|
|
|
CAT IV AC current clamp for DMM's
Fluke Current clamps are the ideal tools to extend the functionality of Fluke tools. The i400 is a single range 400 A ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1.
- Companion to your DMM to measure up to 400 A AC
- 1mA/Amp output guarantees easy reading on you meter
- Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
- Specially designed to offer maximum utility in a very compact shape
- Take accurate current readings without breaking the circuit
- Soft non-slippery overmold handle prevents from accidental touching live wiring
- Max. conductor Ø 32 mm
|
|
| Specifications |
| Nominal current range | | | Continuous current range | | | Maximum Non-Destructive Current | | | Lowest measurable current | | | Basic accuracy |
|
2% + 0.06 A |
|
(45-400 Hz) |
|
(% reading + floorspec) |
| | Useable frequency | | | Output level(s) | |
| Safety Specifications |
| Safety |
|
CAT IV 600 V, CAT III, 1000 V |
| | Maximum voltage |
|
1000 V AC rms from earth to ground, in compliance with EN61010 |
|
| Mechanical & General Specifications |
| Warranty | | | Maximum conductor diameter | | | Maximum conductor size (busbar) | | | Output cable length | | | Shrouded banana plugs | |
|
| Model Name | Description | | i400 | i400 AC Current Clamp |
|
|
|
|