapter | | | BNC to banana adapter included | |
|
| Model Name | Description | | i5sPQ3 | i5sPQ3 AC Current Clamp, 3-pack |
|
|
|
|