|
|
|
A complete automotive diagnostic package with virtually everything you need in an automotive multimeter
Modern cars have more and more electrical systems. This will only increase further with the introduction of hybrid vehicles. For this, perhaps the most important tool you'll use in troubleshooting is the multimeter. The Fluke 88V has improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional as well as new hybrid vehicles.
|
New features for maximum productivity
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Conductance for coil testing
- Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
- Peak min/max to capture intermittent events as short as 250 microseconds
- Large digit display with bright, two-level backlight makes the Fluke 88V significantly easier to read than the old Fluke 88
|
Other features
- 0.1 % dc accuracy
- 20.000 counts (4-1/2 digit) high resolution mode for precise measurements
- Measure up to 1000 V ac and dc
- Current measurements up to 10 A, 20 A for up to 30 seconds
- Built-in thermometer lets you carry one less tool (temperature probe included)
- Diode test for alternator testing
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity
- RPM measurements with inductive pickup (included)
- Millisecond pulse width measurements for fuel injectors
- Magnetic hanger to attach meter to the vehicle and free your hands for other tasks
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- AutoHOLD to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph to track changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved sleep mode draws less current for longer battery life
- Access door for fast battery changes without opening up the case
- "Classic" design with new removable holster with built in test lead and probe storage
- 10 mega-ohm input impedance won't load circuits, and is safe for computers
- Lifetime warranty
|
Safety Specification
The Fluke 80 V is independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.
|
| Technical Data |
| Voltage DC |
| Maximum voltage: |
1000 V |
| Accuracy: |
±(0.1% + 1) |
| Maximum resolution: |
10 µV |
| | Voltage AC |
| Maximum voltage: |
1000 V |
| Accuracy: |
± ([% of reading] + [counts]): 0.5% + 2 |
| AC Bandwidth: |
5 kHz |
| Maximum resolution: |
100 µV |
| | Current DC |
| Maximum current: |
10 A (20 A during 30 s) |
| Accuracy: |
±(0.4% + 2) |
| Maximum resolution: |
0.01 µA |
| | Current AC |
| Maximum current: |
10 A (20 A during 30 s) |
| Accuracy: |
±(1.2% + 2) |
| Maximum resolution: |
0.01 µA |
| | Resistance |
| Maximum resistance: |
50 MΩ |
| Maximum capacitance: |
±(0.4% + 1) |
| Maximum resolution: |
0.01 Ω |
| | Capacitance |
| Maximum capacitance: |
10,000 µF |
| Accuracy: |
±(1% + 2) |
| Maximum resolution: |
0.01 nF |
| | Frequency |
| Maximum frequency: |
200 kHz |
| Accuracy: |
±(0.01% + 1) |
| Maximum resolution: |
0.01 Hz |
| | Temperature |
| -200.0 °C - 1090 °C: |
1.0% + 10, excluding probe |
| Maximum resolution: |
0.1 °C |
| | Conductance |
| Maximum conductance: |
60.00 nS |
| Accuracy: |
±(1.0% + 10) |
| Maximum resolution: |
0.01 nS |
| | Duty Cycle |
| Maximum duty cycle: |
99.9% |
| Accuracy: |
≤ 0.2% per kHz + 0.1% |
| Maximum resolution: |
0.1% |
| | Pulse width |
|
0 - 2 s |
| Maximum resolution: |
0.1 ms |
| | RPM |
|
30 - 12000 |
| Accuracy: |
2 |
| Maximum resolution: |
1 |
|
| Environmental Specifications |
| Operating Temperature | | | Storage Temperature | |
| Safety Specifications |
| Electrical Safety |
|
CAT III, 1000 V |
|
CAT IV, 600 V |
|
| Mechanical & General Specifications |
| Size | | | Weight | | | Warranty | | | Battery Life |
| Alkaline: |
>400 hours typical |
|
|
| Model Name | Description | Price List | | Fluke 88V/A |
Fluke 88 Series V Automotive Multimeter
- Fluke 88V Automotive Meter
- User's Manual + Quick Reference Guide
|
- H80M Holster with TPAK Meter Hanging Solution
- TL224 SureGrip™ Silicone Test Lead Set
- TP220 SureGrip™ Test Probe Set
- AC285 SureGrip™ Large Jaw Alligator Clip Set
- 80BK Integrated Temperature Probe
- RPM80 Inductive Pickup Probe
- Two Automotive Back Probe Pins
- Insulation Piercing Clip
- C800 Hard Case
|
| On Request |
| Clips | Price List | | TP81 | TP81 Insulation Piercing Clip Set | On Request | | TP82 | TP82 Insulation Piercing Clip Set | On Request |
| Test Probes | Price List | | TP40 | TP40 Automotive Back Probe Pins (five) | On Request | | TP88 | TP88 Rigid Back Probe Pin Set | On Request |
| Automotive Accessories | Price List | | BP880 | BP880 BNC to Female Double Stacking Banana Plug | On Request | | BP881 | BP881 BNC to Male Double Stacking Banana Plug | On Request | | RPM80 | RPM80 Inductive Pick-Up | On Request | | TL82 | TL82 Automotive Pin & Socket Adapter Set | On Request | | TLK281 | TLK281 SureGrip™ Automotive Test Lead Kit | On Request | | TLK282 | TLK282 SureGrip™ Deluxe Automotive Test Lead Kit | On Request |
| Current clamps | Price List | | 90i-610s | 90i-610s AC/DC Current Probe (600 A) | On Request |
| Pressure | Price List | | PV350 | PV350 Pressure Vacuum Module | On Request |
| Test Leads | Price List | | TL225 | TL225 SureGrip™ Stray Voltage Adapter Test Lead Kit | On Request | | TL28A | TL28A Automotive Test Lead Set | On Request |
|
|
|
|
|
|
|
 | | Search Fluke | | | | | | | | | | | | | | | | | | | | | | | | Find Resources | | | | | | | | |
|
|
|
|
|
|
|
|
|
|
|