Predictive Maintenance, Fluke Ti25

The ultimate tools for troubleshooting and maintenance

This thermal Imager is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.

IR-Fusion® Technology
See things both ways—infrared and visual (visible light) images combined together communicating critical information faster and easier—traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and combines it together, taking the mystery out of IR image analysis. IR-Fusion is standard on Fluke Ti25.

Enhanced problem detection and analysis capabilities with IR-Fusion® Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images.
Optimized for field use in harsh work environments.
Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool?
Withstands dust and water—tested to an IP54 rating.
Delivers the clear, crisp images needed to find problems fast.
Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD).
Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.
Reflected background temperature (reflected temperature compensation)
No need to carry pen and paper—record findings by speaking into the camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference.
Adjustable hand strap for left-or right-handed use.

Specifications

Temperature
Temperature measurement range (not calibrated below -10 °C)	-20 °C to +350 °C (-4 °F to + 662 °F) (two ranges)
Temperature measurement accuracy	± 2 °C or 2 % (whichever is greater)
On-screen emissivity correction	Yes

Imaging performance
Field of view	23° x 17°
Spatial resolution (IFOV)	2.5 mRad
Minimum focus distance	Thermal lens: 15 cm (6 in) Visible (visual) light lens: 46 cm (18 in)
Focus	Manual
Image frequency	9 Hz refresh rate
Detector type	160 X 120 focal plane array, uncooled microbolometer
Infrared lens type	20 mm F = 0.8 lens
Thermal sensitivity (NETD)	≤ 0.09 °C at 30 °C target temp. (90 mK)
Infrared spectral band	7.5 μm to 14 μm
Visual camera	640 x 480 resolution

Image presentation
Palettes	Ironbow, blue-red, high contrast, amber, hot metal, grey
Level and span	Smooth auto-scaling and manual scaling of level and span
Minimum span (in manual mode)	2.5 °C (4.5 °F)
Minimum span (in auto mode) Fast Auto/Manual Range Toggle Fast Auto Rescale	5 °C (9 °F)
IR-Fusion® information	Full infrared with MAX, MID, or MIN automatic blending; and picture-in-picture with MAX, MID, or MIN automatic blending (Visual and IR blending)
Picture-In-Picture (PIP)	Three levels of on-screen IR blending displayed in center 320 x 240 pixels
Full screen (PIP off)	Three levels of on-screen IR blending displayed in center 640 x 480 LCD

Image capture and data storage
Voice annotation	60 seconds maximum recording time per image; reviewable playback on imager
Storage medium	SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images)
File formats	Non-radiometric (.bmp) or fully-radiometric (.is2) No analysis software required for non-radiometric (.bmp) files
Export file formats w/SmartView® software	JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF

General specifications
Operating temperature	-10 °C to +50 °C (14 °F to 122 °F)
Storage temperature	-20 °C to +50 °C (-4 °F to 122 °F) without batteries
Relative humidity	10 % to 90 % non-condensing
Display	9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto)
Controls and adjustments	User selectable temperature scale (°C/°F) Language selection Time/Date set
Software	SmartView® full analysis and reporting software included
Batteries	Internal rechargeable battery pack (included)
Battery life	Three to four hours continuous use (assumes 50 % brightness of LCD)
Battery charge time	Two hours for full charge
AC operation/charging	AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included.
Power saving	Sleep mode activated after 5 minutes of inactivity, automatic power off after 20 minutes of inactivity
Safety standards	CE Directive:IEC/EN 61010-1 2nd Edition Pollution Degree 2
Electromagnetic compatibility	EN61326-1
C Tick	IEC/EN 61326
US FCC	CFR 47, Part 15 Class A
Vibration	2 G, IEC 68-2-29
Shock	25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides}
Drop	0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in)
Dimensions (H x W x L)	1.2 kg (2.65 lb)
Weight (battery included)	2 G, IEC 68-2-29
Enclosure rating	IP54 (protected against dust, limited ingress; protection against water spray from all directions)
Warranty	Two-years (standard)
Recommended calibration cycle	Two-years (assumes normal operation and normal aging)
Supported Languages	Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish