Keep your world up and running.
Home  |  Products  |  Electrical Testers  |  Electrical Testers  |  

Fluke T5-1000 Voltage, Continuity and Current Tester

Fluke T5 Continuity, Current and Non Contact Voltage Tester
Fluke T5-1000 Voltage, Continuity and Current Tester
Fluke T5-1000 Voltage, Continuity and Current Tester
Electrical tester with OpenJaw™ Current

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.

  • Automatically measures volts ac and volts dc with precise digital resolution
  • Displays resistance to 1000Ω
  • Easy and accurate OpenJaw™ current measurement
  • Continuity beeper
  • Compact design with neat probe storage
  • Rugged enough to withstand a 10-foot (3m) drop
  • Detachable SlimReach™ probe tips are customized for national electrical standards
  • Test leads accept Fluke accessory test clips
  • Available in 600V and 1000V models
  • Can stay connected much longer than solenoid type tester
  • Auto off mode to conserve battery life
  • Optional holster attaches to a belt and neatly stows test leads

Safety Conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V.

Continuity beeper
Threshold:   On at <25 Ω, off at >400 Ω
Volts indicator LED
Threshold:  Guaranteed on by 30V ac

Environmental Specifications
Operating Temperature
 -10 °C to 50 °C
Storage Temperature
 -30 °C to 60 °C
Humidity (Without Condensation)
 0% to 95% (5 °C to 30 °C)
 0% to 75% (30 °C to 40 °C)
 0% to 45% (40 °C to 50 °C)
Dust/water resistance
Operating Altitude
 2000 meters max
Temperature Coefficient
 0.1 x (specified accuracy)/degree C (<18 °C or >28 °C)

Safety Specifications
Overvoltage category
T5-600:   600V ac/dc, CAT III
T5-1000:  1000V ac/dc, CAT III
600V ac/dc, CAT IV
Agency Approvals
 UL, CSA, and VDE
Maximum voltage
 between any terminal and earth ground

Mechanical & General Specifications
 30.5 x 51 x 203 mm
 2 years
Battery Life
 200 hour zinc chloride, 400 hour alkaline
Battery type
 Two AA zinc chloride
Low battery indicator
Current sensor opening
 12.9 mm
Calibration cycle
 1 year
Test leads
Type:  Heavy duty, flexible leads rated for 1000V use.
 Field replaceable leads terminate in male shrouded banana plugs
Probes:  One red, one black. of two tip
 Detachable Slim-ReachT probe tips in one
Styles:  TP1 Slim Reach Test Probes
Model NameDescription
Fluke T5-1000 1000V Voltage, Continuity and Current Tester

All models include:

  • 4 mm detachable probes
  • Instruction sheet

AC220AC220 SureGrip™ Alligator Clip Set
AC285AC285 SureGrip™ Alligator Clip Set

Test Probes
TLK291TLK291 Fused test probe set
TP1TP1 Slim Reach Test Probe (flat blade)
TP2TP2 Slim Reach Test Probe (2 mm)
TP4TP4 Slim Reach Test Probe (4 mm)

Cases and Holsters
T5-KitACC-T5 Kit for use with Fluke T5
C101C101 Hard Case
C520AC520A Leather Tester Case
C150Soft Carrying Case
H5H5 Electrical Tester Holster (Fluke T3/T5)
Related Products
 Fluke T5-600 Voltage, Continuity and Current Tester »
 Electrical Tester Kit with Holster and 1AC II »
Home  |   Site Map  |   Fluke Corporation  |  Safety Notices
Privacy Statement  |  Terms of Use   |  Terms and Conditions of Sale  |  Terms and Conditions of Service
© 1995 - 2018 Fluke Corporation