Middle East [Change]  |  Fluke [Change Company]
fluke
Home  |  Products  |  Digital Multimeters  |  
Contact usRefer this page
This product is discontinued or reclassifiedFluke suggests:
Fluke 116 HVAC Multimeter with Temperature and Microamps

Fluke 16 Multimeter

 Fluke 16
Measures temperature and microamps

The Fluke 16 measures temperature quickly and accurately. Standard equipment includes an 80BK integrated DMM temperature probe. A microamp function is included for flame sensor measurements down to 0.1 microamps. Use the Fluke to test motor start and run capacitors up to 10,000 microfarads. Rely on the Fluke 16 to make your everyday measurements - up to 600 volts ac or dc, 40 megohms, diode test and exceptionally fast continuity.

  • Accurate temperature measurement from -40 to 400°C
  • Confidently test flame sensor circuits with microamp measurement down to 0.1 microamps
  • Capacitance up to 10,000 microfarads
  • 0.9% basic DC accuracy
  • 4000 count digital display
  • Min/Max recording with relative time stamp records the highest and lowest voltage readings during a 100-hour period
  • Automatic or manual ranging
  • High resistance ranges to 40 megohms
  • Millivolt range for compatibility with other accessories
  • V-Check™ mode is designed for safety
  • When measuring ohms, continuity, or diode test modes, the meter automatically switches to measuring ac or dc volts if more than 4.5V is present
  • Continuity Capture™ locates intermittent opens as brief as 250 microseconds and identifies them in a symbolic display as short-to-open or open-to-short
  • Sleep mode preserves battery life
Specifications
Voltage DC
Maximum:  600 V
Accuracy:  (0.9% + 1)
Maximum Resolution:  1 mV
Voltage AC
Maximum:  600 V
Accuracy:  (1.9% + 2)
Maximum Resolution:  1 mV
Bandwith:  50 to 400 Hz
Current DC
Maximum:  200 µA
Accuracy:  1% + 2
Maximum Resolution:  0.1 µA
Current AC
Maximum:  200 µA
Accuracy:  2% + 3
Maximum Resolution:  0.1 µA
Bandwith:  50 to 400 Hz
Resistance
Maximum:  40 MΩ
Accuracy:  0.9% + 1
Maximum Resolution:  0.1 Ω
Capacitance
Maximum:  10.000 µF
Accuracy:  1.9% + 2
Maximum Resolution:  0.001 µF
Diode
Maximum:  2.000 V
Accuracy:  (1.9% + 2)
Resolution:  1 mV
Temperature
Range:  -10 to 400 °C
Accuracy:  (1% + 0.8 °C) (typical )
Maximum Resolution:  0.1 °C
Continuity
Beeper on  <25 Ohm
Beeper off  >250 Ohm

Environmental Specifications
Operating Temperature
 -10 °C to 50 °C
Storage Temperature
 -30 °C to 60 °C indefinitely
  (to -40 °C for 100 hrs)
Humidity (Without Condensation)
 0% to 90% (-10 °C to 35 °C)
 0% to 70% (35 °C to 50 °C)
Temperature Coefficient
 (0.1 x specified accuracy)/°C (<18 °C or > 28 °C)

Safety Specifications
Overvoltage category
 EN 61010-1 to 600V CAT III

Mechanical & General Specifications
Size
 (H x W x L):3.46 cm x 7.05 cm x 14.23 cm
 (1.35 in x 2.75 in x 5.55 in)
Weight
 286 g
Warranty
 3 years
Battery Life
Alkaline:  ~ 650 hours typical
Model NameDescriptionPrice List
Fluke 16 Included accessories:
  • 80BK integrated DMM temperature probe
  • C10 Holster
  • Test Leads
  • Users manual
On Request

ClipsPrice List
AC220AC220 SureGrip™ Alligator Clip SetOn Request
AC280AC280 SureGrip™ Hook ClipsOn Request
AC285AC285 SureGrip™ Alligator Clip SetOn Request

Test ProbesPrice List
TP220TP220 SureGrip™ Industrial Test ProbesOn Request

Cases and HolstersPrice List
C100C100 Hard Meter and Accessory CaseOn Request
C101C101 Hard CaseOn Request
C12AC12A Soft Meter CaseOn Request
C1600C1600 Gear Box for Meter and Accessories On Request
C550C550 Tool BagOn Request
Fluke MeterCleaner WipesFluke MeterCleaner WipesOn Request

Current clampsPrice List
i1010i1010 AC/DC Current ClampOn Request
i200si200s AC Current ClampOn Request
i410i410 AC/DC Current ClampOn Request

LightsPrice List
L205L205 Mini Hat LightOn Request
L210L210 Probe Light + Probe ExtenderOn Request
LVD1LVD1 Volt LightOn Request

PressurePrice List
PV350PV350 Pressure Vacuum ModuleOn Request

TemperaturePrice List
80AK-A80AK-A Thermocouple AdapterOn Request
80PK-2280PK-22 Immersion Probe On Request
80PK-2480PK-24 Air Probe On Request
80PK-2680PK-26 General Purpose ProbeOn Request
80PK-2780PK-27 Industrial Surface ProbeOn Request
80PK-3A80PK-3A Surface Probe (Type K)On Request
80PK-880PK-8 Pipe Clamp Temperature Probe (Type K)On Request
80PK-980PK-9 General Purpose Probe (Type K)On Request
80PK-EXT80PK-EXT Extension Wire Kit (Type K)On Request

Test LeadsPrice List
TL220TL220 SureGrip™ Industrial Test Lead KitOn Request
TL221TL221 SureGrip™ Extension Lead SetOn Request
TL223TL223 SureGrip™ Electrical Test Lead KitOn Request
TL224TL224 SureGrip™ Silicone Test Lead SetOn Request
TL238TL238 SureGrip™ Test Lead Set for High Energy EnvironmentsOn Request
TL71TL71 Test Lead SetOn Request
TL75TL75 Hard Point Test Lead SetOn Request
Search Fluke
ResourcesProducts
Find Resources

Home | Site Map | Fluke Corporation  | Terms and Conditions | Privacy Statement | Disclaimer© 1995 - 2013 Fluke Corporation