Keeping your world up and running.
Home  |  Products  |  Process Calibration Tools  |  Pressure Calibrators  |  

Fluke 718 100G Pressure Calbrator

 Fluke 718

The complete solution to pressure calibration

The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

  • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
  • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
  • Error % calculation for quicker pass/fail decision making in the field
  • Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage
  • Min/Max/Hold to capture changing measurements
  • Switch test feature for quicker and more accurate pressure switch testing
  • New 1 and 300 PSI pressure ranges mean fewer extra tools required
  • 1, 30, 100 & 300 PSI ranges now available

 

Technical Specifications
Standard
718 Series  
Measure Pressure  (internal sensor)
Accuracy  0.025% full scale
Functions  zero, min/max, hold, damp
Note:  Dry air, non-corrosives only
   
718 1G  
Range:  -1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution:  0.0001 psi, 0.001 mbar, 0.0001 kPa
Over Pressure:  5x Full Scale
Functions:  Zero, Min, Max, Hold, Damp
   
718 30G  
Range:  -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Resolution:  0.001 psi, 0.1 mbar, 0.01 kPa
Over Pressure:  5x Full Scale
Functions:  Zero, Min, Max, Hold, Damp
   
718 100G  
Range:  -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Resolution:  0.01 psi, 0.1 mbar, 0.01 kPa
Over Pressure:  2x Full Scale
Functions:  Zero, Min, Max, Hold, Damp
   
718 300G  
Range:  -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )
Resolution:  0.01 psi, 1 mbar, 0.1 kPa
Over Pressure:  375 PSI 25 bar
Functions:  Zero, Min, Max, Hold, Damp
Fluke 718 series via using 700 Series Pressure Modules
Range:  29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
Resolution:  Per pressure module specs
Accuracy:  To 0.025 % of full span, per pressure module specs
Functions:  Zero, Min, Max, Hold, Damp
 Note: media compatibility per pressure module specs
Fluke 718 series via built in pump
Range:  -12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop Power:  Range: 24 V dc
 Accuracy: +/- 10 %
 Note: Drive; 20 mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8 V
mA Measure:  Range: 0 mA to 24 mA
 Resolution: 0.001 mA
 Accuracy: 0.015 % + 1 count

 

General Specifications
Maximum voltage
 30 volts: Non-operating
Temperature
 -40 °C to 60 °C
Operating Temperature
 -10 °C to 55° C
Relative Humidity
 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)
Operating Altitude
 3,000 M max
Shock
 1 M drop test
Vibration
 Random, 2 g, 5 Hz – 500 Hz
Safety
 CSA C22.2 No. 1010.1: 1992
EMC
 EN50082-1: 1992 and EN55022: 1994 Class B
Size
 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)
Weight
 992 g (35 oz)
Power, battery life
 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery Life
 4 to 20 hours typical, depending on functions used
Warranty
 Three years (one year on pressure pump in Fluke 718)
Display
 LCD, 5 digit pressure and current simultaneous
Note
 For use with non-corrosive gasses
Model NameDescriptionPrice List
Fluke 718 1G Pressure Calibrator -1 to 1 PSI, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa)

All models include:

  • Protective Yellow Holster with test lead storage
  • Instructions Sheet (14 languages)
  • Test Leads and Alligator Clip
  • Two 9V alkaline batteries
  • NIST - Traceable calibration report and data
On Request
Fluke 718 30GPressure Calibrator -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa) On Request
Fluke 718 100GPressure Calibrator -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa) On Request
Fluke 718 300GPressure Calibrator -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa ) On Request

ClipsPrice List
AC220AC220 SureGrip™ Alligator Clip SetOn Request

Test ProbesPrice List
TP220TP220 SureGrip™ Industrial Test ProbesOn Request

Differential Pressure ModulesPrice List
700P00700P00 Differential Pressure Module (2.5 mbar)On Request
700P01700P01 Differential Pressure ModuleOn Request
700P02700P02 Differential Pressure Module (70 mbar)On Request
700P03700P03 Differential Pressure Module (340 mbar)On Request
700P04700P04 Differential Pressure Module (1000 mbar)On Request

Differential Pressure Module WetPrice List
700P22700P22 Differential Pressure Module Wet (70 mbar)On Request
700P23700P23 Differential Pressure Module Wet (340 mbar)On Request
700P24700P24 Differential Pressure Module WetOn Request

Absolute Pressure ModulesPrice List
700PA3700PA3 Absolute Pressure Module (340 mbar)On Request
700PA4700PA4 Absolute Pressure ModuleOn Request
700PA5700PA5 Absolute Pressure Module (2 bar)On Request
700PA6700PA6 Absolute Pressure Module (7 bar)On Request
700PRV700PRV Pressure Relief Valve KitOn Request
700PRV700PRV Pressure Relief Valve KitOn Request
700PRV700PRV Pressure Relief Valve KitOn Request
700PRV700PRV Pressure Relief Valve KitOn Request
700PRV700PRV Pressure Relief Valve KitOn Request

Cases and HolstersPrice List
C101C101 Hard CaseOn Request
C550C550 Tool BagOn Request
C789C789 Soft Meter CaseOn Request
CXT280CXT280 Extreme CaseOn Request

Dual Pressure ModulesPrice List
700PD2700PD2 Dual Pressure Module (± 70 mbar)On Request
700PD3700PD3 Dual Pressure Module (± 340 mbar)On Request
700PD4700PD4 Dual Pressure Module (±1000 mbar)On Request
700PD5700PD5 Dual Pressure Module (-1000/+2000 mbar)On Request
700PD6700PD6 Dual Pressure Module (-1000 mbar/+6.9 bar)On Request

Vacuum Pressure ModulesPrice List
700PV3700PV3 Vacuum Pressure Module (-340 mbar)On Request
700PV4700PV4 Vacuum Pressure Module( -1000 mbar)On Request

Test LeadsPrice List
TL220

SureGrip™ Industrial Test Lead Set includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Insulated Test Probe Set
  • TL224 SureGrip™ Silicone Test Lead Set (right to right)
  • One year warranty
On Request
TL223TL223 Electrical Test Lead SetOn Request
TL224TL224 SureGrip™ Insulated Test LeadsOn Request
TL71TL71 Premium Test Lead SetOn Request
TL221TL221 SureGrip™ Extension Lead SetOn Request
TL75TL75 Hard Point™ Test Lead SetOn Request
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices
Privacy Statement   |   Terms of Use  |   Terms and Conditions of Sale
© 1995 - 2017 Fluke Corporation