|
|
|
Large AC Current Probe
The Fluke i1000s is a clamp-on ac current probe designed to expand oscilloscope applications in industrial and power environments. Ideal for measuring distorted current waveforms and harmonics.
This Current Probe provides the following features:
- Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit
- A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays
- Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector
- Can be used with Multimeters with optional PM9081/001 BNC/Banana adapter
- One year warranty
|
|
| Specifications |
| Nominal current range | | | Continuous current range |
|
0.1 A - 10 A |
|
0.1 A - 100 A |
|
1 A - 1000 A |
| | Maximum
Non-Destructive Current | | | Lowest measurable current | | | Basic Accuracy |
|
1% + 1 A |
|
(48-65 Hz) |
|
(% reading + floorspec) |
| | Useable frequency | | | Output level(s) | |
| Safety Specifications |
| Safety |
|
CAT III, 600 V |
|
CAT IV, 300 V |
| | Maximum voltage | |
| Mechanical & General Specifications |
| Warranty | | | Maximum conductor diameter | | | Output cable length | | | BNC Adapter | |
|
| Model Name | Description | | i1000s | i1000s AC Current Clamp (1000 A) |
|
|
|
|