Keep your world up and running.
Home  |  Produtos  |  Verificadores Eléctricos   |  Verificadores eléctricos  |  
Este produto não é mais fabricadoA Fluke sugere:
Fluke 2AC VoltAlert™ Voltage Detector
Fluke 1AC-II / 1LAC-II VoltAlert
LVD2 Volt Light

Fluke VoltAlert™ 1AC

 Fluke VoltAlert
Easy-To-Use Voltage Detector

VoltAlert™ ac voltage tester from Fluke are easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.

  • Fits in a shirt pocket for convenience
  • All outer surfaces are non-conductive for safety
  • Detects voltage without metallic contact
  • Manufactured, printed and packaged in the US
  • Quickly locates the hot, neutral and ground terminals in any receptacle
 1AC-A (90 - 600 Volts AC)
 1AC-P (200 - 600 Volts AC)
 1AC-A (110 - 1000 Volts AC) Australia only
 1AC-P2 (200 - 600 Volts AC) NZ only

Environmental Specifications
Operating Temperature
 -10°C to 50 °C (14°F to 122°F)
Humidity (Without Condensation)
 0 °C to 30 °C, 95% (32°F to 86°F)
 30 °C to 40 °C, 75% (86°F to 104°F)
 40 °C tp 50 °C, 45% (104°F to 122°F)
Operating Altitude
 3000 m (9750 ft max)
 IEC 529, IP54

Safety Specifications
Safety Rating
 CAT III-600 V
 IEC 1010-1, 1990
 IEC 1010-2-031

Mechanical & General Specifications
 146mm L x 19 mm D (5.75" L x 0.75" D)
 41 g with batteries (1.45 oz)
Outer surface
 Probe is composed of injection molded high-impact, non-flammable PVC and ABS
Nome do modeloDescriçãoPreço
Fluke 1ACAC Voltage Detector A pedido
Fluke 1LACAC Low Voltage Detector A pedido
Página inicial   |  Mapa do Site   |  SLA da Fluke  |  Declaração de Privacidade   |  Termos de Utilização   |  Termos e Condições © 1995 - 2018 Fluke Corporation