Português

i200 Pinça de corrente CA

  • Fluke i200 AC Current Clamp
  • Fluke i200 AC Current Clamp

Características principais

  • Companion to a DMM for measuring up to 200 A AC
  • 1 mA per Amp output guarantees easy reading on you meter
  • Take accurate current readings without breaking the circuit
  • Max. conductor Ø 20 mm
  • CAT III 600 V safety rating

Descrição do produto: i200 Pinça de corrente CA

The i200 is a single range 200 A clamp-on AC Current Clamp with current output via safety shrouded banana plugs. The i200s is a dual range 20 A and 200 A clamp-on AC Current Clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana input. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

Especificações: i200 Pinça de corrente CA

Specifications
Nominal current range200 A
Continuous current range0.5 A - 200 A
Maximum non-destructive240 A
Lowest measurable current0.5 A
Basic accuracy1% + 0.5 A
(48-65 Hz)
(% reading + floorspec)
Useable frequency40 Hz - 10 kHz
Output level(s)1 mA/A
Safety Specifications
SafetyCAT III, 600 V
Maximum voltage600 V AC
Mechanical and General Specifications
Warranty1 year
Maximum conductor diameter20 mm
Maximum conductor size (busbar)20 x 5 mm
Output cable length1.5 m
Shrouded banana plugsYes

Modelos: i200 Pinça de corrente CA

Fluke i200
Compre