|
|
|
The Fluke 715 Volt/ mA Calibrator delivers outstanding performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.
|
Features at a Glance
- Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
- Measure voltage output process signals from PLCs, transmitters
- Source or simulate 24 mA loop current
- Source voltage to 100 mV or 10V
- 24V loop supply with simultaneous current measurement
- Enhanced voltage and current measure and source accuracy
- Improved battery life
- 250 ohm HART resistor with loop power
- Holster features test lead storage
- Compatible with toolpack magnetic hanging system
- Step and linear ramp output function
- Configurable zero and span settings
|
|
| Functional specifications |
| Measure / Source mV |
| Range: |
0 to 200 mV |
| Resolution: |
0.01 mV |
| Accuracy: |
0.015% + 2 counts |
| | Measure / Source V |
| Range:
|
0 to 20 V |
| Resolution:
|
0.001 V |
| Accuracy: |
0.01% + 2 counts |
| | Measure / Source/ Simulate mA (% of span) |
| Range:
|
0 to 24 mA (-25% to 125%) |
| Resolution: |
0.001 mA |
| Accuracy: |
0.01% + 2 counts |
|
Note: Sink (simulate transmitter) Display mA or % of span |
|
| Specifications |
| Loop Power |
| Range: |
24 V dc |
| Accuracy: |
+/- 10% |
|
Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V |
| | Display | |
| Environmental Specifications |
| Operating Temperature | | | Storage Temperature | | | Humidity (Without Condensation) |
|
95% (10 ºC to 30 ºC) |
|
75% (30 ºC to 40 ºC) |
|
45% (40 ºC to 50 ºC) |
|
35% (50 ºC to 55 ºC) |
| | Operating Altitude | |
| Safety Specifications |
| Safety |
|
CSA C22.2 No. 1010.1:1992 |
|
| Mechanical & General Specifications |
| Size |
|
187 mm L x 87mm W x 32 mm |
|
(7.93 in. L x 3.86 in. W x 2.06 in D) |
| | Weight | | | Warranty | | | Shock & Vibration |
|
Random, 2G, 5-500 Hz |
|
1m drop test |
| | Battery type |
|
Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline |
|
|
| Model Name | Description | Price List | | Fluke 715 |
Volt/ mA Calibrator including:
- Protective Yellow Holster with Test Lead Storage
- Instructions Sheet (14 languages)
- single 9V alkaline battery
- Test Leads and Alligator Clips
- NIST- traceable calibration report and data
|
|
| Clips | | AC220 | AC220 SureGrip™ Alligator Clip Set | | AC280 | AC280 SureGrip™ Hook Clips | | AC283 | AC283 SureGrip™ Pincer Clips | | AC285 | AC285 SureGrip™ Alligator Clip Set | | AC87 | AC87 Heavy Duty Bus Bar Clip Set | | AC89 | AC89 Heavy Duty Insulation Piercing Test Clip | | BP980 | BP980 Double Banana Plug Kit |
| Test Probes | | TL910 | TL910 Electronic Test Probes | | TP1 | TP1 Slim Reach Test Probe (flat blade) | | TP2 | TP2 Slim Reach Test Probe (2 mm) | | TP220 | TP220 SureGrip™ Industrial Test Probes | | TP38 | TP38 Slim Reach Test Probe (insulated) | | TP4 | TP4 Slim Reach Test Probe (4 mm) | | TP74 | TP74 Lantern Tip Test Probes | | TP80 | TP80 Electronic Test Probes | | TP912 | TP912 Replacement Tips for TL910 | | TP920 | TP920 Test Probe Adapter Kit |
| Cases and Holsters | | C100 | C100 Hard Meter and Accessory Case | | C25 | C25 Soft Meter Case | | C510 | C510 Leather Meter Case | | C550 | C550 Tool Bag | | C800 | C800 Hard Meter and Accessory Case | | C90 | C90 Soft Meter Case | | CXT170 | CXT170 Extreme Case | | H80M | H80M Protective Holster with Magnetic Hanging Strap |
| Current clamps | | i1010 | i1010 AC/DC Current Clamp | | i410 | i410 AC/DC Current Clamp |
| Fiber Optics | | FOM Fiber Optic Meter
| FOM Fiber Optic Meter | | FOS-850 | FOS-850 Fiber Optic Light Source | | FOS-850/1300 | FOS-850/1300 Fiber Optic Light Source |
| Test Leads, Probes and Clips | | TL80A | TL80A Basic Electronic Test Lead Set |
| Pressure | | PV350 | PV350 Pressure Vacuum Module |
| Temperature | | 80T-150UA | 80T-150U Universal Temperature Probe (for DMMs) | | 80TK | 80TK Thermocouple Module (Type K) |
| Test Leads | | H900 | H900 Test Lead Holder | | TL27 | TL27 Heavy Duty Test Lead Set | | TL220 | TL220 SureGrip™ Industrial Test Lead Kit | | TL221 | TL221 SureGrip™ Extension Lead Set | | TL222 | TL222 SureGrip™ Silicone Test Lead Set | | TL223 | TL223 SureGrip™ Electrical Test Lead Kit | | TL224 | TL224 SureGrip™ Silicone Test Lead Set | | TL238 | TL238 SureGrip™ Test Lead Set for High Energy Environments | | TL28A | TL28A Automotive Test Lead Set | | TL40 | TL40 Retractable Tip Test Lead Set | | TL71 | TL71 Test Lead Set | | TL75 | TL75 Hard Point Test Lead Set | | TL76 | TL76 All-in-one Test Lead Set | | TL81A | TL81A Deluxe Electronic Test Lead Set | | TL930 | TL930 Patch Cord Set (60 cm) | | TL932 | TL932 Patch Cord Set (90 cm) | | TL935 | TL935 Patch Cord Kit (60, 90, 120 cm) | | TL940 | TL940 Mini-Hook Test Lead Set | | TL950 | TL950 Mini-Pincer Test Lead Set | | TL960 | TL960 Micro-Hook Test Lead Set | | TL970 | TL970 Hook and Pincer Kit |
|
|
|
|
|
|
|
|
|
|
|
|
| | |