The most trusted tools in the world
Home  |  Products  |  Process Calibration Tools  |  Loop Calibrators  |  

Fluke 707 Loop Calibrator

Fluke 707
The fastest, one-handed tool for loop checks.

The Fluke 707 Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new "Quick Click" knob making it extremely fast and easy to use. It features:

  • One handed user interface with "Quick Click" detented knob
  • mA sourcing, simulation and measurement
  • 0.015% accuracy and 0.001 mA resolution
  • Simultaneous mA and % of span display
  • Selectable step or ramp outputs
  • 24 V Loop supply with mA measure, including 250Ω HART resistor
  • 0-28 VDC measurement to check Loop Voltage
  • Easy battery exchange without opening the case
  • Compact case with separate protective holster
  • Three year warranty
The fast, one-handed tool for loop checks. Just click to calibrate.
This feature-rich solution combines the best features push-button and knob-base loop calibrator and offers:
  • Large display and simple, quick-click interface for easy one-handed operation.
  • Simultaneous mA and % readout for quick, easy interpretation of readings.
  • mA accuracy of 0.015%, superior to other loop calibrators in this price range.
  • 1 µA resolution for mA source, simulate and measure.
  • Push button 25% steps for fast, easy linearity checks.
  • 0-100% “span check” for fast confirmation of zero and span.
  • Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests.
  • 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
  • Measures V dc to 28 V.
  • Single 9V battery that is easily changed without braking calibration seal
  • 0 - 20 mA or 4 - 20 mA default start up modes.
  • Innovative output adjustment dial with 1 µA and 100 resolution.
  • HART ™ mode connects 250 Ω resistor in series with 24 V loop for compatibility with HART communicators.

Safety conformance

CSA C22.2 No. 1010.1:1992

Specifications
Current Measurement
Range:  0 to 24 mA
Resolution:  0.001 mA
Accuracy:  0.015% Rdg + 2 LSD
Current Sourcing
Range:  0 to 20 mA or 4 to 20 mA
Accuracy:  0.015% Rdg + 2 LSD
Drive Capability:  1200 Ω; 950 Ω at 20 mA in HART mode
Current Simulation
Range:  0 to 20 mA or 4 to 20 mA
Accuracy:  0.015% Rdg + 2 LSD
Ext. loop voltage requirement:  12-30 V
Loop Power
 While measuring mA, 24 V
Voltage measurement
Range:  0 to 28 V DC
Resolution:  1 mV
Accuracy:  0.015% Rdg + 2 LSD

Environmental Specifications
Operating Temperature
 -10ºC to 55ºC
Storage Temperature
 -30ºC to 60ºC
Humidity (Without Condensation)
 0 to 90% (0ºC to 35ºC); 0 to 70% (35ºC to 55ºC)
Temperature Coefficient
 -10ºC to 18ºC, 28ºC to 55ºC, ±.005% of range per ºC

Safety Specifications
Safety
 CSA C22.2 No. 1010.1:1992
EMC
 EN50082-1:1992 and EN55022:1994 Class B
Maximum voltage
 30V

Mechanical & General Specifications
Size
 152 x 70 x 41 mm
Weight
 224 g (340 g including holster)
Batteries
 One 9V battery Alkaline
Warranty
 Three years
Shock & Vibration
 per MIL-T-28800 for a Class 2 Instrument
Display current and % of span
 Yes
Auto step, auto ramp
 Yes
Span Check
 Yes
Model NameDescription
Fluke 707 Loop Calibrator including:
  • AC70A Alligator Clips
  • C10 protective yellow holster with Flex-Stand™
  • Instruction sheet
  • TL75 safety-designed test lead set
  • NIST- traceable calibration report and data

Cases and Holsters
C10C10 Meter Holster

Clips
AC220AC220 SureGrip™ Alligator Clip Set
AC280AC280 SureGrip™ Hook Clips
AC283AC283 SureGrip™ Pincer Clips
AC285AC285 SureGrip™ Alligator Clip Set
AC87AC87 Heavy Duty Bus Bar Clip Set
AC89AC89 Heavy Duty Insulation Piercing Test Clip
BP980BP980 Double Banana Plug Kit

Test Probes
TL910TL910 Electronic Test Probes
TP1TP1 Slim Reach Test Probe (flat blade)
TP2TP2 Slim Reach Test Probe (2 mm)
TP220TP220 SureGrip™ Industrial Test Probes
TP38TP38 Slim Reach Test Probe (insulated)
TP4TP4 Slim Reach Test Probe (4 mm)
TP74TP74 Lantern Tip Test Probes
TP80TP80 Electronic Test Probes
TP912TP912 Replacement Tips for TL910
TP920TP920 Test Probe Adapter Kit

Cases and Holsters
C100C100 Hard Meter and Accessory Case
C12AC12A Soft Meter Case
C195C195 Soft Case
C25C25 Soft Meter Case
C800C800 Hard Meter and Accessory Case

Test Leads, Probes and Clips
TL80ATL80A Basic Electronic Test Lead Set

Pressure
PV350PV350 Pressure Vacuum Module

Temperature
80T-150UA80T-150U Universal Temperature Probe (for DMMs)
80TK80TK Thermocouple Module (Type K)

Test Leads
H900H900 Test Lead Holder
TL27TL27 Heavy Duty Test Lead Set
TL220TL220 SureGrip™ Industrial Test Lead Kit
TL221TL221 SureGrip™ Extension Lead Set
TL222TL222 SureGrip™ Silicone Test Lead Set
TL223TL223 SureGrip™ Electrical Test Lead Kit
TL224TL224 SureGrip™ Silicone Test Lead Set
TL238TL238 SureGrip™ Test Lead Set for High Energy Environments
TL40TL40 Retractable Tip Test Lead Set
TL71TL71 Test Lead Set
TL75TL75 Hard Point Test Lead Set
TL76TL76 All-in-one Test Lead Set
TL81ATL81A Deluxe Electronic Test Lead Set
TL930TL930 Patch Cord Set (60 cm)
TL932TL932 Patch Cord Set (90 cm)
TL935TL935 Patch Cord Kit (60, 90, 120 cm)
TL940TL940 Mini-Hook Test Lead Set
TL950TL950 Mini-Pincer Test Lead Set
TL960TL960 Micro-Hook Test Lead Set
TL970TL970 Hook and Pincer Kit
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer© 1995 - 2013 Fluke Corporation