| Thermal Imager Software Downloads To ensure your product has the latest software release that include new features, click on the appropriate link below and follow the download instructions.
| | For model numbers
Ti9, Ti10, Ti25, Ti27, Ti29, Ti32, Ti40, Ti40FT, Ti45, Ti45FT, Ti50, Ti50FT, Ti55, Ti55FT, Ti100, Ti105, Ti110
Ti125, TiR, TiR1, TiR2, TiR2FT, TiR3, TiR3FT TiR4, TiR4FT, TiR27, TiR29, TiR32, TiR105, TiR110, TiR125
TiS and VT02 | What's new with SmartView® 3.3 software Download the latest version here » - Support for Windows 8
- Upgrade Ti1xx imagers to enable communication with CNX™ 3000 Wireless Test Tools*
- Connect your Ti1xx thermal imager to SmartView and select, "Enable CNX wireless system" to increase the capabilities of your thermal imager
- Support for CNX Wireless measurements captured with Ti1xx series thermal imagers
- Measurements from Fluke CNX 3000 series Test Tools are saved with thermal images for additional analysis and inclusion in reports
- Report template customization incorporated into Microsoft® Word 2010
- Fully customize your reports to meet your needs
- Apply a severity rating to each image
- Rate each image with a user defined severity rating system to easily prioritize actions
- Include an automated inspection summary in reports
- Summarize the items inspected including the severity rating for each image to quickly navigate to report pages with top priority
- Note: Help files are in English only
* - Not available in all countries InsideIR 4.0 Upgrade | | For model numbers Ti20 and Ti30. | Download this software upgrade here » For installation instructions, please download the README document prior to downloading. For maximum results delete the temporary folder c:\InsideIR 4.0Install\ after sucessful installation InsideIR 4.0 features: - Advanced Analysis Tools – points, lines, rectangles, ellipses, polygons, and curved areas.
- Enhanced profile tool
- Trending
- Increased routing flexibility.
- Reporting enhancements:
- Advanced reports, trending reports and up to four pages per image.
Available in multi-language support Spanish, Portuguese, French, German, Italian, Swedish, Czech, Japanese, Russian and English. Software automatically checks the Fluke website and tells user if newer software version is available.
Fluke Ti30 Thermal Imager | | To ensure you have the latest version of operating firmware, please download this file and save it to your hard drive. Double-click on the .exe file below to load and follow instructions. Note: The setup.exe file must run from the local hard drive with read and write access.
Firmware Upgrade Version 1.5 »
Added controls in the manual and semi auto modes of the Ti30 giving the user increased control over any unexpected temperature fluctuations while taking a measurements. | | |