|
|
|
The Fluke TiR2FT, TiR3FT and TiR4FT Thermal Imagers are for professionals demanding the best solutions for building diagnostic applications. All Fluke TiR Series models include the innovative IR-Fusion® Technology to assist you to better pinpoint building problems. IR-Fusion captures both a visual (or visible light) image and an infrared image and fuses them together - doesn't just overlay the image. It alligns the two on the imager for a more accurate view at any distance.
Use the Fluke TiR series thermal imagers for these and other types of building diagnostics applications:
Roofing Surveys
- Detect wet insulation in flat-roof systems quickly and efficiently. Find damaged portions of the roofing structure and repair or replace before the entire roof is contaminated.
|
Energy Audits
- Perform infrared energy audits for residential and commercial applications. Increase the thermal efficiency of a home or building by scanning for thermal heat loss and cool infiltration or exfiltration , moisture invasion, concrete integrity and heat ventilation problems.
|
Moisture/Restoration
- Accurately detect moisture issues located behind exterior and interior walls, in ceilings or under carpet-covered floors.
|
Mold Remediation
- Control mold by finding unknown sources of moisture that would otherwise go undetected. Infrared scanning is the fastest most efficient way to provide 100% moisture detection coverage
|
|
- Industry leading thermal sensitivity (to 0.05 °C NETD on the TiR4) provides fine resolution, and ultra high-quality images.
- IR-Fusion® technology automatically merges visual and thermal images, pinpointing trouble areas quicker by automatically relating thermal images with the real world. IR-Fusion is included with all models.
- The 180° articulating lens is great for viewing around obstructions.
- Large, 5” high resolution, high contrast display.
- A Vanadium Oxide focal plane array (to 320 by 240 pixels) and 20 mm high quality Germanium lens with continuous single finger focus provide exceptional image resolution.
- SmartView™ professional report writing software generates fast, easy customizable reports including rich image analysis with free updates for the life of your product.
- The intuitive operation with on-camera Windows CE interface makes it easy to use.
|
|
| TiR Series* |
| Imaging performance |
| VOx FPA Detector Size |
320 x 240 - TiR3, TiR4 |
|
160 x 120 - TiR2 |
| Detector Frame Rate (Hz)* |
60 – TiR3, TiR4 |
|
30 – TiR2 |
| Field of View (FOV) |
23º horizontal x 17º vertical |
| Spatial Resolution (IFOV) |
1.30 mrad – TiR3, TiR4 |
|
2.60 mrad – TiR2 |
| Min. Focus Distance |
0.15 m |
| Thermal Sensitivity (NETD) |
≤0.05 °C at 30 °C - (50mK)TiR4 |
|
≤0.07 °C at 30 °C - (70mK)TiR3, TiR2 |
| Focus |
Smart Focus: one finger continuous focus |
| | Temperature Performance |
| Calibrated temperature range |
-20 ˚C to 100 ˚C (-4 ºF to 212 ºF) |
| Fully radiometric |
76,800 calibrated pixels (19,200 on TiR2) |
| Accuracy |
±2 °C or 2% |
| Emissivity correction |
0.1 to 1.0 (0.01 increments) |
| Measurement Modes |
TiR2 / TiR4 - Centerpoint, center box (area min/max, average) moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below.
TiR3 - Centerpoint, center box (area min/max) |
| | Image Presentation |
| Digital display |
5" LCD |
| Video output |
RS170 EIA/NTSC or CCIR/PAL composite video |
| Palettes |
Grayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted |
| LCD Backlight |
Sunlight readable color LCD |
| | Other |
| Sofware included |
SmartView™ |
| Storage medium |
> 1000 IR images on
compact flash card
(1 GB)
Flash Memory |
| Laser pointer |
Yes |
| Built-in visible light camera |
Yes |
| IR-Fusion |
Yes |
| IR/Visible Alarm on camera |
Yes |
| Flash and torch light |
Yes |
| 180º articulating lens |
Yes |
| Optional lenses |
Yes |
| Windows CE based menu |
Yes |
| AutoCapture |
Yes |
| On board analysis functions |
Yes |
| User defined text annotations |
TiR2 and TiR4 only |
| Warranty |
2 years |
| | Optional Lenses |
| 54 mm telephoto lens |
High precision germanium lens |
| Field of view (FOV) |
9 degree horizontal x 6 degree vertical |
| Spatial resolution (IFOV) |
0.94 mrad |
| Min focus distance |
0.6 m |
| |
|
| 10.5 mm wide angle lens |
High precision germanium lens |
| Field of View (FOV) |
42 degree horizontal x 32 degree vertical |
| Spatial resolution (IFOV) |
2.45 mrad TiR4, TiR3 |
|
4.9 mrad TiR2 |
| Min focus distance |
0.3 m |
|
7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information.
| Mechanical & General Specifications |
| Operating Temperature |
|
-10° C to +50° C (14° F to 122° F) |
| | Storage Temperature |
|
-40° C to +70° C (-40° C to 158° F) |
| | Relative Humidity |
|
Operating and storage 10% to 95%, non-condensing |
| | Water and Dust Resistant: | | | Weight |
|
1.95 kg (4.3 lbs) |
|
(including batteries) |
| | Camera Size (HxWxD) |
|
162 x 262 x 101 mm (6.5" x 10.5" x 4.0") |
|
* Specifications with standard 20 mm Germanium lens
|
| Model Name | Description | Price List | | Fluke TiR3/FT-20 |
FLEXCAM THERMAL IMAGER WITH IR-FUSION
| | Fluke TiR4/FT-20 |
FLEXCAM THERMAL IMAGER WITH IR-FUSION
|
|
7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information.
|
|
|
|
|