The most trusted tools in the world
Home  |  Products  |  Process Calibration Tools  |  Loop Calibrators  |  

Fluke 789 ProcessMeter™

Fluke 789
Double Your Power

The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.

Features of the Fluke 789
  • 24 V Loop power supply
  • Very large dual display
  • Enhanced backlight with 2 brightness settings
  • 1200 ohm drive capability on mA source
  • HART mode setting with loop power and a built-in 250 ohm resistor
  • 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
  • Externally accessible fuses for easy replacement
  • Infrared-port to process data in FlukeView Forms (V2.1) software


Fluke 789 features that are also included in the Fluke 787
  • Precision 1000 V, 440 mA True-RMS digital Multimeter
  • 0.1% dc voltage accuracy
  • 0.05% dc current accuracy
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode Test and Continuity Beeper
  • Simultaneous mA and % of scale readout
  • 20 mA DC current source / loop calibrator / simulator
  • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes

Safety Conformance

Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards.

Specifications
Current Measurement
Range:  0-1 A AC or DC
Resolution:  1 mA
Accuracy:  0.2% + 2 LSD (DC)
 
Range:  0-30 mA
Resolution:  0.001 mA
Accuracy:  0.05% + 2 LSD
Current Sourcing
Range:  0-20 mA or 4-20 mA
Resolution:  0.05% of span
Drive Capability:  24 V Compliance or 1200 Ω @ 20 mA
Frequency
 to 19.999 kHz, 0.005% + 1 LSD
Continuity
 Beeps for resistance < 100 Ω
Voltage measurement
Range:  0-1000 V AC (true-rms) or DC
Resolution:  0.1 mV to 1.0 V
Accuracy:  0.1% Rdg + 1 LSD (VDC)
Resistance measurement
 to 40 MΩ, 0.2% + 1 LSD
Diode test
 2.0 V shows diode voltage drop
Display current and % of span
 Yes
Auto step, auto ramp
 Yes

Environmental Specifications
Operating Temperature
 -20 ºC to 55 ºC
Storage Temperature
  -40 ºC to 60 ºC
Humidity (Without Condensation)
 95% up to 30 ºC
 75% up to 40 ºC
 45% up to 50 ºC
 35% up to 55 ºC
Temperature Coefficient
 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC)

Safety Specifications
Electrical Safety
 Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92
Overvoltage category
 IEC 1010-1 CAT III 1000 V
 IEC 1010-1 CAT IV 600 V
Maximum voltage
 1000 V rms

Mechanical & General Specifications
Size
 50 x 100 x 203 mm (1.25" H x 3.41"W x 7.35" L)
Weight
 610 g (1.6 lbs)
Batteries
 4 AA Alkaline batteries
Warranty
 3 years
Battery Life
 140 hours typical (measurement), 10 hours typical (sourcing 20 mA)
Shock & Vibration
 Random, 2 g, 5-500 Hz
 1 meter drop test
Model NameDescriptionPrice List
Fluke 789ProcessMeter
  • AC175 Alligator Clips
  • Four AA 1.5 V alkaline battery (installed)
  • TL71 Safety-Designed Test lead Set
On Request

ClipsPrice List
AC220AC220 SureGrip™ Alligator Clip SetOn Request
AC280AC280 SureGrip™ Hook ClipsOn Request
AC283AC283 SureGrip™ Pincer ClipsOn Request
AC285AC285 SureGrip™ Alligator Clip SetOn Request
AC87AC87 Heavy Duty Bus Bar Clip SetOn Request
AC89AC89 Heavy Duty Insulation Piercing Test ClipOn Request
BP980BP980 Double Banana Plug KitOn Request

Test ProbesPrice List
TL910TL910 Electronic Test ProbesOn Request
TP1TP1 Slim Reach Test Probe (flat blade)On Request
TP2TP2 Slim Reach Test Probe (2 mm)On Request
TP220TP220 SureGrip™ Industrial Test ProbesOn Request
TP38TP38 Slim Reach Test Probe (insulated)On Request
TP74TP74 Lantern Tip Test ProbesOn Request
TP80TP80 Electronic Test ProbesOn Request
TP912TP912 Replacement Tips for TL910On Request
TP920TP920 Test Probe Adapter KitOn Request

Cases and HolstersPrice List
C100C100 Hard Meter and Accessory CaseOn Request
C125C125 Soft Meter Case On Request
C25C25 Soft Meter CaseOn Request
C510C510 Leather Meter CaseOn Request
C781C781 Meter CaseOn Request
CXT80CXT80 Extreme CaseOn Request
Fluke MeterCleaner WipesFluke MeterCleaner WipesOn Request
TPAKTPAK ToolPak, Meter Hanging KitOn Request

Current clampsPrice List
i1010i1010 AC/DC Current ClampOn Request
i200i200 AC Current ClampOn Request
i410i410 AC/DC Current ClampOn Request

Fiber OpticsPrice List
FOM Fiber Optic Meter FOM Fiber Optic MeterOn Request
FOS-850FOS-850 Fiber Optic Light SourceOn Request
FOS-850/1300FOS-850/1300 Fiber Optic Light SourceOn Request

High Voltage ProbesPrice List
80k-1580K-15 High Voltage ProbeOn Request
80K-4080K-40 High Voltage ProbeOn Request
80K-680K-6 High Voltage ProbeOn Request

SoftwarePrice List
FlukeView FormsFlukeView Forms Software with cableOn Request

Test Leads, Probes and ClipsPrice List
TL80ATL80A Basic Electronic Test Lead SetOn Request

PressurePrice List
PV350PV350 Pressure Vacuum ModuleOn Request

TemperaturePrice List
80PK-2480PK-24 Air Probe On Request
80PK-2680PK-26 General Purpose ProbeOn Request
80T-150UA80T-150U Universal Temperature Probe (for DMMs)On Request
80TK80TK Thermocouple Module (Type K)On Request

Test LeadsPrice List
H900H900 Test Lead HolderOn Request
TL27TL27 Heavy Duty Test Lead SetOn Request
TL220TL220 SureGrip™ Industrial Test Lead KitOn Request
TL221TL221 SureGrip™ Extension Lead SetOn Request
TL222TL222 SureGrip™ Silicone Test Lead SetOn Request
TL223TL223 SureGrip™ Electrical Test Lead KitOn Request
TL224TL224 SureGrip™ Silicone Test Lead SetOn Request
TL238TL238 SureGrip™ Test Lead Set for High Energy EnvironmentsOn Request
TL28ATL28A Automotive Test Lead SetOn Request
TL40TL40 Retractable Tip Test Lead SetOn Request
TL71TL71 Test Lead SetOn Request
TL75TL75 Hard Point Test Lead SetOn Request
TL76TL76 All-in-one Test Lead SetOn Request
TL81ATL81A Deluxe Electronic Test Lead SetOn Request
TL930TL930 Patch Cord Set (60 cm)On Request
TL932TL932 Patch Cord Set (90 cm)On Request
TL935TL935 Patch Cord Kit (60, 90, 120 cm)On Request
TL940TL940 Mini-Hook Test Lead SetOn Request
TL950TL950 Mini-Pincer Test Lead SetOn Request
TL960TL960 Micro-Hook Test Lead SetOn Request
TL970TL970 Hook and Pincer KitOn Request
Home   |   Site Map   |   Fluke Corporation   |   Safety Notices  |   Terms and Conditions   |   Privacy Statement   |   Disclaimer © 1995 - 2013 Fluke Corporation