Middle East [Change]  |  Fluke [Change Company]
 fluke
Home  |  Products  |  Process Calibration Tools  |  Loop Calibrators  |  
Contact usRefer this page

Fluke 705 Loop Calibrator

Contact Me
Request A Demo
Fluke 705

The Fluke 705 Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops. It features:

  • mA sourcing, simulation and measurement
  • 0.02% accuracy and 0.001 mA resolution
  • Simultaneous mA and % of span display
  • Selectable step or ramp outputs
  • 24 V Loop supply with mA measure
  • 0-28 VDC measurement to check Loop Voltage
  • Easy battery exchange without opening the case
  • Compact case with separate protective holster
  • Three year warranty
Low cost calibrator muscle.
For a powerful loop calibrator at a very affordable price, choose the new Fluke 705 Loop Calibrator. This feature-rich solution to loop calibration, maintenance and repair offers:
  • A large display and simple, pushbutton interface for ease of use.
  • Simultaneous mA and % readout for quick, easy interpretation of readings.
  • mA accuracy of 0.02%
  • Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls.
  • "Span Check" for fast confirmation of zero and span.
  • Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests.
  • 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
  • Single 9V battery that is easily changed.
  • 0 - 20 mA or 4 - 20 mA default start up modes.

Safety conformance

CSA C22.2 No. 1010.1:1992

Specifications
Current Measurement
Range:  0 to 24 mA
Resolution:  0.001 mA
Accuracy:  0.02% Rdg + 2 LSD
Current Sourcing
Range:  0 to 20 mA or 4 to 20 mA
Accuracy:  0.025% Rdg + 2 LSD
Drive Capability:  1000 Ω @ 24 mA
Current Simulation
Range:  0 to 20 mA or 4 to 20 mA
Accuracy:  0.025% Rdg + 2 LSD
Ext. loop voltage requirement:  12-30 V
Loop Power
 While measuring mA, 24 V
Voltage measurement
Range:  0 to 28 V DC
Resolution:  1 mV
Accuracy:  0.025% Rdg + 2 LSD

Environmental Specifications
Operating Temperature
 -10 ºC to 55 ºC
Storage Temperature
 -40 ºC to 60 ºC
Humidity (Without Condensation)
 0 to 90% (0 ºC to 35 ºC); 0 to 70% (35 ºC to 55 ºC)
Temperature Coefficient
 -10 ºC to 18 ºC, 28 ºC to 55 ºC, ±.005% of range per ºC

Safety Specifications
Safety
 CSA C22.2 No. 1010.1:1992
EMC
 EN50082-1:1992 and EN55022:1994 Class B
Maximum voltage
 30 V

Mechanical & General Specifications
Size
 152 x 70 x 41 mm
Weight
 340g
Batteries
 One 9V battery
Warranty
 Three years
Shock & Vibration
 per MIL-T-28800 for a Class 2 Instrument
Display current and % of span
 Yes
Auto step, auto ramp
 Yes
Span Check
 Yes
Model NameDescriptionPrice List
Fluke 705 Loop Calibrator including:
  • AC70A Alligator Clips
  • C10 protective yellow holster with Flex-Stand™
  • Instruction sheet
  • TL75 safety-designed test lead set
  • NIST- traceable calibration report and data
 		On Request

Cases and HolstersPrice List
C10C10 Meter HolsterOn Request

ClipsPrice List
AC220AC220 SureGrip™ Alligator Clip SetOn Request
AC280AC280 SureGrip™ Hook ClipsOn Request
AC283AC283 SureGrip™ Pincer ClipsOn Request
AC285AC285 SureGrip™ Alligator Clip SetOn Request
AC87AC87 Heavy Duty Bus Bar Clip SetOn Request
AC89AC89 Heavy Duty Insulation Piercing Test ClipOn Request

Test ProbesPrice List
TP1TP1 Slim Reach Test Probe (flat blade)On Request
TP2TP2 Slim Reach Test Probe (2 mm)On Request
TP220TP220 SureGrip™ Industrial Test ProbesOn Request
TP38TP38 Slim Reach Test Probe (insulated)On Request
TP4TP4 Slim Reach Test Probe (4 mm)On Request
TP74TP74 Lantern Tip Test ProbesOn Request
TP80TP80 Electronic Test ProbesOn Request

Cases and HolstersPrice List
C100C100 Hard Meter and Accessory CaseOn Request
C12AC12A Soft Meter CaseOn Request
C195C195 Soft Case On Request
C25C25 Soft Meter CaseOn Request
C800C800 Hard Meter and Accessory CaseOn Request

Test Leads, Probes and ClipsPrice List
TL80ATL80A Basic Electronic Test Lead SetOn Request

PressurePrice List
PV350PV350 Pressure Vacuum ModuleOn Request

TemperaturePrice List
80T-150UA80T-150U Universal Temperature Probe (for DMMs)On Request
80TK80TK Thermocouple Module (Type K)On Request

Test LeadsPrice List
TL27TL27 Heavy Duty Test Lead SetOn Request
TL220TL220 SureGrip™ Industrial Test Lead KitOn Request
TL221TL221 SureGrip™ Extension Lead SetOn Request
TL223TL223 SureGrip™ Electrical Test Lead KitOn Request
TL224TL224 SureGrip™ Silicone Test Lead SetOn Request
TL238TL238 SureGrip™ Test Lead Set for High Energy EnvironmentsOn Request
TL28ATL28A Automotive Test Lead SetOn Request
TL71TL71 Test Lead SetOn Request
TL75TL75 Hard Point Test Lead SetOn Request
TL76TL76 All-in-one Test Lead SetOn Request
TL81ATL81A Deluxe Electronic Test Lead SetOn Request
Search Fluke
ResourcesProducts
Find Resources
Home | Site Map | Fluke Corporation  | Terms and Conditions | Privacy Statement | Disclaimer© 1995 - 2013 Fluke Corporation