Português

i1010 Pinça de corrente CA/CC

  • Fluke i1010 AC/DC Current Clamp

Características principais

  • The Fluke i1010 AC/DC current clamp is a battery-powered Hall-effect probe that extend the current ranges of Fluke tools, measuring DC current from 1 A to 1000 A and AC current from 1 A to 600A.
  • Provides accurate current reading without breaking the circuit.
  • Compatible with most Fluke multimeters.
  • CAT III 600 V safety rating

Descrição do produto: i1010 Pinça de corrente CA/CC

Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.

Especificações: i1010 Pinça de corrente CA/CC

Specifications
Measurement typeHall sensor
Nominal current range600 A, AC
1000 A, DC
Continuous current range1 A - 600 A, AC
1 A - 1000 A, DC
Maximum non-desctructive current1000 A
Lowest measureable current0.5 A
Basic accuracy2% + 0.5 A
(% reading + floorspec)
Useable frequencyDC - 10 kHz
Output level(s)1 mV/A
Zero error adjustmentYes
Safety Specifications
SafetyCAT III, 600 V
Maximum voltage600 V
Mechanical and General Specifications
Warranty1 year
Battery life9 V, 60 h
Maximum conductor diameter30 mm
2 x 25 mm
Output cable length1.6 m
Shrouded banana plugsYes

Modelos: i1010 Pinça de corrente CA/CC

Fluke i1010

Fluke i1010 AC/DC Current Clamp

Compre