The most trusted tools in the world
Home  |  Products  |  Portable Oscilloscopes  |  

Fluke 190 Series II ScopeMeter® Test Tool

The first four- and two-channel scopes built for CAT IV industrial environments
  • Introducing the new 4 Channel 500 MHz ScopeMeter® Portable Oscilloscope
  • Extend your arsenal of troubleshooting capabilities by visually inspecting signals amplitude, time, shape and disturbance or distortion characteristics.
  • The Fluke 190 series combines the power of a high performance oscilloscope, multimeter and paperless recorder in an easy to use test tool you will come to rely on in the field.
Contact Me
Request A Demo
Fluke 190 Series II ScopeMeter® Test Tool
Fluke 190 Series II ScopeMeter® Test Tool
Fluke 190 Series II ScopeMeter® Test Tool
Fluke 190 Series II ScopeMeter® Test Tool
Fluke 190 Series II ScopeMeter® Test Tool

Fluke 190 Series II - 20 years of ScopeMeter® Test Tool Innovation.

As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter® 190 Series II combines an unprecedented level of performance, ruggedness, and portability. You can choose from 60MHz, 100MHz, 200MHz or 500MHz bandwidth models, with real-time sampling rates up to 5 GS/s and 200 ps resolution to capture noise and other disturbances. All models feature deep memory—up to 10,000 samples per channel— so you can examine very small parts of the waveform in detail. And all models are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.

See More, Fix More with the Two and Four-Channel CAT IV Rated Fluke ScopeMeter 190 Series II

The Fluke ScopeMeter 190 Series II combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.

The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

  • Two or four electrically isolated inputs
  • CAT III 1000V / CAT IV 600V safety rated
  • Choose from 60 MHz, 100MHz, 200MHz or 500MHz bandwidth models
  • Fast sampling rate, up to 5GS/s with up to 200 ps resolution (Depending on model and channels used)
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter in 2 Channel models
  • Quad meter measurements via scope BNC inputs in 4 channel models
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan
    • 190-X04, 4 Channel models up to 7 hour (BP291 included standard)
    • 190-XX2, 2 Channel models up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
    • Charge spare battery using optional external battery charger EBC290
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The new Fluke ScopeMeter 190 Series II portable scopes are double-insulated two and four-channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.

oscilloscope

Three-dimensional testing for industrial systems »

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:
  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift
oscilloscope

Three-phase testing for diagnosing VSD, power inverters, and converters »

  • Test for harmonics, transients and loads at the three-phase power input
  • Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
  • Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the Harshest Conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.
Meter mode

Built in multimeter to quickly and conveniently perform precise measurements.

Built-in digital multimeter 190 Series II 2 channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors. The Fluke-190-X04, 4 channel models incorporate quad meter measurements via the 4 channel scope BNC inputs.
oscilloscope

Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to seven hours in 4 channel models or up to four hours in 2 channel models. And with the easy-access battery door you can make battery swaps fast.
scopemeter usb

Capture and Share Waveforms Easily with New USB connectivity

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.
oscilloscope

See a Stable Display Instantly with Connect-and-View™ Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.
oscilloscope

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)
  • Stores events like motion profiles, UPS, power supply, and motor start-ups
  • With the Stop-on-Trigger mode, the ScopeMeter 190 series II automatically recognizes a power failure and stores the waveform data preceding it
  • With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles
oscilloscope

Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:
  • Plotting minimum and maximum peak values and average over time up to 22 days
  • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults

Specifications

Bandwidth

Fluke 190-502: 500 MHz
Fluke 190-204: 200 MHz
Fluke 190-202: 200 MHz
Fluke 190-104: 100 MHz
Fluke 190-102: 100 MHz
Fluke 190-062: 60 MHz

Number of Channels

Fluke 190-502: 500 MHz: 2 channels
Fluke 190-204: 200 MHz: 4 channels
Fluke 190-202: 200 MHz: 2 channels
Fluke 190-104: 100 MHz: 4 channels
Fluke 190-102: 100 MHz: 2 channels
Fluke 190-062: 60 MHz: 2 channels

Real-time sample rate

Fluke 190-502: 5 GS
Fluke 190-204: 2.5 GS/s
Fluke 190-202: 2.5 GS/s
Fluke 190-104: 1.25 GS/s
Fluke 190-102: 1.25 GS/s
Fluke 190-062: 625 MS/s

Inputs

4 scope or 2 scope plus DMM input

Independently floating isolated inputs

Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground

Timebase range

2 ns - 2 min/div (190-20X, 200 MHz models)

5 ns - 2 min/div (190-10X, 100 MHz models)

10 ns - 2 min/div (190-062, 60 MHz model)

Input sensitivity

2 mV-100 V/div

Trigger types

Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle

Trigger Source

Any scope input channel, or external via DMM input on 190-XX2, 2 channel models

Glitch capture

8 ns

Scope measurements

Cursor: 7
Automatic: 30

Maximum record length

ScopeRecord mode: 30,000 pts
Scope mode: 10,000 pts per input

Persistence

Digital persistence giving analog oscilloscope-like waveform decay

Waveform Compare

Waveform reference with automatic Pass/Fail testing


DMM Specification (2-channel models)

Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)

4 mm banana inputs, fully isolated from scope inputs and from scope ground

Maximum Resolution:

5000 counts

Measurements:

Vdc, Vac rms, Vac+dc rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature ºC or ºF (using optional converter)

Memory

190-XX2, 2 Channel
Screen + Setup: 30
Recording: 10

Display

153 mm full color LCD with fast update rate


Environmental Specifications

Operating Temperature

0ºC to 40ºC Including Batteries

0ºC to 50ºC Excluding Batteries

Storage Temperature

-20°C to +60°C

Operating Altitude

Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V

Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V


Safety Specifications

Electrical Safety

1,000V CAT III/600V CAT IV (EN61010-1)


Mechanical & General Specifications

Size

270 x 190 x 70 mm

Weight

2.2 kg

Warranty

3-years on main instrument, 1-year on accessories

Li-Ion Battery

190-XX2, 2 Channel models 190 BP291 4800 mAh battery up to 7 Hours included standard


Included Accessories

Two channel models

VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter demo package (restricted functionality)
USB Interface Cable

Four channel models

VPS410 Voltage Probe Sets (one red, one blue, one grey, one green)
BC190 Battery Charger/mains Adapter
BP291 4800 mAh high capacity Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter demo package (restricted functionality)
USB Interface Cable

Warranty

Three years on main instrument, one year on accessories

Model NameDescriptionPrice List
Fluke-190-502Color ScopeMeter, 500 MHz, 2 channels plus DMM/Ext.inputOn Request
Fluke-190-502/SColor ScopeMeter, 500 MHz, 2 channels plus DMM/Ext.input, with SCC-290 KitOn Request
Fluke-190-062

Color ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input

On Request
Fluke-190-062/S

Color ScopeMeter, 60 MHz, 2 channels plus DMM/Ext.input, with SCC-290 Kit

On Request
Fluke-190-102

Color ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input

On Request
Fluke-190-102/S

Color ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input with SCC-290 Kit

On Request
Fluke-190-104Color ScopeMeter, 100 MHz, 4 channels plus DMM/Ext.inputOn Request
Fluke-190-104/SColor ScopeMeter, 100 MHz, 4 channels plus DMM/Ext.input with SCC-290 KitOn Request
Fluke-190-202

Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input

On Request
Fluke-190-202/S

Color ScopeMeter, 200 MHz, 2 channels plus DMM/Ext.input, with SCC-290 Kit

On Request
Fluke-190-204Color ScopeMeter, 200 MHz, 4 channels plus DMM/Ext.input On Request
Fluke-190-204/SColor ScopeMeter, 200 MHz, 4 channels plus DMM/Ext.input, with SCC-290 KitOn Request

Accessory KitsPrice List
MA190MA190 Accessory kit for medical and video applications.On Request

Batteries, Chargers and AdaptersPrice List
BP2902400 mAh Li-ion battery for Fluke 190 Series IIOn Request
BP2914800 mAh High capacity Li-ion battery ) for Fluke 190-seriesIIOn Request
BC190BC190 Line Voltage Adapter / Battery ChargerOn Request
EBC290EBC290 External Battery Charger, charges BP291 while outside instrumentOn Request

Cases and HolstersPrice List
C195C195 Soft Case On Request
C290Hard Shell Protective Carrying Case for Fluke 190-series IIOn Request

Current clampsPrice List
80i-110s80i-110s AC/DC Current Probe (100 A)On Request
CS20MACS20MA Current Shunt, 4~20 mA, 30V CAT IIIOn Request
i3000 Flex-4PKFluke i3000 Flex AC Current Clamp, 4 PackOn Request
i30sFluke i30s AC/DC Current ClampOn Request
i1000si1000s AC Current Clamp (1000 A)On Request
i1010i1010 AC/DC Current ClampOn Request
i200si200s AC Current ClampOn Request
i3000si3000s AC Current ClampOn Request
i310si310s Current ProbeOn Request
i400si400s AC Current ClampOn Request
i410i410 AC/DC Current ClampOn Request
i5Si5S AC Current ClampOn Request

OptionsPrice List
SCC290FlukeView Software for ScopeMeter (SW90W) and Carrying Case (C290) KitOn Request
HH290Hanging Hook for ScopeMeter 190-Series IIOn Request

SoftwarePrice List
SW90WSW90W FlukeView ScopeMeter Software (full version)On Request

Test Leads, Probes and ClipsPrice List
AS400AS400 Probe accessory extension setOn Request
PM9081PM9081 Dual Banana Plug (male) to Female BNC AdapterOn Request
PM9082PM9082 Dual Banana Jack (female) to male BNC AdapterOn Request
PM9091PM9091/001 Coaxial BNC cable set, color coded, 3 pcs, 1.5m eachOn Request
PM9093PM9093 Male BNC to Dual Female BNC AdapterOn Request
PM9096/201PM9096/201 Secondary Ignition Pickup, 1000:1On Request
RS400RS400 Probe Accessory Replacement SetOn Request
VPS410-BScopeMeter Voltage Probe-set, blue, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV On Request
VPS410-VScopeMeter Voltage Probe-set, green, 10:1, 300 MHz, 1000V CAT III, 600V CAT IVOn Request
VPS410-GScopeMeter Voltage Probe-set, grey, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV On Request
VPS410-RScopeMeter Voltage Probe-set, red, 10:1, 300 MHz, 1000V CAT III, 600V CAT IVOn Request
STL120-IIISTL120-III Shielded Test Leads SetOn Request
TL910TL910 Electronic Test ProbesOn Request
TRM50Coaxial Feed-through BNC Male to BNC Female Cable Terminator. Consists of Set of 2, 50Ohm, 1000V CAT III, Max Power 1WOn Request
VPS101VPS101 – Voltage Probe Set, 1:1, one blackOn Request
VPS410-II-BScopeMeter Industrial Voltage Probe-set, blue, 10:1, 500 MHzOn Request
VPS410-II-RScopeMeter Industrial Voltage Probe-set, red, 10:1, 500 MHzOn Request
VPS410-II-VScopeMeter Industrial Voltage Probe-set, green, 10:1, 500 MHzOn Request
VPS420-BRuggedized High-Working ScopeMeter Voltage Probe-set, blue/black, 100:1, 150 MHz, 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV.On Request
VPS420-GRuggedized High-Working ScopeMeter Voltage Probe-set, grey/black, 100:1, 150 MHz, 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV.On Request
VPS420-RRuggedized High-Working ScopeMeter Voltage Probe-set, red/black, 100:1, 150 MHz, 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV.On Request
VPS420-VRuggedized High-Working ScopeMeter Voltage Probe-set, green/black, 100:1, 150 MHz, 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV.On Request
VPS510-BScopeMeter® Compact Probe for electronic applications, blue, 10:1, 500 MHz, 300 V CAT III On Request
VPS510-GScopeMeter® Compact Probe for electronic applications, grey, 10:1, 500 MHz, 300 V CAT IIIOn Request
VPS510-RScopeMeter® Compact Probe for electronic applications, red, 10:1, 500 MHz, 300 V CAT IIIOn Request
VPS510-VScopeMeter® Compact Probe for electronic applications, green, 10:1, 500 MHz, 300 V CAT IIIOn Request

PressurePrice List
PV350PV350 Pressure Vacuum ModuleOn Request

TemperaturePrice List
80CK-M80CK-M Male Mini Connectors (Type K)On Request
80PJ-180PJ-1 Bead ProbeOn Request
80PK-180PK-1 Bead Probe (Type K) On Request
80PK-2280PK-22 Immersion Probe On Request
80PK-2480PK-24 Air Probe On Request
80PK-2580PK-25 Piercing Probe On Request
80PK-2680PK-26 General Purpose ProbeOn Request
80PK-2780PK-27 Industrial Surface ProbeOn Request
80PK-3A80PK-3A Surface Probe (Type K)On Request
80PK-880PK-8 Pipe Clamp Temperature Probe (Type K)On Request
80PK-980PK-9 General Purpose Probe (Type K)On Request
80PK-EXT80PK-EXT Extension Wire Kit (Type K)On Request
80T-150UA80T-150U Universal Temperature Probe (for DMMs)On Request
80TK80TK Thermocouple Module (Type K)On Request

Test LeadsPrice List
TL175TL175 TwistGuard™ Test Leads On Request
TL220TL220 SureGrip™ Industrial Test Lead KitOn Request
TL224TL224 SureGrip™ Silicone Test Lead SetOn Request
Related Products
 
 Hard Shell Protective Carrying Case for Fluke 190-series II »
 
 PM9082 Dual Banana Jack (female) to male BNC Adapter »
 
 VPS420-B ScopeMeter Voltage Probe Set  »
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2014 Fluke Corporation