Fluke 1650 Series Multifunction Installation Testers

Safer, easier installation testing.

The 1650 Series testers verify the safety of electrical installations in domestic, commercial and industrial applications. They can ensure that fixed wiring is safe and correctly installed to meet the re
quirements of IEC 60364, HD 384 and all relevant local standards

Faster

Two measurements at once and a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel, saves you more than 50% of test time compared to other loop testers. Additional new high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCD’s. Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation. Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections.

Safer

Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations. Supplied with the SureGrip™ test leads and clips which gives the user a comfortable, reliable grip

Easy

Rotary dial knob indicates clear which function is selected, all functionalities on one spot and no complex multi level menus. Large display with backlight, clear symbols and with exceptionally wide viewing angle for easy and safe readings. PASS/FAIL indication for RCD test results. Variable RCD current mode for customized settings. Loop & Line Resistance - mΩ resolution Test smooth dc sensitive RCDs (Type B) Extended Memory Extended documentation mode (UK only)

Rugged & lightweight

Withstands a drop of 1 meter. Compact, lightweight (less than 1.3 kg) and padded neck-strap to free your hands for all day testing.

	Complete kit All 1650 models are equipped with detachable leads that can be replaced in case of damage or loss. A durable hard case will protect your instrument in tough field conditions.
	Slim probe design with test button Keeps your eyes on the panel while probing hard to reach points. This remote probe is powered by the tester so always operable (does not require additional batteries).
	Zero Adapter For easy, always reliable and accurate compensation of test leads and mains cords. This adapter can be used for all different kind of mains plugs as well as test accessories like probes, alligator clips etc.

Specifications
AC Voltage Measurement	Range:  500 V Resolution:  0.1 V Accuracy (50 - 60 Hz)  ± (0.8% + 3 digits) Input Impedance  3.3 MΩ Overload Protection  660 Vrms
Continuity Testing	Range (autoranging):  20 Ω, 200 Ω, 2000 Ω Resolution:  0.01 Ω, 0.1 Ω, 1 Ω Test Current:  > 200 mA Open Circuit Voltage:  > 4 V Accuracy:  ± (1.5%+3 digits)
Insulation Resistance Measurement	Test Voltage:   Fluke 1652C:  250 - 500 - 1000 V Fluke 1653B + 1654B:  50 - 100 - 250 - 500 - 1000 V       Test Voltage:  50 V Test Current:  1 mA @ 50 kΩ Insulation Range:  10 kΩ - 50 мΩ Resolution:  0.01 мΩ Accuracy:  ± (3% + 3 digits)     Test Voltage:  100 V Test Current:  1 mA @ 100 kΩ Range/Resolution:  20 MΩ/0.01 MΩ Range/Resolution:  100 MΩ/0.1 MΩ Accuracy:  ± (3% + 3 digits)     Test Voltage:  250 V Test Current:  1 mA @ 250 kΩ Range/Resolution:  20 MΩ/0.01 MΩ Range/Resolution:  200 MΩ/0.1 MΩ Accuracy:  ± (1.5% + 3 digits)     Test Voltage:  500 V Test Current:  1 mA @ 500 kΩ Range/Resolution:  20 MΩ/0.01 MΩ Range/Resolution:  200 MΩ/0.1 MΩ Accuracy:  ± (1.5% + 3 digits) Range/Resolution:  500 MΩ/1 MΩ Accuracy:  10%     Test Voltage:  1000 V Test Current:  1 mA @ 1 MΩ Range/Resolution:  20 MΩ/0.01 MΩ Range/Resolution:  200 MΩ/0.1 MΩ Accuracy:  ± (1.5% + 3 digits) Range/Resolution:  500 MΩ/1 MΩ Accuracy:  10%     Auto Discharge:  Discharge time constant, 0.5 second for C = 1 µF or less Live Circuit Detection:  Inhibits test if terminal voltage > 30 V prior to initiation of test Maximum Capacitive Load:  Operable with the 5 µF load
Loop Impedance Measurement (High Current Mode and Non-Trip Mode)	Range:  100 - 500 VAC (50/60 Hz) Input connection:  Soft Key selection Loop impedance:  Phase to earth Line impedance:  Phase to neutral Limit on consecutive tests:  Automatic thermal shutdown after 50 consecutive tests at 10 second intervals (typical)   Max. Test Current High Current Mode:   Non-Trip Mode:     Range/Resolution (High Current):  20 Ω/0.001Ω (1mΩ) (Fluke 1654B) Range/Resolution:  20 Ω/0.01 Ω Range/Resolution:  200 Ω/0.1 Ω Range/Resolution:  2000 Ω/1 Ω   Accuracy (no Trip mode):  ± (3% + 6 digits) Accuracy (Hi Current mode):  ± (2% + 4 digits) Accuracy (Hi Current mode 1mΩ):  ± (2% + 15 digits) (Fluke 1654B)
PFC, PSC Test	Computation:  PFC or PSC determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance Range:  0 - 25 kA Resolution (Ik < 1000 A):  1 A Resolution (Ik >= 1000 A):  0.1 kA Accuracy:  Determined by accuracy of loop resistance and mains voltage measurements.
RCD Testing ¹	Fluke 1652C  AC, G, S, A Fluke 1653B  AC, G, S, A Fluke 1654B  AC, G, S, A, B
Tripping Time Test (ΔT)	Trip Time Accuracy  ±(1% Reading + 1 digit)   Multiplier:  x ½ Current Settings:  10, 30, 100, 300, 500, 1000 mA Current Accuracy:  +0% - 10% RCD Type ¹:  G Measurement Range:  310 ms (Europe), 2000 ms (UK) RCD Type ¹:  S Measurement Range:  510 ms (Europe), 2000 ms (UK)   Multiplier  x 1 Current Settings:  10, 30, 100, 300, 500, 1000 mA Current Accuracy:  +10% - 0% RCD Type ¹:  G Measurement Range:  310 ms RCD Type ¹:  S Measurement Range:  510 ms   Multiplier:  x 5 Current Settings:  10, 30 mA Current Accuracy:  ±10% RCD Type ¹:  G Measurement Range:  50 ms RCD Type ¹:  S Measurement Range:  160 ms
Tripping Current (ramp)	Current Range:  50% - 110% of RCD's rated current Step Size:  10% of IΔN Dwell time (Type G): ¹  300 ms / step Dwell time (Type S): ¹  500 ms / step Trip Current Measurement Accuracy:  ±5%
Earth Resistance Test (RE) - Fluke 1653B + 1654B	Range/Resolution:  200 Ω/0.1 Ω Accuracy:  ±(2% + 5 digits) Range/Resolution:  2000 Ω/1 Ω Accuracy:  ±(3.5% + 10 digits) Frequency:  128 Hz Compliance Voltage:  +25 V
Phase Sequence Indication	Icon:  Icon Phase Sequence indicator is active Display of Phase Sequence:    Displays ‘1-2-3’ in digital display field for correct sequence.  Displays ‘3-2-1’ for incorrect phase.  Dashes in place of a number indicate a valid determination could not be made.
¹ RCD Types	G  General, no delay S  Time delay A  Responds to pulsed signal AC  Responds to AC B   1654B

Environmental Specifications
Operating Temperature	-10 °C to 40 °C
Humidity (Without Condensation)	10 to 30 °C:  95% 30 to 40 °C:  75%

Safety Specifications
Safety Rating	EN 61010-I CAT III 500V, CAT IV 300V

Mechanical & General Specifications
Size	(L x W x H):  10 x 25 x 12.5 cm
Weight	1.3 kg
Batteries	Type AA:  6
Warranty	3 years
Battery type	Alkaline supplied, usable with 1.2V NiCD or NiMH rechargeable batteries